DB9 female to mini DIN 6 / PS2 male
NOTE! Does not convert an RS232 signal to a PS/2 mouse signal.
49.31 €
Item numberCNV-RS232F-PS2M
DB9 female to mini DIN 6 / PS2 male
NOTE! Does not convert an RS232 signal to a PS/2 mouse signal.
Null modem adapter
1 x DB9 male and 1 x DB9 male connector
With screws for fixed mounting
26 pin for soldering
Gold-plated
D-SUB 3 ROWS
26 PIN
Gold-Plated
D-SUB 3 ROW
9"
Resistive ARM/NXP i.MX8MMini 1.6GHz
2GB
RS-232 / RS-485
USB
GLAN
Audio
Mini PCIe
eMMC
microSD
USB C
4 pins
Female plug
10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm
PoE In: Max 95 Watts
PoE Out: Max 65 Watts
Weight: 189g
5VDC power supply (mains adapter) for the USA.
100 - 245VAC input
DC Jack 5.5 / 2.1mm
75cm cable
9"
Resistive Capacitive ARM/NXP i.MX8MMini 1.6GHz
1GB 2GB 4GB
RS-232 RS-485
USB
GLAN
Mini PCIe
eMMC
microSD
FB6500A compact CPU board
NS Geode GX1 200-300 MHz CPU
NS CS5530(A) chipset, UMA
32MB SDRAM onboard, 64MB option
10/100M Ethernet, RJ-45
CRT/LCD/LVDS, 1.5-4MB shared memory
3 x RS-232C, 1 x RS-232C/RS-485
2 x USB, TTL I/O (2 in, 2 out)
Parallel port, PCI IDE interface
Audio, watchdog, PS/2 KB/mouse
+5V, 2.5A max (without LCD)
127 x 127 mm
RS232 optical isolator, BR up to 57.6k
Optical isolation: 2500 constant, 7.5kV surge
DB9 male and DB9 female
Powered from RS232 control signal channels TXD, RTS, DTR
Mode: Asynchronous, Dual duplex, transparent data
USB-C
Female plug
Round plug heads
USB-C
Male Plug
Oval Plug head
Fanless design (embedded heat pipe cooling solution)
12/13 generation CoreTM i9/i7/i5/i3 processor (Alder Lake-S/Raptor Lake-S)
Up to 60W GPU MXM module expansion
802.3af (15.4W)/802.3at(25.5W) Gigabit PoE ports
DP x2 + HDMI x 1 and DVI x 1 (supports 4 independent displays)
On/off delay control / configurable ignition current control
Supports TPM 2.0 and Time-Sensitive Networking (TSN)
Two mPCIe for optional WiFi/3G/4G/GPS or I/O expansion supported
Front-accessible I/O
1 x M.2 B for storage or 5G/LTE +1 x M.2 E-key for WiFi/BT
1 x M.2 M for NVMe SSD
285x230x 90 mm (9.84" x11.50" x 3.54"), fanless 285x230x110 mm (9.84" x11.50" x 4.33"), w/ FAN
DC 9~36V input
CE, FCC Class A, E-mark
optional extras
TNC to TNC male feeder connector Extension antenna Coaxial Cable 10M for Trimble RTK GNSS GPS antenna receiver
TNC to TNC male feeder connector Extension antenna Coaxial Cable 5M for Trimble RTK GNSS GPS antenna receiver
120W USB Charging Station
GaN Charger Charging Hub 5
PD 3.0, QC 3.0, AFC, FCP, SCP, PPS fast charging protocol
Max. output on port 100watt
Apple 20W PD and Samsung PPS45W fast Charging
Load Charing: 1 port charging on USB-C 100watt, If 2 Port Charging on USB-C 65W and 45W, If 3 port USB-C 65W,30W,20W
Load Charing USB-A: 1 port charingin on USB-A 18, 2 port 12W
If all 5 ports in use: 65W, 30W, 20W, 10W(USB-A), 10W(USB-A)
230Vac supply
Transmitter to BOOST-HDMI150-U-IRR receiver
Transmits HDMI video and audio and USB up to 150 meters over network cable
Transmits HDMI video and audio and USB over local network
USB is only for keyboard and mouse
Sends
1920x1080 @60Hz
One transmitter to multiple receivers over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet
Built-in ESD protection system
Power supply: DC 5V/1A (included)
Dimensions: 92 x 70 x 25 mm
Receiver to transmitter BOOST-HDMI150-U-IRT
HDMI video and audio and USB up to 150 meters over network cable
HDMI video and audio and USB over local network
USB is only for keyboard and mouse
Recipient
1920x1080 @60Hz
Multiple receivers to transmitter over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Receiver: 1 x HDMI, 2 x USB-A, 1 x RJ45 Ethernet
built-in auto-adjustment system
Built-in ESD protection system
Power supply: DC 5V/1A (included)
Dimensions: 92 x 70 x 25 mm