Temperature sensor / Transmitter

Temperature sensor / Transmitter

Temperature sensor / Transmitter
There are 28 products.
7 x inputs for temperature sensors (differential), Pt100, Pt1000. Modbus TCP / IP, UTD

Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
1 x RJ45 port Ethernet
Dual Watchdog
Operating temperature range: -25 to + 75 ° C
I / O Pair-connection input is mirrored in the other's output
7 x RTD Interface: Pt100, Pt1000, Ni120, CU100, CU1000
Differentialindgange to the temperature sensor, 2 and 3-wire solution
16bit
Supply voltage: 10 - 30VDC / 2.5watt

352.82 €
Item numberETHIO7RTD-I
On the way in
Waterproof temperature sensor with 1-wire interface. Dallas DS18B20 chip. -55 - + 125 ° C

Digital temperature sensor with 1-wire interface
Sensor diameter: 5.5mm
Sensor length: 50mm
Cable: 1 meter
3-wire cable: + 5VDC, GND, data
Max distance from feel to controller is 185 meters
IP66
stainless steel sensor

33.63 €
Item numberX-DTS-S3C
Physically in stock
1-Wire Temperature and Humidity sensor for Web-based X-4XX and X-600M controllers. -40 - +80°C

1-wire combi sensor for temperature and humidity
3 connections: +5VDC, Gnd, data
Max. length of cable to controller: 180 metres
Mounting bracket for wall
Mounting bracket for penetration
Temperature range: -40 - +80°C
Accuracy: ± 0.4°C (0°C to 80°C)
Humidity range: 0 - 100% RH
Not suitable for environments with repeated or prolonged condensation
Accuracy: ± 2%
Sensor type: Digital 1-wire (Maxim DS18B20)
Cable length: 3 meters
Probe length: 100 mm
Probe diameter: 17.5 mm

284.75 €
Item numberX-DTHS-P
Physically in stock
ICPDAS WISE-7118ZL is a controller with 10 x analog input and 6 x digital output. Also for thermocoupler

Intelligent Controller with Web Server
Logical functions, such as: IF-THEN-ELSE
No programming. Just select, click and finish
Supporter: I/O module, counter, hour, e-mail
Modbus / TCP protocol for SCADA software Seamless integration
IEEE 802.3af compatible power over Ethernet ( Poe)
1 x RJ45 - 100Mbit Ethernet
7 x Analog input: 0 - +/-2.5V, 0 - 20mA (ext. Resistors)
A/I Resolution: 16bit
10 Samples per Second
A/I Also to Thermocouller: J, K, T, E, R, S, B, B, C, L, M, LDIN43710
6 x Digital Output: 0 - + 50VDC / 700mA Open Collector
Supply voltage: POE or 12 - 48VDC / 4.5Watt

444.48 €
Item numberL-CON10TC6O
On the way in
4-20mA transmitter for PT100, including 3-wire PT.100 sensor, steel and 2M steel-Flex cable

Pt.100 transmitter for your mounting
2 - 3-wire pt.100 sensor (red to 16, 2 x blue to 18 and A2
24v to 15 and 26
4 - 20 mA power Out of 16 and 26
4 - 20 mA The output gives power to PLC / instrument
Including PT100 feel with 80mm, Ø4MM Steel Tips
2 meter Flex cable
Supply voltage: 24VDC
Dim : H 74 x L 105 x B 22 mm

110.68 €
Item numberDC-TEMP-DIN+
Physically in stock
7 x inputs for temperature sensors (differential), Pt100, Pt1000, Ni120, CU100, CU1000, 2 x RJ45 LAN

Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
2 x RJ45 port Ethernet - Daisy chain to the next module
Dual Watchdog
Operating Temperature Range: -25 to + 75 ° C
I / O Pair-connection input is mirrored in the other's output
7 x RTD Interface: Pt100, Pt1000, Ni120, CU100, CU1000
Differentialindgange to the temperature sensor 2 and 3- wire
16bit resolution
Power supply: PoE or 10 - 30VDC / 2.5watt
PoE is NOT passed on to the next module - only data.

511.08 €
Item numberETHIO7RTD-P2I
On the way in
Advanced 7-Channel Temperature Sensor with Dual LAN Ports

7 pcs. differentialindgange for temperature sensor
Pt-100, Pt-1000, Ni120, Cu100/1000
With built-in 2 port ethernet switch
LAN Daisy Chain to the next module
Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
16 bit resolution - 12 samples / second
Good communication security
Dual Watchdog
Operating temperature: -25 to + 75 ° C
I / O Pair compound. Mirroring input to output
Supply voltage: 10 - 30VDC / 3watt

395.30 €
Item numberETHIO7RTD-2I
On the way in
7 x inputs for temperature sensors (differential), Pt100, Pt1000. Modbus TCP/IP, UTD. PoE

Built-in Web server
Web HMI
Modbus TCP and Modbus UDP protocols
Good communication security
1 x RJ45 port Ethernet
Dual Watchdog
Operating temperature range: -25 to + 75 ° C
I / O Pair-connection input is mirrored in the other's output
7 x RTD Interface: Pt100, Pt1000, Ni120, CU100, CU1000
Differentialindgange to the temperature sensor, 2 and 3-wire solution
16bit
Power supply: PoE or 10 - 30VDC / 2.5watt

395.30 €
Item numberETHIO7RTD-P-I
On the way in
Web-enabled temperature and moisture module for 1-wire sensors. Up to 16 Sensors with Log

Web-based temperature and moisture data loggs
1-wire bus for a maximum of 16 sensors (Temp / Moisture)
Permissions: Administrator, Manager, User
Tasks
50 Scheduled
50 Conditional
20 Override Schemes
Email Alarms, Custom (Encrypted Email Servers, such as Gmail)
Real Time Clock With NTP Server Synchronization
No Software Required
Basic Script Support for Advanced Flexibility
Configurable logging
Graph (logged data)
HTTPS / TLS encrypted
static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtration
On-site updates
Robust cabinet for DIN rail / wall
Supply voltage: POE or 9 - 28VDC, 134mA

524.07 €
Item numberX-405-E
Physically in stock
K-Thermo sensor box for 1-wire adapter. K-Temperature sensor is not included -200 - + 260 ° C. Adapter with 1-Wire Dallas Chip

1-wire adapter box for K Thermopler element
acquire K-thermocoupler sensor
adapter with built-in DS18B20 Chip
interface is + 5VDC, GND, data
screw terminal for K-Thermoføler

194.70 €
Item numberX-TC1W-K
Physically in stock
ICPDAS I-7015 is a module for 6 x temperature sensors 2-3 Wire, PT100, PT1000, NI120, CU50 / 100/1000. RS485.

RS485 module for 6 Temperature sensors
6-channel RTD input
3-wire RTD input with elimination of wire resistance
Resolution: 16-bit
Individual channel configuration
Disconnected sensor detection
Double Watchdog
Supply: 10 - 30vdc
Operating temperature: -25 to + 75 ° C

465.11 €
Item numberM485-ADRTD6-I
On the way in
L-CON Controller with 7 x Temperature sensor input, 2/3 wire Pt100, Pt1000, Ni120, CU100, Cu1000

Intelligent Controller with Webserver
Logical functions such as: IF-THEN-ELSE
No programming. Just pick, click and finished
Supports: I / O module, counter, timer, email
Modbus / TCP protocol to SCADA software seamless integration
IEEE 802.3af compliant Power over Ethernet ( PoE)
1 x RJ45 - 10 / 100Mbit Ethernet
7 x Temperature sensor inputs (differential)
2/3-wire Pt100, Pt1000, Ni120, CU100, Cu1000
A/I resolution: 16bit
12 samples per second (Total)
Individual sensor configuration
Power supply: PoE or 12 - 48VDC / 4.5Watt

448.23 €
Item numberL-CON7RTD
Physically in stock
Humidity meter (Hygrometer) with alarm function - DANBIT

Humidity meter

Humidity / temperature data logger
Long-term monitoring of rooms
With alarm function and interface
Numeric and graphic display

670.27 €
Item numberLOG-RH520A
On the way in
Converter from volt to 0-20mA. Isolated DC-DC in/ output modulforDC...

Isoleret DC Voltage Input/Output Modul

3- vejs (power/input/output) isolation (1000 VDC)
Udvidet drifttemperatur (-25 ~ +75°C)
Til DINskinne montering
Input og output-stik på den modsatte side

197.11 €
Item numberCNV-V-MA-I
Physically in stock
Converter 0-20mA to volt. Isolated DC Current Input/Output Modulfor...

Isoleret DC Current Input/Output Modul

3- vejs (power/input/output) isolation (1000 VDC)
Udvidet drifttemperatur (-25 ~ +75°C)
Til DINskinne montering
Input og output-stik på den modsatte side

139.76 €
Item numberCNV-MA-V-I
Physically in stock
PIR motion sensor, temperature and light-registration, the relay output, M485, MODBUS

The motion sensor light detection, temperature sensor for energy management
Connects energy management, local-lighting control via RS485 port
With powerful built-in relay for simple light activation 250VAC (1500 Watt T8 )
360 ° motion detection - up to 8 m in diameter and 4 meters height
Time delay / Sensitivity is adjustable
temperature sensor, - measuring the room temperature or fire alarm
Relay output to turn on the light via the PIR / light-strength and temperature sensors
RS485 2-wire communication bus
DCON and Modbus RTU protocols
ceiling surface mounted design
Supply voltage: 10 - 30VDC ca. 2W
Dimensions: Ø121 x 52 mm | IP20

136.01 €
Item numberM485-PIRTEMP-I
Physically in stock
Environmental monitoring station for industrial and outdoor installations. CO2, particulate matter, temperature, humidity.
Industrial/outdoor rugged environmental measurement station
 Particle sizes down from 0.3μm to 10 μm
 CO2 0-9999 ppm - electrochemical sensor
 temperature of -20 - +50°C
 Humidity of 0 - 100% RH
 Dew point measurement based on temperature and humidity
 Up to 180,000 logs with date and time stamps
 Web-based configuration interface
 Efficient software: iOS APP and Android APP (free)
 DCON, Modbus RTU/TCP and MQTT protocols
 RS-485 / Ethernet / PoE
 Relay output for local alarm or building control
 Power supply: PoE and 12 - 48VDC approx. 3.5 watts
 IP43 sealed enclosure (CO2 + temperature sensor)
 Dimensions: 211 x 130 x 70 mm
 DIN or wall mounting bracket
test
991.33 €
Item numberET-CO2MULTI-I
On the way in
Light, Temperature and Humidity sensor with MODBUS RTU/TCP, Ethernet, RS485

Indoor light meter, temperature and humidity sensor 3 in 1

For energy optimization and building automation systems

Illumination measurement range: 0 to 20,000 lux

Temperature measurement range: -20 to +60°C

Humidity measurement range: 0 to 100% RH

Supports DCON and Modbus RTU/TCP protocols

Supports MQTT protocol for Ethernet interface

With RS485/RJ45 Ethernet communication interface

Relay output - 6 Amp@250VAC

Supply voltage: PoE and 10 - 48VDC, approximately 2 Watts

Operating temperature: 0 - +75°C

Web configuration and firmware update via Ethernet

Ceiling mounting

201.00 €
Item numberET-LUXMULTI-I
On the way in
Showing 1-20 of 28 item(s)