Media Converter RJ45 to Fiber

Convert copper cable data communications to optical fiber cable data communication and display versa with a media converter.

A media converter is a simple network device that makes it possible to connect two different types of media, in this case copper network cable with fiber optic cables.

When selecting a media converter, it is very important that the converters at each end of the fiber cable are identical . It just means that they have to run at the same speed, eg. 100Mbit or 1000Mbit Gigabit media converter. They must also fit the fiber cable and the fiber plug. There are 3 standard fiber cable types. Single Mode: 9 / 125my. Multi Mode is either 62.5 / 126my or 50 / 125my.

Media converters can be with fiber connectors - ST, SC, LC mm. Almost everyone has transmitter and receiver plugs (RX / TX) and the data stream is simultaneous - called duplex. Most media converters are with insert slot for SFP module (GBIC) available in many variants, and here the choice must be considered with care. Some media converters can communicate over 1 fiber (simplex), and here the SFP module must be of the WDM type (Wavelength Division Multiplexing), which means that the transmitter (TX) is a (light) wavelength 1310nm and the receiver (RX) is on 1550nm. The WMD Media converter at the other end of the fiber cable has TX of 1550nm and RX of 1310nm. This means that the 2 data streams in this simple fiber do not interfere with each other. It also means that there can be twice as many media converters as normal. Fiber cables is available from a single fiber to fiber cables with an incredible number of single fibers.

Media converters are also available with PoE on the RJ45 connector and can power an IP camera via the network cable. Media converters are also available with 2 fiber ports and an RJ45 port. The purpose is to be able to connect a Single Mode fiber network with a Multi Mode fiber network and at the same time have an RJ45 connection to one device.

Media converters are available as un-managed - only standard function to connect RJ45 with a fiber cable.

Media converters available as managed - have the ability to customize.

Media Converter RJ45 to Fiber
There are 30 products.
10Gbit Fiber Media Converter to RJ45 10Gbit/5Gbit/2.5Gbit/1Gbit/100Mbit. Fiber 10Gbit SFP

10Gbit fiber the RJ45 Media converter
For Single Mode or Multi Mode SFP module
Extended temperature range
1 x RJ45 10G/5G/2.5G/1G/100M BASE-T
1 x 10GBASE-SR/LR SFP slot
The SFP module is standard with an LC connector
Additional SFP module
Supply voltage: 12 - 48VDC
PSU not included
Operating temperature -40 to +75°C
YOUR bracket

2,999.00 kr
Item numberETH-RJ45-SFP-WT
On the way in
fiber to ethernet WDM media converter, multi-mode, 550m, WDM-A

Gigabit WDM Single Core Fiber Media Converter
WDM-A - TX 1310nm / RX 1550nm
IEEE 802.3 / h / ab 10/100 / 1000BaseT for IEEE 802.3z 1000BaseX for Jumbo Frame (9K bytes)
Store-and-Forward Switching Mechanism
Auto-Crossover for MDI / MDIX in TP Port
Auto-Negotiation in TP Port with Flow Control
Link Alarm
Auto & amp; Force Mode Configuration
Dimensions: 71 x 94 x 26 mm for 5VDC / 1.5A power supply included

3,673.00 kr
Item numberANR-FCU-3002A-WA-AM
Physically in stock
BIDI Fiber to Ethernet WDM media converter, Multi Mode, 550m, WDM-B

Gigabit WDM media converter for single-core fiber with SC connector

WDM-B - TX 1550nm / RX 1310nm

(must communicate with WDM-A at the other end of the fiber!)

IEEE 802.3/u/ab 10/100/1000BaseT

IEEE 802.3z 1000BaseX

Jumbo Frame (9K bytes)

Store-and-Forward Switching Mechanism

Auto-Crossover for MDI/MDIX in TP Port

Auto-Negotiation in TP Port

Flow Control

Link Alarm

Auto & Force Mode Configuration

Dimensions: 71 x 94 x 26 mm

5VDC/1.5A power supply included

Optional accessory: DIN bracket

4,032.00 kr
Item numberANR-FCU-3002A-WB-M
Physically in stock
SFP Fiber media Converter to RJ45 Gigabit Media Converter

1 x 10/100/1000Mbit RJ45
1 x 1000Mbit SFP (only for Gigabit SFP modules)
up to 80km with Single Mode fiber
up to 550m with Multi Mode fiber
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
BIDI with LC or with SC (Simplex fiber)
Purchase additional Gigabit SFP modules.
up to 100m with Cat.5e or Cat.6
5% to 95% humidity
5VDC power supply included
-0°C to +70°C

601.00 kr
Item numberETH-RJ45G-SFP
On the way in
Media Converter RJ45 for fiber. RJ45 10Gbit/5Gbit/2.5Gbit/1Gbit/100Mbit. Fiber 10Gbit SFP+

Media Converter for 10Gbit Fiber
1 x RJ45 10Gbit/5Gbit/2.5Gbit/1Gbit/100Mbit Base-T
1 x 10GBase-X SFP+ Slot
For 50/125my and 62.5/125my, Single Mode or Multi Mode
SFP Module is by default for LC connectors, Duplex, Single Mode / Multi Mode.
Purchase SFP Module
Supply voltage: 5VDC
Power supply included
Operating temperature 0 to +50°C
Dimensions: 94 x 70 x 26 mm

3,299.00 kr
Item numberETH-RJ45-10GSFP+
Physically in stock
Media converter RJ45 to Gbit Multiplexing Fiber - Simplex fiber

WDN media converter for 1-core fiber, Singlemode SC.
1 x RJ45 10/100 / 1000Base-TX | 1 x 1-core (simples) single mode fiber with SC
Must be used with ETH-RJ45G-WDM SA
Up to 15 km
WDM wavelenght-division-multiplexing - only for simplex fiber cable
Must be WDM converter at both ends of the fiber

935.00 kr
Item numberETH-RJ45G-WDM-SB
Physically in stock
High-Speed RJ45 Media Converter for Single Core Fiber WDM

10/100 / 1000Base-TX to 1000Base-LX single mode, 15 km
WDM Wavelength Division Multiplexing - Simplex fiber cable only
Must be WDM converter at both ends of the fiber.

863.00 kr
Item numberETH-RJ45G-WDM-SA
On the way in
IGT-805AT, Industrial 10/100/1000BASE-T to 100/1000BASE-X SFP Media Converter -40~75°

100/1000Mbit fiber media converter RJ45
1 x RJ45 10/100/1000Mbit BASE-T
1 x SFP slot 100 / 1000Mbit BASE-X dual mode
Supports WDM SFP modules (Bi-Directional data 1 on fiber) 
WDM SFP module have wavelengths 1310nm and 1550nm
IEEE 802.3 / 802.3u / 802.3ab / 802.3z
IP30 metal housing
DIN rail and wall mounting design
Supply voltage: 12VDC to 48VDC polarity protected
AC supply voltage: 24VAC / 50Hz
PSU not included 
Operating temperature: -40°C to +75°C

982.00 kr
Item numberETH-RJ45G-SFP-T
On the way in
Managed media converter RJ45 for fiber. RJ45 Gigabit for 2.5Gbit SFP module

Top class media converts. Up to 2.6Gbit Fiber SFP
Full Managed with Many Features
RJ45 10/100/1000Mbit
Modbus TCP - Real Time Monitoring
IEEE1588v2 - Precision Time Protocol - Transparent Time
IEEE 802.1 Spank Tree Protocol
Port Mirroring - More to a
Loop Protection - Avoid Broadcast Loop
Supports Igmp Snooping
IP Sourcs Guard - Protects against Spoofing
SMTP, Sylog, Trap
with LFP and LLCF - Link Forward Carry Through.
Supply Voltage: 9 - 48VDC, 24VAC
Operating temperature: -40 - +75°C
DIN bracket
SFP module and power supply is to be purchased

1,836.00 kr
Item numberETH-RJ45G-SFP-MS
On the way in
Media converter RJ45 to Fiber, RJ45 10/100/1000Mbit, SFP module 100/1000Mbit, PoE+

Media converter for 100/1000Base-X SFP module
Can power equipment with PoE+
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
10/100/1000Base-TX
56VDC PSU included.
Mid-span PoE (PSE) (4.5/7.8)
PoE power is max. 30 Watt
Alarm in case of link failure

882.00 kr
Item numberETH-RJ45G-SFP-P
On the way in
1 port Media Converter with 1 x SFP slot 100 / 1000Mbit and 1 x Gbit RJ45 port,

100 / 1000Mbit Media Converter with extended temperature
1 x RJ45 10/100 / 1000BASE-T
1 x SFP slot 100 / 1000Mbit
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
Supply voltage: 9 - 48VDC redundant power
Can also be connected to 24VAC
consumption: 2Watt
Power not supplied
Dimensions: 104 x 70 x 30 mm
IP30 metal housing
DIN rail and wall mounting
Weight: 251G
operating temperature -40 to +75°C

919.00 kr
Item numberETH-RJ45G-SFP-MG
Physically in stock
Media converter RJ45 to 2 x fiber

1 x 10/100 / 1000BASE-T RJ45 IEEE 802.3bt PoE ++ output
2 x SFP slot 1000BASE-X and 100BASE-FX TC-dual mode
PoE Power up to 95 watts to PoE port
Provides 54VDC of the RJ45 Ethernet cable for devices with Ethernet PoE port
Automatic detection of IEEE 802.3bt-equipment United Protects devices from being damaged by incorrect installation
Remove Power supply up to 100 meters
IEEE 802.3af / at / bt splitter devices compatible
Layer 2 features
DIP switch: Selecting the standard / Legacy mode
IP30 metal housing
DIN rail and wall mounting
12 - 56V DC redundant power with reverse polarity protection
power supply not included
Operating Temperature -40 to 75 ° C,

2,827.00 kr
Item numberETH-RJ45G-SFP2P+
On the way in
Media converter with 2 x SFP 1000Mbit slot for Single Mode or Multi Mode and 1 x RJ45

Replaced by ETH-RJ45G-SFP2

1000Mbit Media converter can connect 2 different fiber networks and RJ45
Is suitable as a node in Gigabit fiber networks with 1 x RJ45
1 x RJ45 10/100/1000Mbit
2 x 1000Mbit SFP slot for SFP modules Single Mode and/or Multi Mode
Can also connect Single Mode networks with Multi Mode networks
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase additional Gigabit SFP modules.
5VDC power supply included

1,309.00 kr
Item numberETH-RJ45G-SFP2P
On the way in
Media converter with 2 fiber ports and RJ45 port. Can e.g. "connect" single mode with multi mode fiber

Multi-function media converter - has it all!!
Connect 2 fiber networks with different speeds, e.g. 100Mbit with 1000Mbit
Connect 2 fiber networks which are Multi Mode and Single Mode
Media converter with 2 x fiber ports - redundant mode
Media converter with 2 x fiber ports - switch mode
Fiber into port 1 and Fiber on from Port 2 with 1 x RJ45
SFP slot for 100Mbit, 1Gbit, 2.5Gbit SFP transceivers
The SFP module is standard for LC connectors, duplex, Single Mode / Multi Mode.
Additional SFP modules.
12 - 48VDC redundant and 24VAC
Power consumption: 4.8 Watt
Power supply not included
Dimensions: 135 x 87 x 32 mm
Weight: 505g
IP30
Operating temperature -40 to +75°C
DIN rail and wall mounting

1,667.00 kr
Item numberETH-RJ45G-SFP2
Physically in stock
Managed media converter with 2 x RJ45 to 2 x fiber. RJ45 Gigabit for fiber up to 2500Mbit SFP

Top class media converter with 2 fiber ports and 2 RJ45 ports
for redundant network or as Node in networks
suitable where Single Mode must be connected to Multi Mode
full managed with many features
RJ45 10/100/1000Mbit
Modbus TCP - Real Time Monitoring
IEEE1588V2 - Precision Time Protocol - Transparent Time
IEEE 802.1 Spanking Tree Protocol
Port Mirroring - more to one
Loop Protection - Avoid Broadcast Loop
Supports IGMP Snooping
IP Source Guard - Protects against Spoofing
SMTP, Sylog, Trap
with LFP and LLCF - Link Forward Carry Through.
Supply voltage: 9 - 48VDC, 24VAC
Operating temperature: -40 - + 75 ° C
DIN bracket
SFP modules and power supply are to be purchased

2,031.00 kr
Item numberETH-RJ45G-2SFP-MS
Physically in stock
Media converter RJ45 to fiber, RJ45 10/100/1000Mbit, Fiber 1000Mbit Multi Mode

Media converter 1000Mbit Multi Mode SC duplex, 550 meters

10/100/1000Base-TX to 1000Base-SX, 850nm

Multimode fiber cable (50/125 µm or 62.5/125 µm)

Operating temperature 0 to 50°C

DC 5V/2A

683.00 kr
Item numberETH-RJ45G-SC-M
Physically in stock
Waterproof media converter for 1000Mbit Fiber and 100/1000Mbit RJ45, PoE+ IP67 IK10

IP67 sealed media converter, ideal for Camcorder, AP etc.
1 port 1000Mbit fiber SFP slot
SFP slot for Single Mode or Multi Mode optical transceiver
1 port 100/100/1000Mbit RJ45
Autodetection of PD equipment (devices that must be powered by PoE)
PoE+ out: 30Watt
End-span: + on 1/2, - on 3/6
IK10 rated for vandal protection
6kV ESD protection
Supply voltage: 24 - 56VDC (Terminal block)
Temperature range: -40 - +75°C
Plug and Play
Dimensions: 170 x 44 x 73 mm
Wall mounting

1,507.00 kr
Item numberETH-RJ45G-P-IP67
On the way in
Media Converter with 2 x SFP 100/1000Mbit and 2 x 10/100/1000Mbit RJ45, PoE++

2 x 10/100 / 1000BASE-T RJ45 IEEE 802.3bt PoE ++ output
2 x SFP slot 1000BASE-X and 100BASE-FX TC-dual mode
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
PoE++ power up to 95 watts of PoE
Provides 54VDC of the RJ45 Ethernet cable for devices with Ethernet PoE port
Automatic detection of IEEE 802.3bt equipment - does not protect PoE equipment at damage
IEEE 802.3af / at / bt splitter devices compatible
DIP switch: Selecting the standard / Legacy mode
DIN rail and wall mounting
12 - 56V DC redundant power with reverse polarity protection Power supply
purchased
Dimensions: 153 x 85 x 55 mm
Operating temperature -40 to +75°C

3,056.00 kr
Item numberETH-RJ45G-2S2LP
On the way in
Media converter from RJ45 to optical fiber, with PoE 95Watt

1 x 10/100 / 1000Mbit RJ45
1 x 100 / 1000Mbit SFP
SFP module is as standard for LC connectors, duplex, Single Mode / Multi Mode.
Purchase 100Mbit / Gigabit SFP modules.
POE (PSE) up to 95W
48-56 VDC
IP30 rated
-40 ° C to + 75 ° C
5% to 95% humidity
DIN bracket

2,325.00 kr
Item numberETH-RJ45G-SFP-95W
On the way in
Showing 1-20 of 30 item(s)