Test Equipment / Programmer / Logic

DANBIT has a large selection of test equipment and in this category exists;

Fiber tests, cable tests, camera tests, network tests, PoE tests, RS232 tests, screen tester, microscopes, power meter, multimeter, signal strength meter, range finder, thermal camera, universal applications, IC programs, logic analysis and analysis software.

Test Equipment / Programmer / Logic
There are 17 products.
Service monitor for Analog surveillance camera

Portable Service monitor
AHD / TVI / CVI / CVBS coax in and out, HDMI in, VGA in. PAL / NTSC
12VDC 1A output for camera
800 x 480 (5: 3) 5 "TFT color screen.
Supports Pan-Tilt-Zoom Pelco-D / P PTZ via RS485
Supply: 5VDC via Micro USB-B connector.
5200 mAh battery, up to 11 hours battery life
Suitable for camera installers
Some IP cameras have CCTV output (BNC)
Cannot be used for IP cameras without BNC

194.30 €
Item numberMON5-S
On the way in
Cable Finder - RJ45 and RJ11

Scan: Sends a tone over the cable that can be intercepted. Make it easy to find the right cable, among other cables.
Review Test: Sends a signal through each manager and shows where the signal comes out at the other end of the cable.
Battery: 2 x 9V (not included)

41.94 €
Item numberTEST-RJ45-S
Physically in stock
Digital pH meter with LCD display (0-14 pH) - DANBIT

Measurement range: 0.00-14.00pH
Resolution / accuracy: 0.01pH
Calibration: Automatic 3-point calibration 6.8 & 4.00 & 9.18pH
Temperature: 0-60 ° C
Humidity: 100%

28.94 €
Item numberINST-PH
Physically in stock
Cable tester for fiber cables with LC connector. Tester fiber breakage and review

The fiber cable tester for LC / MU connectors.
This type of fiber has a tip diameter of 1.25 mm
Test residue tip suitable for fiber cables with a tip diameter of 1.25mm
Transmitter visible light through the fiber
Tester fiber cable with LC connectors at both ends
Tester Pigtail fiber with LC in one end
Cable will light up when there is a rupture or crack.
in a healthy cable the light is seen only in the opposite end of the fiber cable.

185.32 €
Item numberTEST-FIBER-LC
On the way in
Fiber Cable Tester - Test your fiber cable for breakage and breakthrough

Fiber cable tester for SC / FC / ST / E2000 plug types
The tip of these fiber cables a 2.5mm
The tester's tip fits fiber ends with a diameter of 2.5mm
Sending visible light through the fibers.
In case of fracture, the fiber cable will light up on the spot.
By healthy cable, light is visible at the opposite end of the fiber

181.17 €
Item numberTEST-FIBER-UNI
On the way in
Power meter to the USB port - Test current mobile phone or PC

Very useful tool for servicetekinikeren

Target for consumption on the USB port is borderline.
Portable USB voltmeter with LCD display
3-7V / 50-3500mA / 0-19999mAh < br> Voltage Tester and leave
USB2.0 interface

17.96 €
Item numberTEST-USB-V
Physically in stock
Fiber tester for measuring light loss in a fiber cable

Fiber Tester. Measures how much loss there is in a fiber cable at the selected wavelength
3 x SFP ports (2 x Light Source, 1 x Power Meter)

SFP modules included:
650mm FP SC SFP
850mm VCSEL SC SFP
1310mm FP SC SFPT
1550mm FP SC SFP
FiTs Meter Module SC 850/1310/1490 / 1550mm
Purchase remote module TEST-FIBER-PM for measuring on mounted fiber cables

1,600.09 €
Item numberTEST-FIBER-PM-LS
Physically in stock
ESD mat - For electronics work - DANBIT A / S

ESD jordingsudstyr.

ESD måtte til elektronikarbejde.
500 x 700 x 2mm ESD sikret måtte.

Anbefales at bruge ved PC samling og reparation.

61.64 €
Item numberESD-MAT
On the way in
Compact digital multimeter, AC / DC

Simple and compact digital multimeter with LCD display
DCV measuring range: 300V, 200V, 20V, 2V 200mV
ACV measuring range: 300V, 200V
DCA measuring range: 200mA, 20mA, 2mA, 200uA
Resistance measuring range: 2MΩ, 200KΩ, 20KΩ, 2KΩ, 200Ω
Diode / Continuity measurement
Battery: 9V (included, not installed)

38.19 €
Item numberINST-MULTI
Physically in stock
Multimeter, pen type with LCD display for measuring current

Simple and compact digital pen type multimeter with LCD display
DCV measuring range: 600V, 200V, 20V, 2V 200mV
ACV measuring range: 600V, 200V, 20V, 2V
DCA measuring range: 200mA, 20mA
ACA measuring range: 200mA, 20mA
Resistance measuring range: 20MΩ, 2MΩ, 200KΩ, 20KΩ, 2KΩ, 200Ω
Diode / Connection measurement
Built-in LED lamp
Battery: 2x1.5V AAA (not included)
Dimensions: 225 x 38 x 26 mm

73.97 €
Item numberINST-MULTI-PEN
Physically in stock
Fiber Cable Tester for SC Connectors | Up to 300m Length

Cable tester for fiber SC and RJ45

RJ45, RJ11 & SC cable tester

Up to 300m cable length RJ45

244.01 €
Item numberTEST-FIBER-SC
Physically in stock
Showing 1-17 of 17 item(s)