Mifare RFID 13,56MHz

Mifare 13.56 MHz RFID technology and main variants

The Mifare standard for RFID was originally defined by Philips in 1994 for use in non-contact electronic ticketing and was later described in the ISO / IEC 14443A standard for 13 , 56 MHz non-contact smart cards. Therefore, there is no emphasis on large reading distance, which is typically up to 8 cm using common tags and readers. Mifare is used eg. in the travel card in Denmark. Mifare tags, like tags for the EM standard for 125 KHz, have a unique ID (UID) - but also have built-in memory that is stored in "sectors" in the tag.

Mifare technology available in several variants. Mifare Classic is provided with 1k or 4k memory organized in sectors. Mifare UltraLight has 512 bytes of memory in sectors - but otherwise works as Mifare Classic. MIfare PRO Works as a "smart card" with CPU and the ability to insert an operating system into the tag, so it's probably the most flexible of the Mifare technologies. In addition, there is a dedicated processor built-in for DES encryption to allow data to be secured against unwanted access.

Mifare DESFire supports AES encryption as well as DES and 3DES encryption when accessing sector data in the tag. Therefore, data with very high security can be protected against unwanted reading and copying. Works as a "smart card" with cpu and operating system built into a PROM area in the tag optimized for fast reading of data. Can use UID of up to 64 bits.

Mifare RFID 13,56MHz
There are 28 products.
RFID Reads Mifare - Ultralight and MF1 Standard Card (Wiegand and RS232) with serial connection / RS232

Reading distance: Up to 5 cm
Frequency: 13.56 MHz
Read Mifare Ultralight and Mifare F1 Standard Tag
Mifare 1024/4096 byte, Ultralight 512bit, ISO 14443A
3 in 1 interface : Wiegand, MSR ABA TK2 and RS232
LED and Buzzer
Quick Data Transfer
Weatherproof, ABS
Cable Length: 90 cm
Cable is not terminated with DB9
Easy to install
Supply: 5 - 18VDC (Liniary PSU)
Dim: 83 x 47 x 16 mm

128.24 €
Item numberRFID-MR
Physically in stock
RFID Duplicator, 125kHz / Mifare / NFC reads / writes with USB interface. Can clone uid.

RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)

105.32 €
Item numberRFID-KOPI-USB
Physically in stock
UHF RFID, NFC, Mifare, 1D/2D Barcode reader. Barcode scanner. Wifi, Bluetooth, 4G LTE, GPS

Top-class scanner for item and product registration
Professional Multi Reader and Writer for RFID and Barcode 1D/2D/QR etc.
Powerful circular polarized antenna
UHF RFID read and write up to 25 meters, depending on TAG
UHF TAGs are passive - without a battery
Reads NFC and Mifare TAGs
Reads up to 900 TAGs per second
Barcode reader CCD: 1D, 2D, QR codes
Access to the APP Center with programs and tools
13MP camera with flash
5.2" Display - 1920 x 1080p with touch
Communication: dual band Wifi, Bluetooth, 4G LTE
Dual SIM or Single SIM and Micro CD card
GPS/AGPS, GLONASS
Battery: 8000mAh Li-ion (approx. 12 hours of operating time)
IP65 tight. 1.5 meter drop tested
Operating temperature: -20 - +50°C

Call +45 56 66 20 20 for price
Item numberBARHAND-UNI-RFID
On the way in
RFID reader 13.56MHz Mifare 10 digits HID

Keyboard emulation: 10 digits, 40bit HEX

Frequency: 13.56MHz Mifare DesFire and Ultra Light

Versions: Mifare S50, S70

Power supply: 5VDC from USB port

Operating temperature: -10 - +75°C

Reading distance: 5 ~ 15 cm

Cable length: loose USB cable

Dimension: 118 (L) x 75 (W) x 17 (H) mm

Weight: 250g ± 10%

Desktop - table model

Color: white or black

128.91 €
Item numberRFID-M5USB-HS10
On the way in
RFID reader 13,56MHz Mifare, Waterproof - DECIMAL 8 digits, 32bit, HID - keybord emulation

Keyboard emulation: 8 digits, 32bit ASCII, Decimal
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A/B
Power supply: 5VDC from USB port
Operating temperature: -10 - +75°C
Reading distance: 5 ~ 15 cm
Cable: Mount the USB cable on the back
Dimension: 118 (L) x 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof IP67, wall mounting

128.91 €
Item numberRFID-M51USB-D8
Physically in stock
Waterproof RFID reader 13.56MHz Mifare HEX 10 digits 40bit

Keyboard emulation: 10 digits, 40bit Hexadecimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable on the far side
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67

122.74 €
Item number-RFID-M51USB-H10
On the way in
Waterproof Dual Band RFID reads 125kHz, 13.56MHz, NFC, EM400X, MIFARE. 10 characters decimal ascii. HID

Dual band RFID card reader for USB - Decimal
10 characters decimal (ASCII) - 40bit
125 kHz, 13.56 MHz, NFC
125khz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - Keyboard Emulation
Reading distance: Up to 10 cm
Align via USB
USB interface
Dip-SW to ID format setting - see Table 
Environment: IP67 Waterproof, outdoor mounting
operating temp. -25 ° to + 70 ° C
target: 88 x 56 x 18 mm

Call +45 56 66 20 20 for price
Item numberRFID-D51USB-D10
On the way in
Dual Band RFID reader 125kHz, 13.56MHz, NFC, EM400x, Mifare and Desfire

Dual Band RFID card reader for USB - Decimal/HEX
8-10 characters Decimal/HEX - 32/40bit
125 kHz, 13.56 MHz, NFC
125kHz: EM4001, EM4002, EM4200
Mifare: ISO 1443A/B/15693
HID - keyboard emulation
Reading distance: up to 10 cm
Supplied via USB
USB interface
ID format setting with DIP switches - see diagram
Hard copy form with the product
operating temp. -25° to +70°C
Dimensions: 88 x 56 x 18 mm

139.36 €
Item numberRFID-D5USB-D10
Physically in stock
Mifare RFID reader with USB HID. Desktop with card slot. Can be programmed

Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase

141.10 €
Item numberRFID-MR-G
Physically in stock
RFID reader - write - USB - Mifare - 13,56MHz, HID - comport

Frequency: 13.56 MHz
Can easily be programmed for other formats
programmable HID or COM port
Can program sectors in TAG
RF Protocol: ISO14443A, MIFARE
Built-in antenna
supply: USB 5V / 200mA
Operating temp. -20 to + 70 ° C
Play
Plug Dimensions: 105 x 72 x 16 mm |

257.55 €
Item numberRFID-USB-MIFARE
Physically in stock
RFID, tag, PVC, PET,

Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees

5.63 €
Item numberRFID-865-12-TAG
Physically in stock
RFID MIFARE reader for TCP / IP network - 13.56MHz

Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA

196.44 €
Item numberRFID-MR-ETH
On the way in
RFID reader 13.56MHz, Mifare, DesFire, Ultralight and 125kHz EM40XX. For wall, RS232 and Wiegand

RFID Dual band EM40XX / Mifare reader

13.56MHz, Mifare, Felica, Desfire, Ultralight, Felica

125kHz

Reading distance up to 3 cm

RS232 or Wiegand 26 interface

For wall mounting

LED and Buzzer

Supply voltage: 5 - 18VDC

Cable out from the back

Dimensions: 78 x 43 x 15 mm

194.30 €
Item numberRFID-MR-MULTI
Physically in stock
RFID Reader Mifare Multiiso 13.56MHz, ISO14443A/B / ISO18092 NFC, RS232

Multi 13.56 MHz Mifare Reader
RS232 Connection
5VDC (Power Jack 5.5 / 5.1mm) Not included
Cabinet: ABS, indoor IP65
Dim: 88 x 56 x 18 mm

319.46 €
Item numberRFID-MR-RS232
Physically in stock
Numbered RFID TAG Mifare and Mifare Classic ISO14443A, 1 KB 16 Sectors Memory

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte Free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Can't change
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Numbered - printet on the card
target: 85.7 x 54 x 0.8 mm

6.16 €
Item numberRFID-MTAG-KORT-N
On the way in
RFID TAG Mifare and Mifare Classic ISO14443A, 1 KB 16 Sectors Memory. 13.56MHz.

Mifare Classic1K TAG
designed as key ring
Bag with 20 pieces.
reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 Blocks / 16 byte
UID code is factory programmed - cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
Dim: 40 x 32 x 4 mm

63.92 €
Item numberRFID-MTAG-WD1K
On the way in
RFID TAG Mifare and Mifare Classic ISO14443A, 1 kB 16 Sectors Memory

Mifare Classic 1K RFID Tag
Reading distance: 0 - 10 cm
ISO14443A
1 Kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed - Cannot be changed
Frequency: 13.56MHz
Material: ABS, IP68
credit card format
Dim: 85.7 x 54 x 0.8 mm

7.77 €
Item numberRFID-MTAG-KORT1K
Physically in stock
Dual Band RFID TAG Card 2.45GHz & 13.56MHz - Programmable

Dual band RFID TAG card
2.45GHz and 13.56MHz Mifare read/write
Programmable parameter
Dimensions: 86W x 54H x 6D (mm)
Weight: 25.8g
Combine active and passive RFID
Long operating time on battery
Wireless TAG programming
Supplied without battery (2 x 2032)

122.88 €
Item numberRFID245TAG2C-BM0
Physically in stock
IP68 RFID reader, 125kHz / 13.56MHz, Wiegand 26/34, only for access control with Wiegand

Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm

237.98 €
Item numberRFID-MR-IP68
Physically in stock
RFID-læser til desktopforUSB

Keyboard Emulation: 8 digits, 32bit HEX
Frequency: 13,56MHz Mifare Ultra Light
versions: Mifare S50, S70, ISO15693, ISO14443A / B
UID in positive Normal sequence
Power supply: 5VDC from USB port
Operating temperature: -10 - + 75 ° C
Reading distance: 5 ~ 15 cm
Cable length: Solved USB cable
Dimension: 118 (L) x 75 (W) x 17 ( H) mm
Weight: 250g ± 10%
desktop - table model

122.88 €
Item numberRFID-M5USB-I
On the way in
Showing 1-20 of 28 item(s)