PoE PSU / PoE Injector / PoE splitter

PoE PSU / PoE Injector / PoE splitter

PoE - Power over Ethernet

PoE supply voltage for clients via network cables as separate power supplies for example. surveillance cameras and serielportservere is unnecessary. PoE equipment is designed to receive the supply voltage via network cables. Often PoE also be supplied from an independent power supply. Cable lengths can restrict the use of PoE. A new standard called PoE Plus (IEEE 802.3at) can deliver more power than the current PoE standard (IEEE 802.3af). Further information about PoE is available at https://danbit.dk/da/content/41-hvad-er-poe-

General info about midspan and endspan

PoE standard IEEE 802.3af allows the use of two types of power supply units: endspan and midspan. < p> A endspan unit (PoE switch) typically supplies power via the data leading wires of the network cables (pins 3 and 6, 1 and 2) and is available for 10 / 100Mbit and 10/100 / Ethernet 1000Mbit sources. A endspan unit is a combined midspan injector and switch. It is installed in place of an ordinary switch, if the connected network devices to be powered over the network

A midspan injector (hub) installed between a non PoE switch and the power consuming device. It is restricted to supply power through the unused pin pair (4, 5, 7 and 8) in a 10 / 100Mbit network.

POE standard

PoE PSU / PoE Injector / PoE splitter
There are 36 products.
Network repeater for LAN cable

10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm

PoE In: Max 30.8 Watts

PoE Out: Max 26 Watts
Weight: 189g

800.00 kr
Item numberETH-POE-BOOST-1G+
Physically in stock
DC POE injector 12v, 19v, 24vdc over ethernet cable

Passive PoE Injector with 12 / 19 / 24 VDC 0.7A output
From Active to Passive PoE converter
PoE input port: IEEE 802.3af/at RJ-45 STP / PD. Supplied from an active PoE switch
Passive PoE output port: non-802.3af/at RJ-45 STP / PSE. For equipment that is NOT for active PoE.

623.00 kr
Item numberETH-POE50PAS
Physically in stock
PoE Extender. 1 x PoE++ ind og 2 x PoE+ ud. Split PoE ud til 2 PoE PD enheder, 30 Watt hver

Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland

1,956.00 kr
Item numberETH-POE-BOOST-2G-U
Physically in stock
Outdoor cabinet for PoE cameras, AP and other PoE devices

Compact design
Output 54VDC vlotage for PoE device use
Space for PoE switch / PoE Surge protector installation
IP66 rated
Include Thermal Switch control heater and blower
Include fiber panel for fiber cable connection
Battery protection for deep discharge and short circuit
Space for 12V/7Ah Battery x 4PCS

Call +45 56 66 20 20 for price
Item numberKAB-POE-U
On the way in
2 x PoE+ injektor 2 x PoE+ PSE og 2 x LAN. Gigabit. Mid-span injektor

2 Ports Poe Injector provides 2 x 36Watt for PD equipment
10/100/1000 Mbit
pin 4/5 (+), pin 7/8 (-)
4 x RJ45 (2 with data and 2 with data + PoE for equipment)
supply voltage: 12 - 56VDC
Power Budget is 60 - 72 Watt
Dim: 105 x 70 x 30 watts
Weight: 280g
Operating temperature: -40 - + 75 ° C
DIN mounting

1,115.00 kr
Item numberETH-POE2+12-56
Physically in stock
2 ports PoE extender

Gigabit PoE and Data Extender / splitter
1 x RJ45 data + PoE + input
2 x RJ45 data + PoE + outputs
Standard: IEEE 802.3af and 802.3at
From Injector to Extender up to 100 meters
From Extender out to PD devices up to 100 meters
Wall mounting
Plug & Play
Temperature range: 0- + 50 ° C
Dimensions: 140 x 77 x 28 mm
Weight: 234g

1,019.00 kr
Item numberETH-POE-BOOST-2G
Physically in stock
Gigabit PoE Splitter with 5V/3A, 9V/2.5A, 12V/2A, 18V/1.4A, Suitable for non-PoE equipment.

PoE splitter with voltage selector for 5, 9.12.18 Volts

Up to max. 25W

IEEE 602.3af/at(POE) IEEE 802.3 (Ethernet)

IEEE 802.3U, IEEE 802.3ab (Gigabit Ethernet)

1 x 10/100/1000 Mbit RJ45 PoE port (data + power input)

1 x 10/100/1000 Mbit RJ45 LAN port (data only)

1 x DC connector 5.5 / 2.1 mm - Output voltage (DC out)

Cat. 5E, 6 UTP

DC voltage from PoE switch or Injector 36 to 57 VDC

2 x RJ45 Note PoE does not return to RJ45 output - only data!

ROHS, CE, FCC (FCC Part15, Class B)

347.00 kr
Item numberETH-POE5-18V
On the way in
PoE Switch CAT. 5/6/7/8 60W for every PoE-port

4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE 
Power supply: 100 - 240VAC 
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg

1,924.00 kr
Item numberETH-POE-DIP-4X1G
On the way in
Waterproof PoE extender - Up to 22Watt PoE power. 4 pieces in extension - 500 meters. IP66 tight.

For harsh industrial and outdoor environments.
Voltage over Ethernet - PoE - no external voltage source
Extend a PoE voltage and data signal up to 100m
PoE output power: up to 22Watt
Over a single CAT 6 cable (STP cables are recommended).
Cascade: Maximum 4 ETH-BOOST-POE-1G-U units in extension
Extends the distance up to 500m
IP66

1,392.00 kr
Item numberETH-POE-BOOST-1G-U
Physically in stock
Passive PoE injector, +4 and 5, -7 and 8. Volt up to 48VDC, 1A. POC.

Passive PoE / POC injector for all voltages
Max. Power is 1amp
Voltage up to 48VDC
for UTP and STP Patch Cables
PoE Out: + on Pin 4, 5. - On Pin 7, 8
100Mbit Pin 1, 2, 3, 6
Plastic cabinet
Dim: 75 x 28 x 22 mm

189.00 kr
Item numberETH-POE-POC
Physically in stock
4 Port PoE Injector ++, 95 Watt, 4 x LAN in, 4 x LAN out with PoE++

Connect switches without PoE for PoE PSE to Equipment
IEEE 802.3bt back compatible to IEEE 802.3at
Supports 10/100 / 1000Mbit speeds
4 x LAN input from the switch without PoE
4 x LAN with up to 95 Watt PoE
Max. PoE power total is 240Watt (PoE power budget)
Auto-detect devices with PoE input for not destroying not PoE
Supply voltage: 48 - 54VDC max. 244 Watt
Setting with DIP switches
DIN bracket for wall mounting and
Operating temperature: -40 - +75°C
Dimensions: 135 x 88 x 50 mm
Weight: 537g

2,336.00 kr
Item numberETH-POE4GH+
Physically in stock
PoE+ Injector Powered by External 12 - 48V Supply

POE power supply via Ethernet cable, up to 30 watt
LAN without PoE in, gives LAN with PoE out
Poe +, 56VDC / 30W
10/100/1000Mbit network.
Power supplies from 12 -48VDC / 32W Max
Redundant Power Input via Terminal Block
Power supply not included
Dim: 135 x 87 x 32 mm
Operating temperature: -40 ~ +75°C

980.00 kr
Item numberETH-POE56-DC12-48
Physically in stock
IP67 PoE Injector, 30 Watt Poe + Gigabit, End-Spam, Supply voltage 24 - 56VDC

Waterproof Outdoor PoE+ Injector 30Watt
1 x RJ45 Data
1 x RJ45 Data and PoE+
1 x 2-pin DC Phoenix connectors
IK10 Vandal safe
Supply voltage: 24 - 56VDC
POE Standard: IEEE 802.3 at / af
End-Span
Pin: (+ 1.2) (- 3.6)
Operating temperature: -40 - +75°C
wall mounting
Size: 170 x 73 x 44 mm
Weight: 340g

1,226.00 kr
Item numberETH-POE30-WP
Physically in stock
12VDC Passive PoE Injector with RJ45, POC

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 12VDC 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

200.00 kr
Item numberETH-POE-POC12
Physically in stock
24V Passive PoE injector with RJ45, POC

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 24V 1A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm (LxWxH )
Weight: 104g

200.00 kr
Item numberETH-POE-POC24
Physically in stock
48VDC Passive PoE Injector with RJ45, POC

Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 48V 0.5A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm ( LxWxH)
Weight: 104g

305.00 kr
Item numberETH-POE-POC48
Physically in stock
Showing 1-20 of 36 item(s)