Serial Port Servers

Equipment with a serial port is usually connected directly to the computer when the distance is less than 15 meters.

With a serial port server (Serial Device Server), the equipment can be connected anywhere on a network so that all network users can use them. This applies to both local and internet. When connected over the Internet, the reach becomes global.

Serial Device Servers

It has the task of making a serial port available on a network. It is a compact computer that has an Ethernet network interface and one or more serial ports. Its firmware is only for sending data from the network to the proper serial port and transmitting data received on serial ports to the network. The protocol is TCP / IP (Internet Protocol), so even a serial port server with many ports has only one IP address and each serial port has its own port number.

Three communication methods

In principle, it can be communicated with serial port servers in 3 different ways:

  • The "Winsock" method
  • "Virtual com driver" method
  • "Box to box" method

Used if there is no computer with network function available. The two serial port servers are configured to send data to the counterpart. They are defined as "Master" and "Slave", each with its own IP address and the counterparty's IP address. In principle, it is a fixed connection between the serial ports and it is important that the connection be independent of operating systems and software versions otherwise used on the network.

The "Box to box" method is also the only usable solution in cases where the system cannot include software that uses "sockets" or COM port drivers, for example. a PLC and a simple measuring port with serial port.

In all common programming languages ​​for Windows (Visual C ++, Visual basic, Delphi and others), TCP / IP is accessed via "Winsock", releasing the programmer to kno

The "Winsock" method

This method assumes that the applications using the serial port server have access to the network via the TCP / IP protocol using the networking features built into Windows. It is the standardized interface for these features called "Winsock".

In all common programming languages ​​for Windows (Visual C ++, Visual basic, Delphi and others), TCP / IP is accessed via "Winsock", releasing the programmer to know all the details of the underlying network protocols.

Once the protocol, IP address, port number and client / server status are selected, free-form data blocks can be exchanged between the program and the serial port server.

Many types and variants

There are a variety of variants among serial port servers. The number of serial ports per. unit varies from 1 to 16, and the serial ports can be traditional RS232 ports with "point to point" connection up to approx. 15 m or RS422 ports with balanced "point to point" signals up to approx. 1200 m and RS485 ports, for "multidrop" connection, where up to 32 serial ports can share the same 2- or 4-wire bus. Here, the range will also be up to 1200 m.

Most serial port servers use the wired Ethernet network interface, others use wireless networks (Wifi) or fiber optic cable, where the network connection is via fiber optic cable.

Serial Port Servers
There are 40 products.
8 Ports serial port server, RS485 / RS422, Moxa Nport NP5630-8 Serial Device Server

8 pcs. External COM ports via Ethernet and Internet

Virtual-Com Port, Pair-Mode - Back to Back
Socket Modes: TCP Server / TCP Client / UDP
easy to configure
cables Not included (RJ45 for DB9)
Supports Win10 and earlier us, Linux

629.80 €
Item numberETH8SER485
Physically in stock
4 Ports RS232 Extender Booster Over Fiber cable, 4 x DB9 Han connector Volktek IRF-755

4 COM ports via optical fiber cable
point to point or pount to 4 points
4 x RS232 ports up to 2km with multi mode cable
4 x RS232 ports up to 20km with single mode cable
Buy 100Mbit SFP Module (Multi Mode or Single Mode)
1 x 100 Mbit SFP for LC Duplex Fiber cable
4 x RS232 DB9 male connector
Setup via built-in Web server
62 x 50 x 120 mm
DIN fittings
Display 3 LEDs Displays TX / RX, Network and System Status
Supply voltage: 9 - 32VDC Redundant (not supplied)

335.00 €
Item numberBOOST-4RS232-FIBER
Physically in stock
1 Port serial port server RS232 / 422/485, MOXA DE-211, RS232 / 422/485 over Ethernet DB25

External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal

190.68 €
Item numberETH1SER+
Physically in stock
Serielportserver, 2 porte, 10Mb LAN, 100Mb LAN, RS-232, DC strøm, M...

External COM ports via Ethernet and Internet
Compact and but finding room for
Socket Modes: TCP Server / TCP Client / UDP
Windows Utility for Configuring Multiple Device Servers
Supports 10 / 100m Ethernet
2 x DB9 male
SNMP MIB-II for Network Management
Power supply included

309.81 €
Item numberETH2SER232+DB9
Physically in stock
Moxa Nport 6250. Serial port over network

External COM ports via Ethernet and Internet

2 ports secure terminal server, MOXA NPort 6250
1 X RJ45 and 2 X RS232 / 422/485 (DB9) connectors
10 / 100 Mbps, auto MDI / MDIX
Operation Temp.  0 - 55 °
Supplied via 12-48 VDC

415.13 €
Item number-NP6250
On the way in
Serial port server is COM port via Internet and Ethernet. Atop SE5201-DB

External COM port over Ethernet and Internet
RS232/422/485
Baud rate: 1200 - 230.4kbps (2-wire)
Max. baud rate at 4-wire RS485 up to 921.6kbps
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)

204.35 €
Item numberETH1SER-MINI+
Physically in stock
MOXA NPORT 5650-16 16 Ports RS232/422/485 Serial Device Server

16 ports RS232/422/485  Serial Device Server
10/100Mbit
MOXA NPort 5650-16
19" Rack mount
Seriel Port Server

1,677.81 €
Item numberETH16UNI-P
On the way in
Industrial Serial RS232 adapter for WiFi network. Connect RS232 equipment to a wireless network

DB9 female connector
1200 to 921600 baud
Supply 5 to 24 volts via USB or screw terminals
Built-in WiFi antenna
USB adapter cable included

107.74 €
Item numberCNV-RS232-WIFI+
On the way in
MOXA N-Port NP-5610- 8. Serial Device Server

External COM ports via Ethernet and Internet

8 x RS232
RJ45
10/100Mbit Baset Device Server
15kv ESD
for RackMontage
100-240 VAC Power Input
OS Support: 95/98 / Me / NT / 2000/2003
Real Com / Tty Drivers, Linux Real Tty Driver
Operating temperature: 0-55 ° C

Call +45 56 66 20 20 for price
Item numberETH8SER-P+
On the way in
1-PORT RS422/485 serielportserver

1-port RS422 / 485 serial device server, MOXA NPort 5130A
Only 1 W power consumption
3-step web-based configuration
Surge protection for serial, Ethernet and power lines
COM port grouping and UDP multicast applications
Screw connections for secure mounting
Real COM / TTY drivers for Windows and Linux
standard TCP/IP interface and versatile TCP and UDP operating modes
connect up to 8 TCP hosts
12Vdc power supply included

Supports several different RS422 formats, such as 7N1, 8N1, etc.

265.99 €
Item numberETH1SER5130A
On the way in
RS232 / RS485 / RS422 serial port server 4-port Ethernet 2 x SFP Industrial EMC protected. DIN

Monitor, manage and manage industrial devices
2 x SFP slot for fiber transceiver (SM or MM)
Industrial EMC protection, temperature operation wide, -40 ° C ~ 85 ° C
fast- Ethernet 2 x 100/1000 SFP slots with RSTP Redundans
4 software Select RS232 / RS485 / RS422 serial ports, up to 921Kbps
TCP Server / Client, UDP, Virtual com and tunneling modes are supported
Embedded security with PPTP, IPSec or OpenVPN Client / Server
Redundant 12 ~ 48 VDC Power entries
Configuration via Web Browser / Serial Console / Telnet / Windows Utility
Robust metal cabinet with wall or DIN rail mounting

765.81 €
Item numberETH4SER-A
On the way in
Moxa Nport 5230A-T is a 2 port serial port server RS422 / 485 optoisolated.

External COM ports via Ethernet and Internet

Serial Device Server with RS422 or RS485 via Ethernet and Internet.
RS422 / 485 seriesport via screw terminal
Dual DC Power input with Power Jack and Terminal block
Power supplies from 12 - 48VDC
DIN mounting

614.52 €
Item numberETH2SER5230A
On the way in
CYT-133SC is a serial port server - 1 x RS232 / 422/485 - 3 x digital inputs

External COM port and DI / DO via Ethernet and Internet
built-in web server
3 x Shift relays Expanses Max. 30 VDC 1A
3 x digital contact inputs
1 x RS232 (DB9 Male), RS422 or RS485 (screw terminal)
1 x Ethernet 10 / 100Mbit
Power supply from 9 to 24 VDC

223.91 €
Item numberETH1SER-R3I3+
Physically in stock
DIN rail bracket for eg. ETH1SER-MINI

Rest storage

Your bracket in Alu
can be used up other devices

23.85 €
Item numberETH1SER-MINI-DIN
Physically in stock
Showing 1-20 of 40 item(s)