Energy metering

Energy metering

Here are several RMS power meter that takes into account the phase shift that comes with capacitive and inductive loads such. from a motor. Can also be used on plain 230/400 VAC equipment. Software that can display the current consumption and tension. The software may also store the measurements with an adjustable interval. The consumption of the individual phases is read and the total consumption. Good to determine at what stage you should provide to, from a solar plant. Requires knowledge of the MODBUS protocol whose data you want retrieved otherwise. Description of the MODBUS can be found at https://www.modbus.org

Energy metering
There are 10 products.
Switch on and off power strip for equipment via LAN/WiFi (Network) - 8 x 240VAC. Web based PDU

Remote-controlled 230VAC power rail with on/off per output
1U 19" for rack mounting - rack bracket included
8 x 240VAC C-13 outlets
1 x C20 input plug. C-19 plug not included
Switch on / off Server via the network / Internet
User interface is via Web browser
Wi-Fi connection
Password protected
Supports iPhone and Android

475.30 €
Item numberNPOWER8+
On the way in
Energy meter and logger with 8x 230VAC IEC C13 - DANBIT

Energy meter Per outlet in KWh.
Cannot turn on / off exits !!
8 x 230vac IEC C13 Outlet with energy measurement in kWh per removal.
Web interface

508.66 €
Item numberNPOWER8IEC-E
Physically in stock
DIN Rail Single-Circuit Modbus Smart Power Meter kWh

DIN-rail single-circuit power meter
True RMS, 128 samples per cycle
1P2W, 1P3W, 3P3W or 3P4W systems
Input 20-400VAC L-N, 35-600VAC L-L
333mV CT or Rogowski coil input
1 x RS-485, Modbus RTU, 115200bps
THD, unbalance, demand, max/min
2MB flash data logging
128 x 64 LCD, white backlight
Pulse output, open collector 30VDC
85-264VAC or 100-300VDC
72 x 87.5 x 58.7 mm

Call +45 56 66 20 20 for price
Item numberLOG3F-D-E
On the way in
M-BUS to RS232/RS422/RS485 Converter, -25-+75°C, 100 Slaves

RS485 / RS422 / RS232 converter for Meter-Bus meters, actuators, etc.
Supports up to 100 Meter-Bus meters (slaves)
Selecting the serial port, only one can be selected to be active
2 x Baud rate (M-bus and COM port can be selected at different speeds)
Baud rate: 300 to 115,200 bps
Transparant data - no protocol conversion
M-bus connection is 2-wire , max. 350meter.
larger distance up to 5km requires a number of M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm | Removable terminal blocks
Operating temperature: -25 - + 75 ° C
DIN bracket
Robust plastic housing

393.56 €
Item numberM485-MBUS-I
Physically in stock
M-BUS to RS232 / RS422 / RS485 Master converter, 2 x Baud rate select. M-Bus standard: EN-13757

RS485 / RS422 / RS232 Master Gateway to Meter-Bus Slaves (sensors, actuators, etc.)
Supports up to 100 Meter-Bus meters (slaves)
MODBUS RTU function codes: 0x03 and 0x04 readdata
Selection of serial port, only one can be selected to be active
Baud rate x 2 (M-bus and COM port can be selected at different speeds)
Baud rate M-bUS: 300-2400 bps
Baud rate COM port: 300-115200 bps
Transparent data - no protocol conversion
M-BUS connection, 2-wire, max. 350meter.
Greater distance up to 5km requires a number M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm
Removable terminal blocks
Operating temperature: -25 - + 60°C
DIN mount 
Robust plastic case

402.67 €
Item numberM485-MBUS-MASTER-I
On the way in
Energy meter with 24 galvalically isolated I/O, RS-485, Digital and analog inputs

Multi input Data logger for up to 70000 loggings

10/100 Mbit Ethernet

Password-protected, web-based configuration and control

4 digital inputs, compatible with S0 pulse interface

6 analog inputs with 0/10V and 0/20mA

MODBUS RTU interface for up to 24 sensors (registers)

Up to 24 channels for monitoring

Up to 24 independent alarms

SNMP v.2 support - SNMP Trap - alarm notifications

HTTP and SNMP port change - HTTP API commands

Periodic HTTP posting of XML/JSON status files to client-server systems

MODBUS TCP/IP support

Dynamic DNS with DynDNS, No-IP and DNS-O-Matic support

NTP protocol support

Supply voltage: 10 to 28V DC

392.62 €
Item numberTCW260
Physically in stock
Power meter to the USB port - Test current mobile phone or PC

Very useful tool for servicetekinikeren

Target for consumption on the USB port is borderline.
Portable USB voltmeter with LCD display
3-7V / 50-3500mA / 0-19999mAh < br> Voltage Tester and leave
USB2.0 interface

17.96 €
Item numberTEST-USB-V
Physically in stock
Advanced 3 Phase Energy Meter with 4G & Cloud Logging

LCD Display

Active kWh (positive and negative), quadrant reactive

Undervoltage, undercurrent, overcurrent, underload

RS485 MODBUS RTU

4G for data (SIM card not included)

Cloud price is not included

Operating temperature -20℃~55℃

Max current 100A

IEC 62053-22:2003,IEC 62053-21:200

365.82 €
Item numberLOG3F-4G
On the way in
Showing 1-10 of 10 item(s)