Rest storage
2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.
1,500.00 kr
Item numberETH-BNC-AUI-REP
LAN extenders are used for a wired network connection (RJ45 PDS / PDU cable), where the distance between the 2 points is longer than the limit of 100 meters. If it is physically possible, up to 2 pieces can be placed. LAN extenders every 100 meters. It provides a maximum length of 300 meters. The LAN Extender is actually a 2-port network switch.
There are LAN extenders powered by PoE voltage. This PoE voltage can be passed on to the next 2 LAN extenders.
LAN distances in excess of 300 meters can be solved with VDSL modules, which can reach over 1 km. The connection is a 2-wire pair-twisted or coaxial cable.
LAN extenders over the mains are an emergency solution and here the 2 to several ELNET devices must be in the same phase .

Rest storage
2 Ports Repeater to 10 Base2 and 10 Base5 Network
BNC / Aui Ethernet
can convert between Aui and BNC networks.
REMAINING STOCK
Ethernet over telephone cable 1 x twisted pair cable
VDSL module with 8 port switch and SFP slot
Up to 100Mbps at 300 meters
Up to 1km - automatic speed adjustment
Break the 100 meter limit with a VDSL connection
Transparent data connection
8 port VDSL2 switch with 2 shared RJ45/SFP ports
Purchase ETH-VDSL2ROUTER to create a link
Use 2 ETH-VDSL2+ for an Ethernet connection (bridge)
Up to 1.4 km - automatic speed adjustment
2 pcs. ETH-VDSL2+ creates a transparent connection
It transfers data without changing it - like a network cable
Data speed depends on 2-wire quality and length
2 ETH-VDSL2+ automatically connect to each other.
PoE is NOT transmitted over the 2-wire connection
1 x LAN 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port
1 x VDSL2+ RJ11 female
Splitter for analog telephone connection included
Power supply: 54V/0.74A included
PoE+ PSE (30W) for e.g. Access Point, IP camera.
Prepared for DIN mounting, wall mounting
DIN brackets are purchased separately.
Use VDSL connection over 2-wire cable, where Wifi is an unstable connection
Up to 1.4 km over e.g. old telephone cable with 2 VDSL modules
Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+
Ethernet over 2-wire connection with VDSL
Ideal solution when the network distance is over the 100 meter limit
Ideal solution when a Wifi link is an unstable connection
Provides a transparent data connection
Supply: 5VDC, 2A power supply included
DIP switch: VDSL connection, one must be set to CPE and the other to CO.
Prepared for DIN mounting, wall mounting. DIN brackets are available separately.
SOLD INDIVIDUALLY! Order 2 pieces for a set.
Dimensions: 155 x 86 x 26 mm
1000 meter - network extender over coax cable.
Poe transferred in cable
1 x 10 / 100mbit base-TX RJ45
Auto-Negotiation / Auto-MDI / MDI-X
Poe Standard: IEEE 802.3AT / BY
PoE Output: 48-56VDC Max. 25 Watt
PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
1 x BNC Hun - RG59 Coax
Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
Power supplied from 48-56VDC min. 2amp
Use VDSL connection over 2-wire cable, where Wifi is an unstable connection
Provides a network connection without affecting data
Up to 1.4 km Ethernet bridge over e.g. 2-wire laid down telephone cable
Speed depends on cable and length - up to 90Mbps
Automatically adjusts speed to highest speed
Can also communicate with ETH-VDSL2+4+ (with 4 port switch)
1 x LAN 10/100 BASE-T RJ45 auto-MDI/MDI-X port
1 x RJ11 female (pin 3 and 4)
Supply: 5VDC, 2A power supply included
DIP switch: VDSL connection, one must be set to CPE and the other to CO.
Prepared for DIN mounting, wall mounting. Your bracket is purchased separately
SOLD SINGLELY! Order 2 pieces for a set.
Break 100 meter border with VDSL over RG59 Coax cable
1 x RJ45 10/100 / 1000Mbit
Up to 300mbit / s - duplex (automatic speed optimization)
Unroubing Data connection
Temperature: 0-50 ° C
5VDC 2A Power supply included
75Ω cable must be used
Use 2 pcs. Eth-VDSL-RG + G to a connection
Ethernet through the same phase of electric cables - sold as a set (2 pcs.)
Not suitable for industrial use.
10/100 / 1000Mbit PoE Network Extender
Extend the network cable with PoE over the magic 100 meters
4 pieces. Extenders provide a maximum distance of 500 meters
Extenders are powered from PoE and pass PoE on to the next Extender
Dimensions: 94 x 70 x 26 mm
PoE In: Max 30.8 Watts
PoE Out: Max 26 Watts
Weight: 189g
Transparent Ethernet connection up to 1200 meters
Medium range from 11 - 80 Mbps up to 1200 meters
Long range from 14 - 89 Mbps up to 700 meters
Range depends on cable quality etc.
Note: 2 pcs. to make a connection.
1 x RJ45 for LAN
1 x RJ45 for Link (RJ11 can also fit in the female connector
DIP switch to select Master or Slave mode
Dimensions: 97 x 70 x 26 mm
Cabinet: Metal
Weight: 189g
Supply voltage: 5VDC/2A
Temperature: 0 - +50°C
PoE extender with 1 x PoE in and 2 x PoE out
PoE extender to 100 meters.
Powered from the PoE source.
Power consumption: 2W
PoE to next extender
Up to 500 meters
100/1000Mbits
IEEE802.3af/at/bt
Temperature: -20 to +60°C
Dimensions: 133 x 73 x 41 mm