USB to 1 x RS232 COM port adapter
For Android tablet and phone
Connects via micro USB port
Baud rate up to 921.6 kbit/s
64.05 €
Item numberCNV232USB-A
Information on USB 3.0
At the end of 2008, USB 3.0 (Super-Speed) was clarified to a transfer rate of 5 Gbps. It is 10 times faster than USB 2.0. Products using USB 3.0 were presented in late 2009 and early 2010.
USB 3.0 supports USB 1.0, USB 1.1 and USB 2.0. This will provide a smooth transition from the current USB 1.0 and 2.0 to USB 3.0. The speed increase comes from extra pins on the USB 3.0 connector. USB 3.0 has 9 pins as opposed to USB 2.0 which has only 4 pins. The extra leg also means that where USB 2.0 delivered 500 mA, USB 3.0 can deliver 900 mA. It may eliminate the need for more power supplies that were previously needed due to this limitation.

USB to 1 x RS232 COM port adapter
For Android tablet and phone
Connects via micro USB port
Baud rate up to 921.6 kbit/s
Outputs 16 x USB 3.0 USB-A
Inputs 1 x USB-B 3.0-B
DC input 12VDC/ 7.5 amp (90 watts)
Turn on/ off button on each USB port
Up to 450MB/S 5GB/S Theoretical
Aluminum
Power Supply 12V/7.5a included
Dimensions: 123 x 54 x 25 mm
48 Watt USB charger with USB 3.0 Hub
10 x USB3.0 A she
8 x USB ports - max. 2.4a to USB port
2 x USB ports - Max. 1A for USB port
Note: Total power for all USB ports is 48 watts.
Button next to the USB port is on / off USB port
USB 3.0 cable from A to B included
input: AC 100-240V
Output: 12V / 4A (48W)
174 x 130 x 47 mm
Data transfer: 1.5 Mbs, 12 Mbs, 480 Mbs for 4 x USB2.0 ports
RJ45 on Transmitter and Receiver
Cat 5e/6 or more (straight through)
Use ONLY quality patch cord
Up to 120 meters
No driver needed
only 5V voltage on the transmitter (PSU included)
Receives the power supply via network cable
NOT RECOMENDED FOR USB CAMERA!
OTG cable adapter
USB 3.0 Type A Male to USB 3.1 C female
Color: Black
USB 2.0 extender over Ethernet cable
4 x USB 2.0 ports
Extension range up to 140 m
Supports CAT5e, CAT6, CAT7 cable
Controls remote USB devices
Digital signage, industrial control
Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC
4 port USB 3.0 HUB with DIN rail mounting
Can be powered from 7-24 VDC
Provides good noise immunity
Up to 900mA per port. by external supply.
USB cable for PC included
Voltage ONLY from terminal - int. jumper on DIS
Voltage from USB and clamp - int. jumper on ENA
RS-232 serial port by connecting to a USB port
Provides DC5V/250mA to external devices - Pin 9
Compact converter
Cable length of 100 cm
Power from host USB port
LEDs indicate TxD and RxD activity
Installs as a standard Windows COM port
Full RS-232 modem control signals and hardware/software flow control
Serial port protected with 15KV ESD protection
Non-standard baud rates supported
Easy plug and play installation and RS-232 device connection
High-speed serial port with baud rate up to 921.6 kbps
Supports Windows 11, 10, 8.1, 8, 7, XP, Windows Server 2025, 2022, 2019, 2016, 2012 R2, 2012 and 2008 R2
Supports Linux Kernel version 3.0 and later
Supports Apple-provided VCP on OS X 10.9 and later
Data bit - 7/8
Stop bit - 1, 2
FTDI chip - FT232xx.
Isolates and protects USB device from USB host
Electrical insulation up to 3000V both directions
Common mode filtering on all data lines
Output voltage: 5V 420mA
USB2.0 12 Mbps or USB1.1 1.5 Mbps with jumper
No software or drivers required
Short circuit protection
LED for power indication
Operating temperature: -40 - +70°C
Robust metal housing with DIN rail mounting
USB cable is securely locked to the case
USB ports: 3 external plus 1 internal
OS: Windows 98SE, 2000, XP, Vista and Linux
4 x USB-A 2.0 female
1 x RJ45 10/100 Ethernet
Power supply: 12VDC, 1A, terminal type (included)
Power consumption: 500mA
Operating temperature: 0 - 55°C
OS SUPPORT: Windows XP to 10, Windows Server 2003 to 2016
NOTE: PWR only lights up when network is connected
USB extender - also touch screen with USB.
Data transfer: 1.5Mb / s, 12Mb / s, 480Mb / s
2 x USB2.0
receiver powered from the transmitter with 24VDC of RJ45 cable
1 x Transmitter
1 x Receiver
Cat 5 or higher (only straight lines)
Up to 50 meters
Wall mounting
Supporter also touch screen
No driver needed
24VDC power supply included
NOT RECOMENDED FOR USB CAMERA!
Point to point USB extender over fiber cable.
Up to 350mets.
Select OM3 Multi Mode Fiber with LC connector
TX: 1x Micro-B USB, RX: 1x Type-A USB.
Compatible With USB 3.2 Gen 1
Plug-and-Play - no drivers.
Include a transmitter and receiver
USB 3.0 type-A (not compatible with USB 1.1, 2.0)
Up to 250 meters in distance (single or multimode)
Duplex LC (single or multimode) < br> USB 3.0 5Gbps bandwidth
Plug and play (no driver or software needed)
Optical wavelength: 1310 nm / 1550 nm
Material: Aluminum
Dimensions: 104 x 104 x 28mm Weight
: 0.7 kg
Supply voltage: 5V DC
Operating Temperature: 0 to 50 degrees
USB Type-C Dock to laptop or tablet.
USB-C 3.1 Gen 2 connection to host.
1 x 10/100/1000 Gigabit RJ45 Ethernet.
2 x USB 3.0 type A.
1 x HDMI 4K @ 30Hz.
USB-C PD connector (for computer power supply). Max 60W (20V / 3A).
Cable length: 12 cm.
Dimensions excl. Cable: 102.7 x 32.2 x 14.6 mm
Point to point USB extender over fiber cable.
Up to 350mets.
Select OM3 Multi Mode Fiber with LC connector.
TX: 2x Micro-B USB, RX: 2x Type-A USB.
Compatible with USB 3.2 Gen 1 / 2.0 / 1.1.
Plug-and-Play - no drivers.
USB 3.0, 2.0, 1.1
Max. Distance 100m
Transmission media CAT6a / 7
power required by both REX LEX
USB 3.1A
USB port 4 (built-HUB)
USB Review 5 Gbps
Power requirements 24V DC, 1A
USB 3.0 booster (extender) cable - 5 meters
SuperSpeed USB 3.0 male (type A) to USB 3.0 female (type A) connector
Powered from USB port
10 times faster than USB 2.0
OS support: Windows 2000, XP, VISTA, 7, 8, 10 & MAC
Industrial USB HUB with YOUR rail mounting
Can be powered from 7 - 24VDC - provides incredibly good noise immunity | DC24V400MA-D
Dimensions: 115 x 65 x 26mm
Steel cabinet, with flange for wall mounting