Converters and Gateways

Converters and gateways connect different protocols and physical interfaces within an automation system. They translate between serial communication, Ethernet, CAN, PROFIBUS, Modbus, HART and other standards. They are typically placed between older equipment using RS-232 or RS-485 and a newer controller or SCADA system on Ethernet. Manufacturer ICPDAS supplies a large part of the range.

The right choice depends on which protocols the equipment on each end uses. Look at the number and type of ports such as RS-232, RS-422/485, RJ45 or USB. Some models offer galvanic isolation that protects against noise and voltage differences. Others include built in PoE so they can be powered directly through the network cable. Also consider the temperature range and mounting form. Most units are designed for DIN rail mounting in cabinets and must handle industrial temperatures.

Converters and Gateways
There are 282 products.
USB to CAN Converter Module with Isolation, DIN-Rail, -25~75°C

USB to CAN converter module
NXP SJA1000T controller, 16MHz
CAN 2.0A/B, ISO-11898-2 support
DeviceNet protocol supported
USB 1.1/2.0, Type B connector
Transfer speed up to 921.6kbps
Baud rate 125k/250k/500k
Isolation 3000VDC/2500Vrms
DIN-rail mountable
Windows XP/7/8/10, Linux driver
-25 to +75C operating temp
Dimensions: 72 x 101 x 33 mm

300.16 €
Item numberUSB-CAN-CONVE-MODUL
On the way in
IEC 61850 MMS Gateway with Modbus TCP Client, DIN-Rail

IEC 61850 MMS server, Modbus TCP client
Cortex-A8 1GHz CPU
512MB DDR3 RAM
2 x RJ45 10/100/1000 Ethernet
2 x RS-232, 2 x RS-485 ports
2 x USB 2.0 Host ports
VGA output (Analog RGB)
OS: Linux Kernel 3.2.14
12-48VDC power input
35 x 167 x 119 mm (WxLxH)
-25~+75C (special components required)
DIN-Rail or wall mount

Call +45 56 66 20 20 for price
Item numberIEC-61850-MMS-GATEW
On the way in
DNP3 to Modbus TCP Protocol Gateway, Dual RJ45, RS-232/485

DNP3 Master, Modbus TCP Server
Cortex-A8 1GHz CPU
512MB DDR3 SDRAM
2x RJ45 Gigabit Ethernet
2x RS-232, 2x RS-485
2x USB 2.0 Host
Dual Watchdog Timer
Real Time Clock
Linux Kernel 3.2.14
-25~75C (special components required)
12-48VDC
35 x 167 x 119 mm

Call +45 56 66 20 20 for price
Item numberDNP3-MODBU-TCP-PROTO
On the way in
Ethernet I/O Module with PoE, 6 Digital Input, 7 Digital Output, RS-232/RS-485

Ethernet I/O module with PoE
6 x Digital Input, Wet Contact
7 x Digital Output, Open Collector
10/100 Base-TX RJ45 Ethernet
1 x RS-232, 1 x RS-485
PoE IEEE 802.3af Class 1
Watchdog Timer
DIN-Rail or Wall Mounting
12-48VDC (terminal block)
72 x 35 x 123 mm
-25-75°C (special components required)

286.76 €
Item numberETHER-MODUL-POE-DIGIT
On the way in
Ethernet I/O Module PoE, 4x DI Dry Contact, 4x DO Open Collector, RS-232/485

CPU 80186-80 MHz compatible
4 x Dry Contact Digital Input
4 x Open Collector Digital Output
10/100 Base-TX RJ45 Ethernet
2 x RS-232, 1 x RS-485 ports
PoE IEEE 802.3af Class 1
512KB Flash, 512KB SRAM
Watchdog Timer support
-25-75C (special components required)
12-48VDC power input
72 x 35 x 123 mm
DIN-Rail or Wall mounting

380.56 €
Item numberETHER-MODUL-POE-4X
On the way in
Ethernet I/O Module with PoE, 4x DI, 4x DO, RS-232/485

CPU: 80186-80 MHz or compatible
4 x Digital Input (Dry Contact)
4 x Digital Output (Open Collector)
1 x RJ45 10/100 Ethernet Port
2 x RS-232, 1 x RS-485 Serial
PoE IEEE 802.3af, Class 1
Watchdog Timer
Metal Casing, Wall Mounting
-25 to +75C (special components req.)
12-48VDC or PoE Powered
102 x 29 x 125 mm (W x L x H)

412.72 €
Item numberETHER-MODUL-POE-4X-2
On the way in
Ethernet I/O Module with PoE, 6x DI, 7x Open Collector DO, RS-232/485

Ethernet I/O module with PoE
6 x Digital Input (Wet Contact)
7 x Digital Output (Open Collector)
1 x RS-232, 1 x RS-485
10/100 Base-TX RJ45 Ethernet
Watchdog Timer
Metal casing, wall mounting
-25 to +75C operating temp
PoE 802.3af Class 1, 12-48VDC
102 x 29 x 125 mm

317.58 €
Item numberETHER-MODUL-POE-6X-2
On the way in
Ethernet I/O Module with 4x DI, 4x DO, RS-232/485 and PoE

4 x Digital Input, Dry Contact
4 x Digital Output, Open Collector
10/100 Base-TX RJ45 Ethernet
2 x RS-232, 1 x RS-485
PoE IEEE 802.3af Class 1
Watchdog Timer
Metal Casing, Wall Mounting
12-48VDC via Terminal Block
102 x 29 x 125 mm
-25/+75C (special components required)

426.12 €
Item numberETHER-MODUL-4X-DI-2
On the way in
Ethernet I/O Module with PoE, 6x Digital Input, 7x Digital Output, RS-232/485

6 x Digital Input (Wet Contact)
7 x Digital Output (Open Collector)
1 x RJ45 10/100 Base-TX Ethernet
1 x RS-232, 1 x RS-485 (5-wire)
Baud rate up to 115200 bps
DIN-Rail or Wall mounting
Consumption 2.2W
-25/+75C (special components required)
PoE IEEE 802.3af, Class 1
+12-48VDC Terminal Block
72 x 35 x 123 mm (WxLxH)
Humidity 5-90% RH non-condensing

272.02 €
Item numberETHER-MODUL-POE-6X
On the way in
Ethernet I/O Module with PoE, 4x DI, 4x DO, RS-232/485

Ethernet I/O module with PoE
4 x Dry Contact Digital Input
4 x Open Collector Digital Output
1 x RJ45 10/100 Ethernet Port
3x RS-232, 1x RS-485 Ports
115200 bps Max Baud Rate
Watchdog Timer
PoE IEEE 802.3af Class 1
12-48VDC Terminal Block Power
72 x 35 x 123 mm (WxLxH)
-25 to +75C Operating Temp
DIN-Rail or Wall Mount

387.26 €
Item numberETHER-MODUL-POE-4X-5
On the way in
DNP3 Slave to Modbus TCP Client Gateway, Cortex-A8, DIN-Rail, -25~75°C

DNP3 slave protocol, RS-485/TCP/UDP
Modbus TCP client, max 32 servers
Cortex-A8 1GHz CPU, 512MB DDR3
Dual Watchdog Timer, RTC included
2 x RJ45 10/100/1000 Base-TX
2 x RS-232, 2 x RS-485 ports
2 x USB 2.0 Host, VGA output
Metal casing, DIN-rail mount
Linux Kernel 3.2.14
12-48VDC, 4.8W consumption
35 x 167 x 119 mm (WxLxH)
-25~75°C (special components required)

Call +45 56 66 20 20 for price
Item numberDNP3-SLAVE-MODBU-TCP
On the way in
Ethernet I/O Module with PoE, 4 DI / 4 DO, RS-232/RS-485

4 x Dry Contact Digital Input
4 x Open Collector Digital Output
10/100Base-TX RJ45 Ethernet
2x RS-232 3-wire, 1x RS-232 5-wire
1x RS-485, 1kOhm bias resistor
Node address up to 254
Watchdog Timer
Metal casing, wall mounting
PoE IEEE 802.3af Class 1
12-48VDC via terminal block
102 x 29 x 125 mm
-25 to +75C (special components required)

432.82 €
Item numberETHER-MODUL-POE-DI
On the way in
Ethernet I/O Module with PoE, 4x Digital I/O, RS-232/485

4 x Digital Input, Dry Contact
4 x Digital Output, Open Collector
10/100 Base-TX RJ-45 Ethernet
1 x RS-232, 1 x RS-485, 1 x RS-485/422
PoE IEEE 802.3af Class 1
Watchdog Timer
Metal Casing, Wall Mounting
Humidity 5-90% RH, non-condensing
-25 to +75C (special components required)
12-48VDC (or PoE)
102 x 29 x 125 mm

426.12 €
Item numberETHER-MODUL-POE-4X-4
On the way in
USB to CAN Converter, Isolated, DIN-Rail, -25 to +75°C

1 x CAN port, ISO-11898-2, CAN 2.0A/B
Baud rate 5kbps to 1Mbps
Isolation 3000VDC / 2500Vrms
USB Type B, USB 1.1/2.0, 12Mbps
Selectable 120 ohm terminal resistor
256-frame receive buffer
DIN-Rail mounting, plastic casing
OS: Windows 2000/XP/7/8/10, Linux
Powered via USB bus power
Dimensions: 72 x 108 x 35 mm
-25 to +75°C operating temp
-30 to +80°C storage temp

265.32 €
Item numberUSB-CAN-CONVE-ISOLA-2
On the way in
2-Port HART to USB Gateway with Isolated Loop Power

HART Gateway via USB Type-C
2 Ports, Point-to-Point/Multi-Drop
Protocol: HART, Modbus RTU/ASCII
Loop Power +27VDC, max 15 devices
Isolation per UL1577 spec
Reverse polarity protection
Baud Rate 1200-115200 bps
Windows XP/7/8/10/11 (32/64-bit)
Input +10-30VDC
Dimensions 31 x 134 x 143 mm
-25-75°C (special components required)

684.74 €
Item numberPORT-HART-USB-GATEW
On the way in
Bluetooth LE to RFID Converter with 4x Digital I/O, RS-485, CAN Bus

Bluetooth LE to RFID/Wiegand converter
ISO 14443 A: Mifare Classic, Ultralight, DESFire
4 x Digital Input, 2 x Relay Output Form C
Contact Rating: 2A@30VDC, 0.5A@120VAC
Micro switch input for anti-sabotage detection
1 x RJ-45 10/100Base-T(X)
1 x RS-485, CAN Bus ISO-11898-2
Reverse polarity protection
Consumption: 2.0W
83 x 120 x 28 mm
20C to +60C operating temperature
Wall mounting, US outlet box compatible

196.98 €
Item numberBLUET-LE-RFID-CONVE
On the way in
2-Port USB to CAN FD Converter, Isolated, -25 to +75°C

2 x CAN 2.0 A/B and CAN FD ports
ISO 11898-2 compliant
CAN bit rate 10k-1M bps
CAN FD data up to 10M bps
Isolation 3000VDC / 2500Vrms
USB 2.0 High Speed interface
120 Ohm DIP switch terminal resistor
Metal casing, wall mount
Windows 7/8.1/10/11 driver
USB powered, 1.5W
-25 to +75°C (special components required)
111 x 102 x 27 mm

367.16 €
Item numberPORT-USB-CAN-FD
On the way in
USB to RS-232 Serial Converter, 1-Port, 300-921.6kbps

1 x RS-232 Port
Baud Rate 300 - 921.6 kbps
USB 1.1/2.0/3.0 Compliant
Type B USB Connector
Plastic Casing
Operating Temp -25 to +75C
Storage Temp -30 to +75C
Humidity 10-90% RH, non-cond.
Power Consumption 0.3W
+5VDC Input from USB
Dimensions 33 x 15 x 60 mm

75.04 €
Item numberUSB-RS-232-SERIA
On the way in
USB to CAN Converter, Isolated 1-Port, -25 to 75°C Wall Mount

USB 2.0 High Speed 480Mbps
1 x USB Type B connector
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 10k - 1M bps
Isolation 3000VDC / 2500Vrms
DIP switch 120 ohm terminator
Receive buffer 512 frames
Metal casing, wall mount
Windows 7/8.1/10/11 driver
+10-30VDC input, 1.5W
111 x 102 x 27 mm
-25-75°C (special components required)

326.96 €
Item numberUSB-CAN-CONVE-ISOLA
On the way in
USB to CAN Converter, 2-Port, CAN 2.0/FD, Isolated, DIN-Rail

2 x CAN ports (ISO 11898-2)
CAN 2.0 A/B and CAN FD support
USB 2.0 High Speed connection
CAN bit rate 10 kbps - 1 Mbps
CAN FD data rate up to 10 Mbps
Isolation 3000 VDC / 2500 Vrms
Metal casing, DIN-rail/wall mount
Windows 7/8.1/10/11 support
10-30VDC input power
102 x 120 x 36 mm
-25-75C (special components required)

363.14 €
Item numberUSB-CAN-CONVE-PORT
On the way in
Showing 1-20 of 282 item(s)