Item number ETHER-MODUL-POE-6X

Ethernet I/O Module with PoE, 6x Digital Input, 7x Digital Output, RS-232/485

6 x Digital Input (Wet Contact)
7 x Digital Output (Open Collector)
1 x RJ45 10/100 Base-TX Ethernet
1 x RS-232, 1 x RS-485 (5-wire)
Baud rate up to 115200 bps
DIN-Rail or Wall mounting
Consumption 2.2W
-25/+75C (special components required)
PoE IEEE 802.3af, Class 1
+12-48VDC Terminal Block
72 x 35 x 123 mm (WxLxH)
Humidity 5-90% RH non-condensing

272.02 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Wet ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-485
Consumption 2.2 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 67
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink(NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital inputs and outputs with serial communication in a compact DIN-rail housing. It is designed for industrial automation systems that need reliable remote monitoring and control over an Ethernet network.


6 x Digital Input · 7 x Digital Output · PoE IEEE 802.3af · RS-232/RS-485


Key Features

  • Digital I/O - 6 wet-contact inputs and 7 open-collector outputs for flexible field wiring
  • Power over Ethernet - powered via IEEE 802.3af Class 1 or a 12-48VDC terminal block
  • Serial connectivity - integrated RS-232 and RS-485 ports for legacy device integration
  • Wide operating range - operates reliably from -25 to +75C in harsh environments
  • Flexible mounting - fits DIN-rail or wall mounting for easy installation


Typical Applications

The module fits well into distributed control and monitoring systems where space is limited and environmental conditions are demanding.

  • Building automation and HVAC monitoring
  • Factory floor sensor and actuator control
  • Remote equipment status monitoring
  • Integration with legacy RS-232/RS-485 devices


A compact, PoE-powered I/O solution that brings reliable digital control to demanding industrial environments.