Item number ETHER-MODUL-POE-DIGIT

Ethernet I/O Module with PoE, 6 Digital Input, 7 Digital Output, RS-232/RS-485

Ethernet I/O module with PoE
6 x Digital Input, Wet Contact
7 x Digital Output, Open Collector
10/100 Base-TX RJ45 Ethernet
1 x RS-232, 1 x RS-485
PoE IEEE 802.3af Class 1
Watchdog Timer
DIN-Rail or Wall Mounting
12-48VDC (terminal block)
72 x 35 x 123 mm
-25-75°C (special components required)

286.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Open CollectorWet Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 1 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.9 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 76
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Industrial Ethernet I/O Module

This Ethernet I/O module combines digital input and output channels with serial communication in a single PoE-powered device. It is designed for remote monitoring and control of industrial equipment over standard Ethernet infrastructure.


6 x Digital Input · 7 x Digital Output · PoE IEEE 802.3af · RS-232/RS-485


Built for Reliable Industrial I/O Control

  • PoE Powered - single cable for data and power, no separate power supply needed
  • 6 Digital Inputs - wet contact inputs for monitoring sensors and switches
  • 7 Digital Outputs - open collector outputs for controlling relays and actuators
  • Dual Serial Ports - RS-232 and RS-485 for connecting legacy serial devices
  • Wide Operating Temperature - operates reliably from -25 to +75°C


Typical Applications

The module fits well into industrial control cabinets and remote monitoring installations where space and wiring simplicity matter.

  • Factory automation systems
  • Remote equipment monitoring
  • Building and facility management
  • DIN-rail mounted control panels


A compact, PoE-powered I/O module that brings reliable digital and serial control to any Ethernet network.