Item number ETHER-MODUL-POE-4X

Ethernet I/O Module PoE, 4x DI Dry Contact, 4x DO Open Collector, RS-232/485

CPU 80186-80 MHz compatible
4 x Dry Contact Digital Input
4 x Open Collector Digital Output
10/100 Base-TX RJ45 Ethernet
2 x RS-232, 1 x RS-485 ports
PoE IEEE 802.3af Class 1
512KB Flash, 512KB SRAM
Watchdog Timer support
-25-75C (special components required)
12-48VDC power input
72 x 35 x 123 mm
DIN-Rail or Wall mounting

380.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 2 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.2 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital input and output channels with serial communication ports, making it ideal for industrial automation and remote monitoring tasks. It connects directly to an Ethernet network and can be powered via PoE or a terminal block.


4 x Digital Input · 4 x Digital Output · PoE IEEE 802.3af · RS-232/RS-485


Key Features

  • PoE Powered - runs on a single Ethernet cable, no separate power supply needed
  • Dual Serial Ports - RS-232 and RS-485 for flexible device connectivity
  • Robust I/O - 4 dry contact inputs and 4 open collector outputs
  • Wide Operating Temperature - reliable operation from -25C to +75C
  • Watchdog Timer - automatic recovery ensures continuous operation


Typical Applications

The module fits well into industrial control systems where remote I/O and serial device integration are required.

  • Factory automation
  • Remote monitoring stations
  • Building management systems
  • SCADA and process control


A compact, PoE-powered I/O module that brings reliable digital control and serial connectivity to any Ethernet network.