Repeaters and Hubs

Repeaters and Hubs

Repeaters and hubs are used to extend and distribute the signal in an RS-485 network. An RS-485 cable can only carry a signal a certain distance and support a limited number of devices. A repeater boosts the signal so it can travel further. A hub splits a single RS-485 cable into several independent branches, which is useful when many remote I/O modules need to be spread across a cabinet or a production hall.

Choose based on the number of ports and whether the unit needs to isolate each branch electrically from the others. Isolation protects against ground loops and noise, and matters when cables run through electrically noisy environments. Also check the mounting type, most units sit on a DIN rail, along with supply voltage and support for Modbus RTU. Some models can also convert between RS-485 and RS-232 or USB.

Repeaters and Hubs
There are 8 products.
4-Port USB 2.0 Industrial Hub, DIN-Rail, 10-30VDC

4 x USB Type A downstream ports
1 x USB Type B upstream port
USB 1.1 / 2.0 compatible
Up to 480 Mbit/s high speed
500mA max per port
Metal casing, DIN-rail mounting
10-30VDC power input
-25 to +75C operating temp
-30 to +80C storage temp
10-90% RH non-condensing
32 x 108 x 86 mm (WxLxH)

162.14 €
Item numberPORT-USB-INDUS-HUB
On the way in
4-Port CAN Bus Repeater/Converter, Isolated, DIN-Rail, -25 to 75C

4 x CAN 2.0A/2.0B, ISO-11898-2
Baud rate 5 kbps - 1 Mbps
1 x RS-232 terminal block port
Isolation 3000VDC / 2500Vrms
Selectable 120 Ohm terminal resistor
High performance microcontroller
Status LEDs: 1 x Power, 4 x CAN
DIN-Rail mount, plastic casing
Power consumption 3W
Input range +10 to +30VDC
-25 to 75C (special components required)
32.3 x 99 x 77.5 mm

352.42 €
Item numberPORT-CAN-BUS-REPEA
On the way in
4-Port USB 2.0 Hub, DIN-Rail Mount, 480 Mbit/s, +10~30VDC

4 x USB Type A downstream ports
1 x USB Type B upstream port
USB 1.1 and 2.0 compatible
480 Mbit/s high speed mode
12 Mbit/s full speed mode
1.5 Mbit/s low speed mode
500mA max current per port
DIN-rail mounting, plastic casing
0 to 75C operating temperature
+10 ~ +30VDC power input
33 x 107 x 78 mm (W x L x H)
10-90% RH non-condensing

131.32 €
Item numberPORT-USB-HUB-DIN
On the way in
RS-485 Hub Module, 1 x Master to 3 x Slave, Isolated, DIN-Rail

1 x RS-485 input (Master)
3 x RS-485 output (Slave)
Three-way isolation 3000VDC
Baud rate 300 ~ 115200 bps
ESD protection IEC 61000-4-2
Power and communication status LED
DIN-rail mounting, plastic casing
10 ~ 30VDC input (non-isolated)
Consumption 2.16 W
72 x 35 x 122 mm (W x L x H)
25 ~ 75C operating temperature
10 ~ 90% RH, non-condensing

138.02 €
Item numberRS-485-HUB-MODUL-2
On the way in
Isolated Digital I/O Board, Universal PCI Bus, 12-24V Input

Universal PCI bus digital I/O board
Isolated inputs and outputs
Transfer speed 2.5/5/10/20 Mbps
Mini-clamp communication connector
Link and error status indicators
Up to 64 modules per network
Cable length up to 100M (10 Mbps)
Max 3 layers between I/O modules
Input range 12-24V
Internal 3.3V power
0 to +60C operating temperature
Humidity 10-90% RH non-condensing

309.54 €
Item numberISOLA-DIGIT-BOARD-UNIVE
On the way in
Isolated Digital I/O Board for PCI Bus, RJ-45, 12-24VDC

Universal PCI bus I/O board
Isolated digital I/O
RJ-45 communication connectors
Transfer speed 2.5-20 Mbps
Up to 64 modules per line
Cable length up to 100 m
Link and error status indication
Internal 3.3V power
Input range 12-24V
0 to 60C operating temperature
Humidity 10-90% RH, non-condensing

302.84 €
Item numberISOLA-DIGIT-BOARD-PCI-4
On the way in
RS-485 Repeater Module with 2500VDC Isolation, DIN-Rail

1 x RS-485 port
2500VDC 2-way isolation
ESD protection all terminals
300-115200 bps self-tuner
1200-115200 bps fixed baud
Bias resistor 1 kOhm
Max 254 node address
Plastic casing, DIN-rail mount
Consumption 0.6 W
10-90% RH non-condensing
52 x 95 x 27 mm
10-30VDC

120.60 €
Item numberRS-485-REPEA-MODUL-5
On the way in
4-Port CAN Bus Repeater with Isolation, RS-232, 5k~1Mbps

4 x CAN Bus ports, isolated
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 5 kbps - 1 Mbps
1 x RS-232 terminal block
3000 VDC / 2500 Vrms isolation
Selectable 120 Ohm terminal resistor
High performance microcontroller
Metal casing, wall-mounting
10-90% RH non-condensing
116.5 x 127 x 61.3 mm
-25 to +75C (special components required)
10-30VDC, 1.5W

406.02 €
Item numberPORT-CAN-BUS-REPEA-2
On the way in
Showing 1-8 of 8 item(s)