CAN and CANopen

CAN and CANopen

This category covers converters and gateways for CAN and CANopen. The products connect a CAN bus to USB, RS-232, RS-485 or Ethernet. They are typically used to give a PC or a controller access to the field bus in machines and production plants. Gateways for protocols such as DeviceNet and Modbus make it possible to link CAN based devices to a higher level network.

Choose based on the connection you need on one side and the CAN bus on the other. Check the number of CAN ports and whether CAN FD is supported. Isolation protects against noise and voltage differences between devices. Mounting is either DIN rail or wall mount. The temperature range shows whether the unit can handle industrial conditions.

CAN and CANopen
There are 71 products.
USB to CAN Converter Module with Isolation, DIN-Rail, -25~75°C

USB to CAN converter module
NXP SJA1000T controller, 16MHz
CAN 2.0A/B, ISO-11898-2 support
DeviceNet protocol supported
USB 1.1/2.0, Type B connector
Transfer speed up to 921.6kbps
Baud rate 125k/250k/500k
Isolation 3000VDC/2500Vrms
DIN-rail mountable
Windows XP/7/8/10, Linux driver
-25 to +75C operating temp
Dimensions: 72 x 101 x 33 mm

300.16 €
Item numberUSB-CAN-CONVE-MODUL
On the way in
USB to CAN Converter, Isolated, DIN-Rail, -25 to +75°C

1 x CAN port, ISO-11898-2, CAN 2.0A/B
Baud rate 5kbps to 1Mbps
Isolation 3000VDC / 2500Vrms
USB Type B, USB 1.1/2.0, 12Mbps
Selectable 120 ohm terminal resistor
256-frame receive buffer
DIN-Rail mounting, plastic casing
OS: Windows 2000/XP/7/8/10, Linux
Powered via USB bus power
Dimensions: 72 x 108 x 35 mm
-25 to +75°C operating temp
-30 to +80°C storage temp

265.32 €
Item numberUSB-CAN-CONVE-ISOLA-2
On the way in
2-Port USB to CAN FD Converter, Isolated, -25 to +75°C

2 x CAN 2.0 A/B and CAN FD ports
ISO 11898-2 compliant
CAN bit rate 10k-1M bps
CAN FD data up to 10M bps
Isolation 3000VDC / 2500Vrms
USB 2.0 High Speed interface
120 Ohm DIP switch terminal resistor
Metal casing, wall mount
Windows 7/8.1/10/11 driver
USB powered, 1.5W
-25 to +75°C (special components required)
111 x 102 x 27 mm

367.16 €
Item numberPORT-USB-CAN-FD
On the way in
USB to CAN Converter, Isolated 1-Port, -25 to 75°C Wall Mount

USB 2.0 High Speed 480Mbps
1 x USB Type B connector
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 10k - 1M bps
Isolation 3000VDC / 2500Vrms
DIP switch 120 ohm terminator
Receive buffer 512 frames
Metal casing, wall mount
Windows 7/8.1/10/11 driver
+10-30VDC input, 1.5W
111 x 102 x 27 mm
-25-75°C (special components required)

326.96 €
Item numberUSB-CAN-CONVE-ISOLA
On the way in
USB to CAN Converter, 2-Port, CAN 2.0/FD, Isolated, DIN-Rail

2 x CAN ports (ISO 11898-2)
CAN 2.0 A/B and CAN FD support
USB 2.0 High Speed connection
CAN bit rate 10 kbps - 1 Mbps
CAN FD data rate up to 10 Mbps
Isolation 3000 VDC / 2500 Vrms
Metal casing, DIN-rail/wall mount
Windows 7/8.1/10/11 support
10-30VDC input power
102 x 120 x 36 mm
-25-75C (special components required)

363.14 €
Item numberUSB-CAN-CONVE-PORT
On the way in
2-Port USB to CAN Converter, Isolated, DIN-Rail, -25 to 75°C

2 x isolated CAN ports (CAN2.0A/B)
Baud rate 5k - 1M bps
Isolation 3000VDC / 2500Vrms
Selectable 120ohm terminal resistor
128-frame buffer per CAN port
USB 1.1/2.0 Type B interface
DIN-Rail mounting
-25/+75C (special components required)
Windows 2000/XP/7/8/10, Linux
Powered via USB, 1.5W
72 x 108 x 35 mm

286.76 €
Item numberPORT-USB-CAN-CONVE
On the way in
CAN Bus Gateway, DeviceNet to Modbus TCP/RTU/ASCII, DIN-Rail

DeviceNet to Modbus TCP/RTU/ASCII
NXP SJA1000T CAN controller, 16MHz
1 x RJ-45 10/100Base-T(X) Ethernet
1 x RS-232, 1 x RS-485
Modbus TCP, ASCII, RTU protocols
Isolation 1000VDC DC-DC, 2500Vrms
120 Ohm terminal resistor jumper
Watchdog timer
DIN-Rail installation
10-30VDC power input
-25~+75C (special components required)
72 x 122 x 33 mm

434.16 €
Item numberCAN-BUS-GATEW-DEVIC
On the way in
RS-232 to CAN Converter, Isolated, NXP SJA1000T, -25 to 75°C

RS-232 to CAN converter module
1 x RS-232, 1 x RS-485 port
1 x RJ-45 10/100Base-T(X)
NXP SJA1000T controller, 16MHz
ISO-11898-2, CAN 2.0A/2.0B
CAN baud rate 10k-1M bps
Isolation 1000VDC / 2500Vrms
120 Ohm terminal resistor jumper
Metal casing, wall mount
+10 to +30VDC power input
-25~+75°C (special components required)
102 x 125 x 28 mm

397.98 €
Item numberRS-232-CAN-CONVE-6
On the way in
RS-232/RS-485 to CAN Converter with Isolation, -40 to 75°C

RS-232/RS-485 to CAN converter
NXP SJA1000T controller, 16 MHz
CAN 2.0A/2.0B, ISO-11898-2
Baud rate up to 1 Mbps
1000VDC/2500Vrms isolation
120 Ohm terminal resistor jumper
1 x RJ-45 10/100Base-T(X) port
Metal casing, wall mount
10-30VDC power input
-40 to 75C operating temp
102 x 125 x 28 mm

439.52 €
Item numberRS-232-RS-485-3
On the way in
RS-232 to CAN Converter Module, NXP SJA1000T, Isolated, -25 to 75°C

NXP SJA1000T CAN controller
Baud rate 10k to 1M
Transfer speed up to 921.6 kbps
Isolation 3000VDC / 2500Vrms
Built-in 120 ohm terminal resistor
CiA 301 v4.02 protocol, NMT master
Hardware watchdog timer
1 x USB Type B connector
Windows 98-10 and Linux support
-25/+75C (special components required)
72 x 101 x 33 mm
Humidity 10-90% RH, non-condensing

310.88 €
Item numberRS-232-CAN-CONVE-8
On the way in
RS-232/RS-485 to CAN Converter, Isolated, DIN-Rail

NXP SJA1000T CAN controller, 16MHz
RS-232 & RS-485 to CAN conversion
CAN 2.0A/2.0B, ISO-11898-2
1 x RJ-45 10/100Base-T(X) port
CAN baud rate 10k - 1M bps
Isolation 1000VDC / 2500Vrms
120 Ohm terminal resistor jumper
DIN-rail mount, metal housing
-25~75C (special components required)
10-30VDC input, 2.5W
72 x 122 x 33 mm

460.96 €
Item numberRS-232-RS-485-4
On the way in
DeviceNet to Modbus TCP/RTU/ASCII Gateway with DIN-Rail Mount

DeviceNet to Modbus TCP/RTU gateway
CPU: 80186, 80MHz compatible
NXP SJA1000T CAN controller, 16MHz
1 x RJ-45 10/100Base-T(X) port
1 x RS-232, 1 x RS-485 ports
Isolation: 1000VDC / 2500Vrms
120 Ohm terminal resistor jumper
DIN-Rail mounting
Operating temp: -25 to +75C
Input: +10 to +30VDC, 2.5W
Dimensions: 72 x 122 x 33 mm
Humidity: 10-90% RH non-condensing

440.86 €
Item numberDEVIC-MODBU-TCP-RTU
On the way in
USB to CAN Converter with Galvanic Isolation, DIN-Rail Mount

CAN 2.0A/2.0B interface
Baud rate 10k - 1M bps
3000 Vrms isolation (CAN side)
Selectable 120 Ohm resistor
USB 1.1/2.0, Type B connector
Receive buffer up to 1000 frames
DIN-rail mount, plastic casing
USB powered, 1.5W consumption
Windows XP/7/10/11, Linux
-25 to +75C operating temp
72 x 112 x 33 mm

223.78 €
Item numberUSB-CAN-CONVE-GALVA
On the way in
CAN Gateway with Modbus TCP/RTU, J1939 and RS-232/485

Modbus TCP/RTU and J1939 support
CAN 2.0A/B, ISO-11898-2 compliant
NXP SJA1000T CAN controller, 16MHz
80186 CPU, 80MHz
1x RS-232, 1x RS-485 port
1x RJ-45 Ethernet port
Isolation: 1000VDC / 2500Vrms
120 Ohm terminal resistor jumper
DIN-rail mounting
Consumption: 2W
Dimensions: 122 x 72 x 33 mm
-25/+75C (special components required)

463.64 €
Item numberCAN-GATEW-MODBU-TCP
On the way in
CAN Bus Converter with RS-232/RS-485, Isolated, DIN-Rail

CAN controller NXP SJA1000T, 16 MHz
CAN 2.0A/B, ISO-11898-2
Baud rate 10k - 1M bps
1 x RS-485/RS-232 port (shared)
1 x RS-485 port, self-tuner
Isolation 1000VDC / 2500Vrms
120 ohm terminal resistor jumper
3 x programmable status LEDs
Watchdog timer, built-in
-25-75°C (special components required)
+10-30VDC, 3W consumption
Dimensions: 72 x 122 x 33 mm

367.16 €
Item numberCAN-BUS-CONVE-RS
On the way in
CAN Bus Data Logger with SD Card Storage, USB 2.0, Isolated CAN Port

CAN Logger, ISO-11898-2, CAN 2.0A/B
Baud rate 10k - 1M bps
SD card storage, default 4GB, max 32GB
Time stamp resolution 10 us
3000 VDC / 2500 Vrms isolation
USB 2.0 High Speed, 480 Mbit/s
DIP switch 120 Ohm terminal resistor
Metal casing, wall mount
10-30VDC or USB power
102 x 102 x 44 mm
-25 to +75C (special components required)
10-90% RH non-condensing

546.72 €
Item numberCAN-BUS-DATA-SD
On the way in
RS-232 to CAN Converter Module, Isolated, -25 to 75°C DIN-Rail

RS-232 to CAN converter, isolated
1 x RS-232 port, 9-pin D-Sub
1 x CAN port, ISO-11898-2
CAN 2.0A/2.0B, 10k-1Mbps
RS-232 baud up to 230400bps
Isolation 3000VDC / 2500Vrms
External terminal resistor option
DIN-Rail mount, plastic housing
Run and Error status LEDs
10-30VDC power input
-25 to 75C operating temp
52 x 86 x 32 mm

160.80 €
Item numberRS-232-CAN-CONVE-2
On the way in
2-Port CAN FD to Ethernet Gateway with Modbus TCP, DIN-Rail

2 x CAN ports (ISO 11898-2, CAN FD)
CAN bit rate 10k - 1M bps
CAN FD data rate up to 10M bps
1 x RJ-45 10/100Base-TX Ethernet
Modbus TCP, HTTP, BOOTP, TFTP
3000VDC / 2500Vrms isolation
DIP switch 120 Ohm terminator
Metal DIN-rail housing
+10-30VDC power input
Consumption 1.2W
-25 - +75C (special components required)
122.0 x 160.0 x 28.0 mm

497.14 €
Item numberPORT-CAN-FD-ETHER
On the way in
Power Meter Interface with Modbus TCP, 2-Channel Relay Output, PoE

3-phase power meter interface
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage: 10-500V, 50/60Hz
Measures Vrms, Irms, kW, kWh, kVA
kVAh, kVAR, kVARh, PF, Frequency
1 second data update rate
2 x Power Relay output, Form A
5A @ 250VAC or 5A @ 30VDC
1x RJ45 10/100 Base-TX, Modbus TCP
12-48VDC or PoE, 2W consumption
-20 to 70C (special components required)
33 x 100 x 127 mm

302.84 €
Item numberPOWER-METER-INTER-MODBU
On the way in
4-Port CAN Bus Repeater/Converter, Isolated, DIN-Rail, -25 to 75C

4 x CAN 2.0A/2.0B, ISO-11898-2
Baud rate 5 kbps - 1 Mbps
1 x RS-232 terminal block port
Isolation 3000VDC / 2500Vrms
Selectable 120 Ohm terminal resistor
High performance microcontroller
Status LEDs: 1 x Power, 4 x CAN
DIN-Rail mount, plastic casing
Power consumption 3W
Input range +10 to +30VDC
-25 to 75C (special components required)
32.3 x 99 x 77.5 mm

352.42 €
Item numberPORT-CAN-BUS-REPEA
On the way in
Showing 1-20 of 71 item(s)