Item number ETHER-MODUL-POE-4X-4

Ethernet I/O Module with PoE, 4x Digital I/O, RS-232/485

4 x Digital Input, Dry Contact
4 x Digital Output, Open Collector
10/100 Base-TX RJ-45 Ethernet
1 x RS-232, 1 x RS-485, 1 x RS-485/422
PoE IEEE 802.3af Class 1
Watchdog Timer
Metal Casing, Wall Mounting
Humidity 5-90% RH, non-condensing
-25 to +75C (special components required)
12-48VDC (or PoE)
102 x 29 x 125 mm

426.12 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Dry ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 1 x 5-wire RS-2321 x RS-4851 x RS-485/RS-42210/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.9 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Metal
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 10 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital input and output channels with serial communication ports, making it ideal for industrial monitoring and control applications. It can be powered directly via PoE or through a terminal block, simplifying installation in the field.


4 x Digital Input · 4 x Digital Output · PoE IEEE 802.3af · RS-232/485/422


Key features and benefits

  • PoE Powered - eliminates the need for a separate power supply
  • Dry Contact Inputs - reliable detection of switch and sensor states
  • Open Collector Outputs - direct control of relays and actuators
  • Multiple Serial Ports - supports RS-232, RS-485 and RS-422 devices
  • Wide Operating Temperature - operates reliably from -25 to +75 degrees C


Typical applications

The module fits well into industrial automation and remote monitoring setups where robust I/O and communication are required.

  • Factory automation systems
  • Remote equipment monitoring
  • Building management systems
  • SCADA and process control networks


A rugged and versatile I/O module built for demanding industrial environments.