Item number ETHER-MODUL-POE-4X-2

Ethernet I/O Module with PoE, 4x DI, 4x DO, RS-232/485

CPU: 80186-80 MHz or compatible
4 x Digital Input (Dry Contact)
4 x Digital Output (Open Collector)
1 x RJ45 10/100 Ethernet Port
2 x RS-232, 1 x RS-485 Serial
PoE IEEE 802.3af, Class 1
Watchdog Timer
Metal Casing, Wall Mounting
-25 to +75C (special components req.)
12-48VDC or PoE Powered
102 x 29 x 125 mm (W x L x H)

412.72 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation Wall mounting
Type Open CollectorDry Contact
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)2 x 5-wire RS-2321 x RS-485
Consumption 2.2 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 4
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Sink (NPN)Source, Common Ground
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3
Stop Bit 1, 2: for COM1 ~ COM3
Casing Metal
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital input and output channels with serial communication ports, designed for industrial monitoring and control applications. It can be powered directly via PoE or through a terminal block, making installation flexible in demanding environments.


4x Digital Input · 4x Digital Output · PoE Powered · RS-232/485 Serial


Key Features and Benefits

  • Dry Contact Inputs - four channels for reliable status sensing
  • Open Collector Outputs - four channels for switching external loads
  • Dual Power Options - operates via PoE or 12-48VDC terminal block
  • Serial Connectivity - two RS-232 ports and one RS-485 port for legacy devices
  • Wide Temperature Range - operates from -25 to +75C with special components


Typical Applications

The module suits industrial environments where robust I/O and remote monitoring are required over Ethernet.

  • Factory automation monitoring
  • Remote equipment control
  • Building and facility management
  • Outdoor or wall-mounted installations


A rugged, flexible I/O module built for demanding industrial Ethernet networks.