Item number ETHER-MODUL-POE-6X-2

Ethernet I/O Module with PoE, 6x DI, 7x Open Collector DO, RS-232/485

Ethernet I/O module with PoE
6 x Digital Input (Wet Contact)
7 x Digital Output (Open Collector)
1 x RS-232, 1 x RS-485
10/100 Base-TX RJ45 Ethernet
Watchdog Timer
Metal casing, wall mounting
-25 to +75C operating temp
PoE 802.3af Class 1, 12-48VDC
102 x 29 x 125 mm

317.58 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation Wall mounting
Type Wet ContactOpen Collector
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE5 x digit 7 Segment
Ports 10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)1 x 5-wire RS-2321 x RS-485
Consumption 2.9 W
Dimensions (mm) 102 mm x 29 mm x 125 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Channels 67
Powered from Terminal Block +12 ~ 48 VDC
Sink/Source (NPN/PNP) Source, Common GroundSink (NPN)
ON Voltage Level +3.5 ~ +30 V
OFF Voltage Level +1 V max.
Load Voltage 30 VDC, max.
Load Current 100 mA, max.
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM2
Stop Bit 1, 2: for COM1 ~ COM2
Casing Metal
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Ethernet I/O Module

This Ethernet I/O module combines digital input and output channels with serial communication in a compact, PoE-powered unit. It is designed for remote monitoring and control of industrial equipment over standard Ethernet networks.


6x Digital Input · 7x Digital Output · PoE IEEE 802.3af · RS-232/RS-485


Key Features

  • PoE Powered - eliminates need for separate power wiring
  • 6x Wet Contact Inputs - flexible sensor and switch monitoring
  • 7x Open Collector Outputs - direct control of relays and actuators
  • Serial Interfaces - RS-232 and RS-485 for legacy device integration
  • Wide Operating Temperature - reliable from -25C to +75C


Typical Applications

The module fits environments where remote I/O control and monitoring over Ethernet is required.

  • Factory automation
  • Building and facility monitoring
  • Remote equipment control
  • SCADA and telemetry systems


A robust, PoE-powered I/O solution for demanding industrial Ethernet applications.