CAN and CANopen

CAN and CANopen

CAN and CANopen
There are 71 products.
CAN Bus Controller with 10/100 Ethernet, RS-232/485, DIN-Rail

ISO-11898-2, CAN 2.0A and CAN 2.0B
NXP SJA1000T CAN controller, 16MHz
CAN baud rate: 10k - 1M bps
1 x RS-232, 1 x RS-485
10/100Base-TX Ethernet, Auto-MDIX
Isolation: 1000VDC / 2500Vrms
120 Ohm terminal resistor jumper
Intel 80186 CPU, 80MHz
DIN-Rail mounting
+10 to +30VDC power input
Dimensions: 72 x 122 x 33 mm
-25/+75°C (special components required)

397.98 €
Item numberCAN-BUS-CONTR-10
On the way in
CANopen Digital I/O Module, 4/8 Channels, Isolated, DIN-Rail

CANopen protocol CiA 301/401
4 or 8 digital I/O channels, 5V/TTL
Isolation: 3000VDC / 2500Vrms
Built-in 120 Ohm terminal resistor
Baud rate 10k - 1M
Node ID 1-99, 10 RxPDO/10 TxPDO
Hardware watchdog timer
Status LEDs: PWR, RUN, ERR
DIN-rail mounting
Consumption 1.5W
Dimensions 33 x 99 x 78 mm
-25/+75C (special components required)

294.80 €
Item numberCANOP-DIGIT-MODUL-CHANN
On the way in
RS-232/RS-485 to CAN Bus Converter, Isolated, -40~75°C, DIN-Rail

RS-232/RS-485 to CAN converter
NXP SJA1000T CAN controller
ISO-11898-2, CAN 2.0A/2.0B
CAN baud rate 10k - 1M bps
RS-232 baud up to 115200bps
1000VDC / 2500Vrms isolation
120 Ohm terminal resistor jumper
1 x RJ-45 10/100Base-T(X)
DIN-Rail mount, plastic case
10-30VDC power input
72 x 122 x 33 mm
-40 to 75C operating temp

428.80 €
Item numberRS-232-RS-485
On the way in
RS-232 to CAN FD Converter, 2-Port Isolated DIN-Rail Module

RS-232 to CAN FD Converter, 2 Ports
ISO-11898-2, CAN 2.0A/B, CAN FD
CAN FD data rate up to 8000 kbps
Arbitration rate up to 1000 kbps
2500 Vrms digital isolation
3000V DC-DC isolation
Built-in 120 Ohm terminal resistor
DIN-Rail mount, plastic casing
10-30VDC input, 1W consumption
72 x 118 x 33 mm
-40 to +75C (special components required)

234.50 €
Item numberRS-232-CAN-FD-2
On the way in
CANopen I/O Module with 6 Analog Inputs, 2 Analog Outputs, DIN-Rail

CANopen CiA 301 v4.02 / CiA 401 v2.1
6 x Differential Analog Input, 16-bit
2 x Analog Output, 12-bit
2 x Digital Input (Wet contact)
1 x Isolated Open Collector Output
Sampling rate: 60 samples/sec
Baud rate: 10k - 1M
Built-in 120 ohm terminal resistor
Hardware watchdog timer
DIN-Rail mounting
-25 to +75°C operating temp
Dimensions: 33 x 99 x 78 mm

389.94 €
Item numberCANOP-MODUL-ANALO-INPUT
On the way in
CANopen I/O Module, 4 Digital Input / 4 Relay Output, DIN-Rail

CANopen protocol CiA 301/401
4 x Digital Input (Wet Contact)
4 x Relay Output (Form A)
Baud Rate 10k - 1Mbps
Isolation 3000VDC / 2500Vrms
Built-in 120 Ohm Terminal Resistor
Hardware Watchdog Timer
3 Status LEDs (PWR/RUN/ERR)
DIN-Rail Mounting
Power Consumption: 1.7W
33 x 99 x 78 mm
-25/+75C (special components required)

219.76 €
Item numberCANOP-MODUL-DIGIT-INPUT
On the way in
RS-232/422/485 to CAN Converter, Isolated, DIN-Rail Mount

RS-232/422/485 to CAN converter
Isolation 3000VDC / 2500Vrms
ISO-11898-2, CAN 2.0A/2.0B
CAN baud rate 10k-1M bps
Serial baud up to 230400bps
Built-in 120 ohm resistor
DIN-rail mount, plastic case
Run and Error status LEDs
-25 to +75C operating temp
+10-30VDC power input
52 x 93 x 27 mm

166.16 €
Item numberRS-232-422-485-2
On the way in
CANopen I/O Module, Isolated CAN Port, -25 to 75°C

CANopen CiA 301 v4.02 master protocol
NXP SJA1000T controller, 16 MHz clock
Baud rate: 10 kbps to 1 Mbps
1 x isolated CAN port
Isolation: 3000VDC / 2500Vrms
Built-in 120 ohm terminal resistor
Hardware watchdog timer
Status LEDs: PWR, RUN, ERR
2KB EEPROM, 512KB Flash, 512KB SRAM
Dimensions: 31 x 115 x 91 mm
Power consumption: 2W
-25 to +75°C operating temperature

294.80 €
Item numberCANOP-MODUL-ISOLA-CAN
On the way in
RS-232 to CAN Converter with RS-485/422, Isolated, DIN-Rail

RS-232, RS-485, RS-422 to CAN converter
CAN 2.0A/2.0B, 10kbps - 1Mbps
Isolation 3000VDC / 2500Vrms
Selectable 120 ohm terminal resistor
CAN buffer 1000 frames, serial 900
DIN-rail mount, plastic housing
-25-75C (special components required)
10-30VDC power input
72 x 118 x 33 mm
10-90% RH non-condensing

253.26 €
Item numberRS-232-CAN-CONVE-3
On the way in
CANopen I/O Module with 8x Digital Input, 8x Digital Output, DIN-Rail

CANopen CiA 301 v4.02, CiA 401 v2.1
8 x Digital Input, Wet Contact
8 x Digital Output, Open Emitter
Baud Rate: 10k - 1M
Built-in 120 Ohm Terminal Resistor
Isolation: 3000VDC / 2500Vrms
Hardware Watchdog Timer
DIN-Rail Mounting
Power Consumption: 1.7W
Dimensions: 33 x 99 x 78 mm
-25~75C (special components required)

219.76 €
Item numberCANOP-MODUL-8X-DIGIT
On the way in
CANopen I/O Module, 8 DI / 8 DO, Isolated, DIN-Rail, -25~75°C

8 x Digital Input (Wet), 3.5-30VDC
8 x Digital Output, Open-collector
CANopen CiA 301 / CiA 401 protocol
Baud rate 10kbps - 1Mbps
Built-in 120 Ohm terminal resistor
Isolation 3750 Vrms intra-module
3000VDC / 2500Vrms bus isolation
Hardware watchdog timer
3 LEDs: PWR, RUN, ERR
DIN-Rail mounting
Dimensions: 33 x 99 x 78 mm
-25-75C (special components required)

219.76 €
Item numberCANOP-MODUL-DI-DO
On the way in
DeviceNet Embedded Controller, 8 x Digital Input / 8 x Digital Output, DIN-Rail

DeviceNet interface, 125-500 kbps
8 x Digital Input (Wet Contact)
8 x Digital Output (Open Collector)
Sink/Source input, Sink output
Load Current: 700 mA per channel
Intra-module Isolation: 3750 Vrms
Node ID 0-63, Group 2 Only Server
Switchable 120 Ohm terminal resistor
DIN-Rail mounting
10-30VDC input, 1.5W consumption
Operating Temp: -25 to +75C
Dimensions: 32.3 x 99 x 77.5 mm

219.76 €
Item numberDEVIC-EMBED-CONTR-DIGIT
On the way in
CANopen I/O Module 8x Digital Input, 8x Pulse Output, DIN-Rail

CANopen protocol CiA 301/401
8x Digital Input, Wet Contact
8x Pulse Output, Source type
Baud Rate 10k - 1M
Built-in 120 Ohm terminal resistor
Isolation 3000VDC / 2500Vrms
Hardware Watchdog Timer
3 LEDs: PWR, RUN, ERR
DIN-Rail mounting
3.5W power consumption
33 x 99 x 78 mm
-25 to +75C operating temp

286.76 €
Item numberCANOP-MODUL-8X-DIGIT-2
On the way in
CANopen Embedded I/O Controller, 2x AI, 2x AO, 4x DI, 4x DO, -25 to 75°C

CANopen protocol (CiA 301, CiA 401)
2x Isolated Analog Input, 16-bit
2x Analog Output, 12-bit
4x Digital Input, Wet Contact
4x Digital Output, Open Collector
Baud Rate 10kbps - 1Mbps
Built-in 120 Ohm Terminal Resistor
Node ID 1-99, 10 RxPDO/TxPDO
Hardware Watchdog, 3 Status LEDs
DIN-Rail Mounting
-25 to +75C Operating Temperature
33 x 99 x 78 mm

379.22 €
Item numberCANOP-EMBED-CONTR-2X
On the way in
RS-232 to CAN FD Converter, 2 Ports, Isolated DIN-Rail -25 to 75°C

2 x RS-232 to CAN ports
CAN 2.0A/B and CAN FD support
ISO-11898-2 compliant
CAN bus baud rate 5k-800kbps
CAN FD data rate up to 8000kbps
2500Vrms isolation, 3000V DC-DC
Built-in 120 Ohm terminal resistor
DIN-rail mount, plastic casing
-25-75°C (special components required)
10-30VDC input, 1W consumption
10-90% RH non-condensing
Dimensions 72 x 118 x 33mm

214.40 €
Item numberRS-232-CAN-FD
On the way in
DeviceNet I/O Module with 16 Digital Channels, DIN-Rail Mount

DeviceNet interface, 16 x Digital I/O
Sink/Source, Wet contact type
ON: +3.5-30VDC, OFF: max 1VDC
Input impedance 3 kOhm, 0.3W
Baud rate 125/250/500 kbps
Switchable 120 Ohm terminal resistor
Node ID 0-63, DIN-Rail mount
Shutdown and Heartbeat message support
Consumption 1.5W
Input range +10-30VDC
Dimensions 32.3 x 99 x 77.5mm
-25~75C (special components required)

214.40 €
Item numberDEVIC-MODUL-16-DIGIT
On the way in
CANopen Embedded I/O Controller, 16-Channel Digital Input, DIN-Rail

CANopen protocol CiA 301/401
16 x Digital Input (Sink/Source)
Baud rate 10k - 1M bps
Built-in 120 ohm terminator
Node ID 1-99, 10 RxPDO/TxPDO
Node Guarding / Heartbeat support
Hardware watchdog timer
3 status LEDs: PWR RUN ERR
DIN-Rail mounting
Consumption 1.5W
33 x 99 x 78 mm
-25-75C (special components required)

214.40 €
Item numberCANOP-EMBED-CONTR-16
On the way in
CANopen Analog Input Module, 8 Diff / 16 SE Channels, 16-bit

CANopen I/O Module, CiA 301/401
8 Differential or 16 SE Inputs
16-bit, 4000 Samples/Sec
Accuracy +/-0.1% FSR
Voltage/Current Input Ranges
Isolation 3000VDC / 2500Vrms
Built-in 120 Ohm Terminator
Baud Rate 10k - 1M
Hardware Watchdog, 3 LEDs
DIN-Rail Mounting
-25-75C (special components required)
Dimensions: 33 x 99 x 78 mm

372.52 €
Item numberCANOP-ANALO-INPUT-MODUL
On the way in
DeviceNet I/O Module with 8x Digital Input and 8x Pulse Output

DeviceNet communication protocol
8 x Digital Input (Wet Contact)
8 x Pulse Output (Source), 500kHz
Baud rate 125/250/500 kbps
DIN-Rail installation
120 Ohm terminal resistor switch
Node ID range 0-63
Shutdown and Heartbeat messages
+10 ~ +30VDC, 2W
32.3 x 99 x 77.5 mm
-25 - +75°C (special components required)
Humidity 10-90% RH, non-condensing

286.76 €
Item numberDEVIC-MODUL-8X-DIGIT
On the way in
DeviceNet CAN Bus Controller with NXP SJA1000T, DIN-Rail, -25~+75°C

DeviceNet CAN controller, 4 slots
NXP SJA1000T controller, 16MHz
80186 CPU, 80 MHz compatible
Baud rate 125/250/500 kbps
Isolation 3000VDC / 2500Vrms
RS-232 utility port, 9-pin D-Sub
120 ohm terminal resistor jumper
DIN-Rail mounting
Real Time Clock, Watchdog IC
-25~+75°C (special components required)
10-30VDC power input
188 x 132 x 91 mm

498.48 €
Item numberDEVIC-CAN-BUS-CONTR
On the way in
Showing 21-40 of 71 item(s)