Item number CAN-BUS-CONTR-10

CAN Bus Controller with 10/100 Ethernet, RS-232/485, DIN-Rail

ISO-11898-2, CAN 2.0A and CAN 2.0B
NXP SJA1000T CAN controller, 16MHz
CAN baud rate: 10k - 1M bps
1 x RS-232, 1 x RS-485
10/100Base-TX Ethernet, Auto-MDIX
Isolation: 1000VDC / 2500Vrms
120 Ohm terminal resistor jumper
Intel 80186 CPU, 80MHz
DIN-Rail mounting
+10 to +30VDC power input
Dimensions: 72 x 122 x 33 mm
-25/+75°C (special components required)

397.98 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186, 80 MHz or compatible
Controller NXP SJA1000T with 16 MHz clock
Flash 512 KB; Erase unit is one sector (64 KB); 100,000 erase/write cycles
Installation DIN-Rail
Isolation 1000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Operating Temperature -25 ~ +75 °C
Terminal Resistor Jumper for 120 Ω terminal resistor
Real Time Clock Yes
Status 3 x Programmable
Ports 11 x RS-232 (5-pin screwed terminal block (TxD, RxD, RTS, CTS, GND))1 x RS-485 (Self-turner inside ; 2-pin screwed terminal block (DATA+, DATA-))10/100Base-TX Ethernet Controller (Auto-negotiating, Auto_MDIX)
Input Range +10 VDC ~ +30 VDC
Consumption 3 W
Dimensions (mm) 72 x 122 x 33 (W x L x H)
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps10 k ~ 1 M bps
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
SRAM 512 KB

CAN Bus Controller

A robust CAN Bus Controller designed for industrial data acquisition and control networks. It converts CAN bus signals to Ethernet or serial interfaces, enabling seamless integration into existing automation systems.


CAN 2.0A/2.0B · ISO-11898-2 · 10/100Base-TX Ethernet · DIN-Rail Mounting


Key Features

  • NXP SJA1000T Controller - reliable CAN communication with 16MHz clock
  • Isolated Design - 1000VDC DC-to-DC and 2500Vrms photo-couple isolation
  • Wide Temperature Range - operates from -25 to +75°C
  • Flexible Connectivity - RS-232 and RS-485 ports alongside Ethernet
  • Built-in Terminal Resistor - jumper-selectable 120 Ohm resistor


Typical Applications

This controller suits demanding industrial environments where reliable CAN bus communication is required.

  • Factory automation networks
  • Vehicle and machine monitoring systems
  • Building management systems
  • Remote industrial data logging


A dependable choice for integrating CAN bus networks into modern industrial control systems.