Item number CANOP-MODUL-ANALO-INPUT

CANopen I/O Module with 6 Analog Inputs, 2 Analog Outputs, DIN-Rail

CANopen CiA 301 v4.02 / CiA 401 v2.1
6 x Differential Analog Input, 16-bit
2 x Analog Output, 12-bit
2 x Digital Input (Wet contact)
1 x Isolated Open Collector Output
Sampling rate: 60 samples/sec
Baud rate: 10k - 1M
Built-in 120 ohm terminal resistor
Hardware watchdog timer
DIN-Rail mounting
-25 to +75°C operating temp
Dimensions: 33 x 99 x 78 mm

389.94 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Type Wet contact (Sink)+0V ~ +5V, +/-5V, +0 V ~ +10V,+/-10VIsolated Open Collector (Sink)
Operating Temperature -25 ~ +75 °C
Resolution 12-bit16-bit
Terminal Resistor Built-in 120Ω
Watchdog Timer Hardware watchdog
Status 3 LEDs to PWR, RUN and ERR
Consumption 1.8 W
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Overload Protection Yes
Short-circuit Protection Yes
Channels 16 (Differential)2
Accuracy +/-0.1% of FSR+/- 0.1% of FSR
Sampling Rate 60 Samples/Sec. (Total)
Input Impedance 10 KΩ, 0.66W
Overvoltage Protection 240 Vrms60 VDC70 VDC
Zero Drift +/- 10 μV/ °C
Span Drift +/-25 ppm/ °C
Voltage Output Capability 10 V @ 20 mA
Current Load Resistance 500 Ω
Power-on Value Yes
Safe Value Yes, ProgrammableYes
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC Max.
Load Voltage +3.5 ~ +50 VDC
Load Current 700 mA/channel Max.
Power on Value Yes, Programmable
Baud Rate 10 k ~ 1 M
Sensor Type +/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V, +/-20 mA (External 125Ω resistor required)
Common Mode Rejection 86 dB Min.
Normal Mode Rejection 100 dB
Individual Channel Configuration Yes
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
PDO Mode Event-triggered, remotely-requested, Cyclic and acyclic SYNC

CANopen I/O Module

This CANopen I/O module combines analog and digital signal handling in a single DIN-rail mounted unit. It is designed for industrial automation systems that require precise measurement and control over a CAN network.


6 Analog Inputs · 2 Analog Outputs · 2 Digital Inputs · CANopen CiA 301/401


Key Features and Benefits

  • 16-bit Analog Inputs - six differential channels deliver high measurement accuracy
  • 12-bit Analog Outputs - two configurable channels for precise actuator control
  • Isolated Digital I/O - wet-contact inputs and open-collector output ensure safe switching
  • CANopen Protocol - full CiA 301 v4.02 and CiA 401 v2.1 compliance for easy integration
  • Wide Temperature Range - operates from -25 to +75 degrees C for harsh environments


Typical Applications

The module suits environments where robust I/O and CAN bus communication must work together under variable conditions.

  • Industrial automation and process control
  • Machine and equipment condition monitoring
  • Mobile machinery and vehicle control systems
  • DIN-rail installations in control cabinets


A dependable choice for engineers who need accurate CANopen I/O control in demanding industrial settings.