CAN and CANopen

CAN and CANopen

CAN and CANopen
There are 71 products.
CAN Bus Data Logger, 2-Port with SD Card Storage, USB 2.0

2 x CAN port, ISO-11898-2
CAN 2.0A and CAN 2.0B
Baud rate 10 kbps - 1 Mbps
SD card storage, default 4GB
Max. 32GB SD card support
Binary file format logging
Time stamp resolution 10 us
USB 2.0 High Speed, 480 Mbit/s
Isolation 3000 VDC / 2500 Vrms
10 - 30VDC or USB powered
102 x 102 x 44 mm
-25 to 75C (special components required)

649.90 €
Item numberCAN-BUS-DATA-PORT
On the way in
RS-232 to CAN Converter, 2-Port, Isolated, -25 to 75°C, DIN-Rail

2 x RS-232 to CAN ports
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 5kbps - 1Mbps
Isolation 3000VDC / 2500Vrms
120 Ohm terminal resistor jumper
Built-in filter
DIN-rail mounting
Storage temp -30 to +80C
Humidity 10-90% RH non-condensing
Operating -25 to +75C (special comp.)
Input voltage +10-30VDC
Dimensions 72 x 122 x 33mm

257.28 €
Item numberRS-232-CAN-CONVE-4
On the way in
DeviceNet Analog Output Module, 4-Channel 14-bit Resolution

DeviceNet Analog Output Controller
4 Analog Output Channels
0-5V, +/-10V, 0-20mA, 4-20mA Outputs
14-bit Resolution
Accuracy +/-0.1%/+/-0.2% FSR
Baud Rate: 125/250/500 kbps
Node ID Range: 0-63
120 Ohm Terminal Resistor Switch
DIN-Rail Mounting
10-30VDC Power Input
Dimensions: 32.3 x 99 x 77.5 mm
-25~+75°C (special components required)

426.12 €
Item numberDEVIC-ANALO-OUTPU-MODUL
On the way in
USB to CAN Converter with Isolation, DIN-Rail, CAN 2.0A/B

USB 1.1/2.0, Type B connector
CAN ISO 11898-2, 2.0A/2.0B
Baud rate 10k - 1M bps
Isolation 3000VDC / 2500Vrms
120 Ohm terminal resistor jumper
Built-in filter
Power consumption 1W
Plastic casing, DIN-rail mount
OS: Windows XP/7/10/11, Linux
USB powered
52 x 87 x 27 mm
-25 to +75C operating temp

183.58 €
Item numberUSB-CAN-CONVE-ISOLA-3
On the way in
8-Channel Differential Analog Input Module for DeviceNet, 16-bit

DeviceNet analog input module
8 x differential channels
16-bit, +/-0.1% FSR accuracy
Input range +/-10V to 20mA
Baud rate 125/250/500 kbps
Node ID range 0-63
3000VDC isolation
DIN-rail mounting
10-30VDC power input
33 x 99 x 78 mm
-25/+75C (special components required)

364.48 €
Item numberCHANN-DIFFE-ANALO-INPUT
On the way in
DeviceNet Embedded Controller with NXP SJA1000T CAN Interface, DIN-Rail

80186 CPU, 80 MHz compatible
NXP SJA1000T CAN controller, 16MHz
DeviceNet protocol support
Baud rate 125k/250k/500k
2 slots, DIN-Rail installation
Isolation 3000VDC / 2500Vrms
Terminal resistor jumper 120 ohm
Node ID range 0-63
Watchdog IC, RTC, NVRAM backup
-25-75C (special components required)
10-30VDC input, 2W consumption
95 x 132 x 91 mm

333.66 €
Item numberDEVIC-EMBED-CONTR-NXP
On the way in
3-Phase Power Meter with RS-485 Modbus RTU, 10-500V Input

3-phase power meter, DIN-rail
Wiring: 3P4W-3CT, 3P3W, 1P2W, 1P3W
Input voltage: 10-500VAC
Input current: 0.05-5A
Accuracy better than 0.5% (PF=1)
Measures Vrms, Irms, kW, kWh, kVA, PF
1 x RS-485, Modbus RTU
Baud rate up to 115200
Isolation 3000VDC
12-48VDC, 2W
33 x 127 x 100 mm
20 to 70C (special components required)

265.32 €
Item numberPHASE-POWER-METER-RS-3
On the way in
CANopen Power Meter Interface, 2-Loop, RS-485 Modbus RTU, 12-48VDC

2-channel power meter interface
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage 10-500V, 50/60Hz
True RMS V/I, kW, kWh, kVA, PF
1 second data update rate
2 x Power Relay output, 5A
1 x RS-485, Modbus RTU
Baud rate up to 115200
3000VDC isolation
12-48VDC, 2W consumption
33 x 100 x 127 mm
-20 to 70C (special components required)

281.40 €
Item numberCANOP-POWER-METER-INTER-2
On the way in
RS-232 to CAN Converter with Isolation, DIN-Rail

RS-232 to CAN converter module
CAN 2.0A/B, ISO-11898-2
Baud rate: 10 kbps - 1 Mbps
3000VDC / 2500Vrms isolation
Selectable 120 ohm terminator
CAN receive buffer: 1000 frames
DIN-rail mount, plastic casing
+10 to +30VDC input
72 x 118 x 33 mm
-25~75C (special components required)

246.56 €
Item numberRS-232-CAN-CONVE
On the way in
CAN Bus Controller Module, CANopen Slave, Isolated, -25 to 75C

CANopen slave module, CiA 301 v4.02
NXP SJA1000T controller, 16MHz clock
1 x isolated CAN bus port
Baud rate 10k - 1M
Isolation 3000VDC / 2500Vrms
Built-in 120 ohm terminal resistor
Hardware watchdog timer
PWR, Rx/Tx, ERR status LEDs
Consumption 2W
Dimensions 31 x 115 x 91 mm
-25/75C (special components required)
Storage -40 to 80C, 5-90% RH

375.20 €
Item numberCAN-BUS-CONTR-MODUL-3
On the way in
16-Channel DeviceNet Digital Output Module, Open Collector, DIN-Rail

16 x Digital Output (Sink)
Open Collector Output
Load Voltage +5-30VDC, 100mA/ch
DeviceNet interface, 1 port
Baud rate 125/250/500 kbps
Node ID 0-63
Terminal resistor switch 120 Ohm
Isolation 3750 Vrms
DIN-Rail mounting
+10-30VDC, 1.5W
-25~75C (special components required)
32.3 x 99 x 77.5 mm

210.38 €
Item number16-CHANN-DEVIC-DIGIT
On the way in
DeviceNet Communication Controller with DIN-Rail Mount, -25 to 75°C

DeviceNet communication controller
NXP SJA1000T CAN controller, 16MHz
CPU 80186, 80MHz compatible
Baud rates 125k/250k/500k
Node ID range 0-63
Isolation 3000VDC / 2500Vrms
120 Ohm terminal resistor jumper
DIN-rail mounting
Watchdog IC, RTC included
10-30VDC power input
64 x 119 x 91 mm
-25-75C (special components required)

313.56 €
Item numberDEVIC-COMMU-CONTR-DIN
On the way in
CANopen Gateway with Modbus RTU, RS-232/422/485, DIN-Rail

Modbus RTU to CAN/J1939 gateway
1 x RS-232, RS-422, RS-485 ports
Baud rates up to 115200 bps
CAN port 250k baud, ISO-11898-2
CAN 2.0A/2.0B compliant
3000VDC isolation, 2500Vrms optocoupler
120 ohm terminal resistor jumper
DIN-rail mounting
Power consumption 1.5W
108 x 72 x 35 mm
-25 to +75C operating temp
10-90% RH non-condensing

494.46 €
Item numberCANOP-GATEW-MODBU-RTU
On the way in
CAN Bus Controller Module, 1-Port, NXP SJA1000T, Isolated

CAN bus communication module, 1 port
NXP SJA1000T controller, 16 MHz clock
CiA 301 v4.02 protocol, NMT Master
Baud rate 10 kbps to 1 Mbps
Isolation 3000 VDC / 2500 Vrms
Built-in 120 ohm terminal resistor
CPU 80186, 80 MHz compatible
EEPROM 16KB, Flash 512KB, SRAM 512KB
Hardware watchdog timer
Consumption 2W
Dimensions 31 x 115 x 91 mm
-25-75C (special components required)

375.20 €
Item numberCAN-BUS-CONTR-MODUL-2
On the way in
1-Port CAN Bus Controller Module, NXP SJA1000T, Isolated

NXP SJA1000T controller, 16 MHz clock
1 x CAN bus port
Baud rate 125k/250k/500k
Isolation 3000 VDC / 2500 Vrms
Switchable 120 ohm terminal resistor
Supports DeviceNet, CAN 2.0A/2.0B
ISO-11898-2 compliant
Watchdog timer built-in
Status LEDs: NS, RUN, MS
Power consumption 2W
Operating temp -25 to +75C
Dimensions 31 x 115 x 91 mm

364.48 €
Item numberPORT-CAN-BUS-CONTR
On the way in
Embedded CAN Bus Controller with NXP SJA1000T, Isolated

NXP SJA1000T CAN controller, 16MHz
ISO-11898-2, CAN 2.0A/2.0B compliant
Baud rate 10kbps to 1Mbps
3000VDC / 2500Vrms isolation
80186 CPU, 80MHz compatible
Watchdog IC included
Switchable 120 Ohm terminal resistor
512KB Flash, 512KB SRAM, 16KB EEPROM
Power, CAN status, mode indicators
1.5W power consumption
Dimensions: 31 x 91 x 115 mm
-25-75C (special components required)

363.14 €
Item numberEMBED-CAN-BUS-CONTR-2
On the way in
CANopen Analog Output Module, 4-Channel, 14-bit Isolated

CANopen protocol CiA 301 / CiA 401
4 x isolated analog output channels
Output: 0-10V, +/-10V, 0-5V, +/-5V
Current output: 0-20mA, 4-20mA
14-bit resolution
Accuracy +/-0.1% V, +/-0.2% mA
3000VDC isolation
Built-in 120 Ohm terminal resistor
Node ID 1-99, Baud 10k-1M
Hardware watchdog, 3 status LEDs
33 x 99 x 78 mm
-25/+75C (special components required)

426.12 €
Item numberCANOP-ANALO-OUTPU-MODUL
On the way in
8-Channel Isolated Analog Input Module, CANopen, 16-bit

CANopen CiA 301/401 protocol
8 x Analog Input Channels
16-bit Resolution, +/-0.1% FSR
Isolation: 3000 VDC
Overvoltage Protection 240Vrms
Baud Rate: 10k - 1M
Built-in 120 Ohm Terminal Resistor
DIN-Rail Installation
Sampling Rate: 10 Samples/Sec
-25 to +75C Operating Temp
Consumption: 2.0W
Dimensions: 33 x 99 x 78 mm

364.48 €
Item numberCHANN-ISOLA-ANALO-INPUT
On the way in
CANopen Digital Output Module, 16 Channels, Open-Collector, DIN-Rail

CANopen protocol CiA 301/401
16 sink digital output channels
Open-collector output type
Load voltage +5 to +30VDC
100 mA per channel
Hardware watchdog timer
3 LEDs: PWR, RUN, ERR
Baud rate 10k to 1M
Built-in 120 ohm terminator
DIN-rail mounting
-25/+75C (special components required)
33 x 99 x 78 mm

210.38 €
Item numberCANOP-DIGIT-OUTPU-MODUL
On the way in
CAN Bus Controller Module with NXP SJA1000T, -25 to 75°C

NXP SJA1000T CAN controller, 16MHz
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 10k - 1Mbps
Switchable 120 Ohm terminal resistor
Isolation 3000VDC / 2500Vrms
80186 CPU, 80MHz
512KB Flash, 512KB SRAM
16KB EEPROM
Watchdog timer
Power/CAN/Mode status LEDs
Dimensions: 31 x 91 x 115mm
-25 to 75C (special components required)

353.76 €
Item numberCAN-BUS-CONTR-MODUL
On the way in
Showing 41-60 of 71 item(s)