Item number CANOP-ANALO-INPUT-MODUL

CANopen Analog Input Module, 8 Diff / 16 SE Channels, 16-bit

CANopen I/O Module, CiA 301/401
8 Differential or 16 SE Inputs
16-bit, 4000 Samples/Sec
Accuracy +/-0.1% FSR
Voltage/Current Input Ranges
Isolation 3000VDC / 2500Vrms
Built-in 120 Ohm Terminator
Baud Rate 10k - 1M
Hardware Watchdog, 3 LEDs
DIN-Rail Mounting
-25-75C (special components required)
Dimensions: 33 x 99 x 78 mm

372.52 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Operating Temperature -25 ~ +75 °C
Resolution 16-bit
Terminal Resistor Built-in 120Ω
Watchdog Timer Hardware watchdog
Status 3 LEDs to PWR, RUN and ERR
Consumption 0.5 W
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Channels 8 Differential or 16 Single-ended (Software Selectable)
Accuracy +/-0.1% FSR
Sampling Rate 4000 Samples/Sec. (Total)
Input Impedance ≥ 1 MΩ
Overvoltage Protection 70 Vrms
Zero Drift ±0.2 μV/ °C
Span Drift ±5 ppm/ °C
Baud Rate 10 k ~ 1 M
Sensor Type ±10V, ±5V, ±2.5V, 0~10V, ±20mA, 0~20mA,4~20mA
Common Mode Rejection 84 dB
Individual Channel Configuration Yes
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
PDO Mode Event Triggered, Remotely requested, Cyclic and acyclic SYNC

CANopen I/O Module

This CANopen I/O module is a rugged embedded controller designed for industrial CAN bus networks. It converts analog signals into digital data for real-time monitoring and control in automation and process systems.


16-bit Resolution · 8 Differential / 16 Single-ended Channels · CiA 301/401 Protocol · DIN-Rail Mounting


Key Features and Benefits

  • High Resolution - 16-bit ADC ensures precise analog measurements
  • Flexible Inputs - Supports voltage and current signal ranges
  • Galvanic Isolation - 3000VDC/2500Vrms protects against noise and surges
  • Built-in Terminator - Integrated 120 Ohm resistor simplifies wiring
  • Hardware Watchdog - Increases reliability in unattended operation


Typical Applications

The module fits well into industrial automation and monitoring systems that rely on a CAN bus network.

  • Factory automation
  • Process monitoring
  • Machine control systems
  • Environmental data acquisition


A reliable and precise choice for demanding CANopen analog I/O applications.