CAN and CANopen

CAN and CANopen

CAN and CANopen
There are 71 products.
CANopen Power Meter Interface, 3-Phase, 2 x Relay Output

3-phase power meter via CANopen
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage 10-500V, 50/60Hz
Measures V, I, kW, kWh, kVA, PF
2 x Power Relay output
Contact rating 5A @ 250VAC/30VDC
Baud rate up to 1M, DIP selectable
Isolation 3000VDC
12-48VDC, 2W consumption
DIN-rail mounting, plastic casing
33 x 100 x 127 mm
-20 to 70C (special components required)

352.42 €
Item numberCANOP-POWER-METER-INTER-3
On the way in
3-Phase Power Meter with CANopen Interface, RS-485 Modbus RTU

3-phase power meter, CT input
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage: 10-500V
Frequency: 50/60Hz
Measures V, I, kW, kWh, kVA, PF
1 x RS-485, Modbus RTU
Baud rate up to 115200
8-digit LED display
Isolation 3000VDC
85-264VAC input, 6W
110 x 115 x 50 mm
-20 to 70C (special components required)

340.36 €
Item numberPHASE-POWER-METER-CANOP
On the way in
1-Port CAN Bus Controller, Isolated, NXP SJA1000T, -25~75°C

CPU: 80186, 80MHz or compatible
Controller: NXP SJA1000T, 16MHz clock
1 x CAN port, ISO-11898-2
CAN 2.0A and CAN 2.0B support
Baud rate 10kbps to 1Mbps
Isolation 3000VDC / 2500Vrms
120 Ohm terminal resistor jumper
EEPROM 2KB, Flash 512KB, SRAM 512KB
Real time clock
Consumption: 2W
Dimensions: 31 x 91 x 115 mm
-25~75°C (special components required)

304.18 €
Item numberPORT-CAN-BUS-CONTR-2
On the way in
Embedded CAN Bus Controller with DeviceNet, NXP SJA1000T, Isolated

NXP SJA1000T controller, 16MHz clock
1 x CAN bus port
Baud rate 125k/250k/500k
Supports DeviceNet protocol V1/V2
CAN 2.0A/2.0B, ISO-11898-2
Switchable 120 Ohm terminal resistor
3000VDC / 2500Vrms isolation
NS, RUN, MS status LEDs
Built-in watchdog timer
OS: Windows CE
Dimensions: 31 x 115 x 91 mm
-25/+75C (special components required)

294.80 €
Item numberEMBED-CAN-BUS-CONTR
On the way in
CANopen Embedded Controller, NXP SJA1000T, 2 Slots, DIN-Rail

NXP SJA1000T CAN controller, 16MHz
CiA 301 v4.02, CiA 401 v2.1 protocol
Baud rate 10k - 1M
32 RxPDO, 32 TxPDO
Node ID 1 - 255
Built-in 120 Ohm terminal resistor
3000VDC / 2500Vrms isolation
2 slots, DIN-rail or wall mount
PWR, RUN, ERR status LEDs
Real time clock, hardware watchdog
95 x 132 x 91 mm
-25~75C (special components required)

333.66 €
Item numberCANOP-EMBED-CONTR-NXP-2
On the way in
8-Channel RTD Input Module for CANopen, 16-bit, DIN-Rail

8-channel RTD input, 2/3-wire
Pt100/1000, Ni120, Cu100/1000, JPt100
16-bit resolution, +/-0.05% FSR
CANopen CiA301/401 protocol
Baud rate 10kbps - 1Mbps
Isolation 3000VDC / 3000Vrms
Open wire detection
Built-in 120 ohm terminal resistor
DIN-rail mounting, 1.5W consumption
Dimensions: 33 x 99 x 78 mm
-25~75C (special components required)
Storage -30~80C, 10-90% RH

414.06 €
Item numberCHANN-RTD-INPUT-MODUL
On the way in
Embedded CANopen Controller with 8 Slots, NXP SJA1000T Interface

CANopen slave controller, CiA 301/401
80186 CPU, 80 MHz compatible
NXP SJA1000T CAN, 16 MHz clock
8 CAN node slots
Baud rate 10 kbps - 1 Mbps
Isolation 3000VDC / 2500Vrms
Built-in 120 Ohm terminal resistor
1 x RS-232 console port
Hardware watchdog, real time clock
512KB Flash, 512KB SRAM, 2KB EEPROM
188 x 312 x 91 mm
-25~+75°C (special components required)

612.38 €
Item numberEMBED-CANOP-CONTR-SLOTS
On the way in
CANopen Embedded Controller with NXP SJA1000T, DIN-Rail, -25 to 75°C

CiA 301 v4.02 / CiA 401 v2.1 protocol
NXP SJA1000T controller, 16 MHz clock
Baud rate 10k to 1M
Isolation 3000VDC / 2500Vrms
Built-in 120 ohm terminal resistor
Node ID 1-255, 32 RxPDO/TxPDO
Hardware watchdog, RTC
DIN-Rail mounting
64 x 119 x 91 mm (W x L x H)
-25~+75°C (special components required)
Storage -30~+80°C
Humidity 10-90% RH non-condensing

313.56 €
Item numberCANOP-EMBED-CONTR-NXP
On the way in
CANopen Power Meter, 3-Phase, True RMS, DIN-Rail

3-phase power meter, CANopen protocol
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage: 10-500V
Input current: 0.05-5A
Input frequency: 50/60Hz
Accuracy better than 0.5% (PF=1)
Measures Vrms, Irms, kW, kWh, kVA, PF
Baud rate up to 1M, DIP selectable
Isolation 3000VDC
DIN-rail mounting, plastic casing
12-48VDC, 2W consumption
33 x 127 x 100 mm

337.68 €
Item numberCANOP-POWER-METER-PHASE
On the way in
4-Port CAN Bus Repeater with Isolation, RS-232, 5k~1Mbps

4 x CAN Bus ports, isolated
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 5 kbps - 1 Mbps
1 x RS-232 terminal block
3000 VDC / 2500 Vrms isolation
Selectable 120 Ohm terminal resistor
High performance microcontroller
Metal casing, wall-mounting
10-90% RH non-condensing
116.5 x 127 x 61.3 mm
-25 to +75C (special components required)
10-30VDC, 1.5W

406.02 €
Item numberPORT-CAN-BUS-REPEA-2
On the way in
CANopen Embedded Controller, 4-Slot, 80186 CPU, -25 to 75°C

NXP SJA1000T CAN controller, 16MHz
CiA 301 v4.02, CiA 401 v2.1 protocol
4 expansion slots
80186, 80MHz compatible CPU
1 x RS-232 console port
Baud rate 10k - 1M
Built-in 120 ohm terminal resistor
32 RxPDO / 32 TxPDO
Node ID 1 - 255
188 x 132 x 91 mm
-25~+75°C (special components required)
Storage: -30~+80°C

498.48 €
Item numberCANOP-EMBED-CONTR-SLOT
On the way in
Showing 61-71 of 71 item(s)