Item number CANOP-MODUL-8X-DIGIT

CANopen I/O Module with 8x Digital Input, 8x Digital Output, DIN-Rail

CANopen CiA 301 v4.02, CiA 401 v2.1
8 x Digital Input, Wet Contact
8 x Digital Output, Open Emitter
Baud Rate: 10k - 1M
Built-in 120 Ohm Terminal Resistor
Isolation: 3000VDC / 2500Vrms
Hardware Watchdog Timer
DIN-Rail Mounting
Power Consumption: 1.7W
Dimensions: 33 x 99 x 78 mm
-25~75C (special components required)

219.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Type Open emitterWet Contact
Operating Temperature -25 ~ +75 °C
Terminal Resistor Built-in 120Ω
Watchdog Timer Hardware watchdog
Status 3 LEDs to PWR, RUN and ERR
Consumption 1.7 W
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Intra-module Isolation 3750 Vrms
Channels 8
Input Impedance 3kΩ, 0.3W
Sink/Source (NPN/PNP) Sink/SourceSource
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC Max
Load Voltage +10 ~ +30 VDC
Load Current 700mA, each channel
Baud Rate 10 k ~ 1 M
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
PDO Mode Event-triggered, remotely-requested, Cyclic and acyclic SYNC

CANopen I/O Module

This CANopen I/O module is a DIN-rail mounted embedded controller for CAN bus networks, combining digital inputs and outputs in a single compact unit. It is designed for industrial automation systems that require reliable, isolated I/O control over CANopen.


8x Digital Input · 8x Digital Output · CiA 301/401 Protocol · DIN-Rail Mounting


Key Features

  • 8x Wet Contact Digital Inputs - detect field signals from +3.5 to +30VDC
  • 8x Open Emitter Digital Outputs - drive loads up to 700mA per channel
  • Built-in 120 Ohm Terminal Resistor - simplifies CAN bus termination
  • High-Speed Baud Rate - supports 10k to 1M bps for flexible network design
  • Triple Isolation - 3000VDC DC-to-DC and 2500Vrms photo-coupled protection


Typical Applications

The module fits into industrial control environments where digital I/O must be integrated into a CANopen network.

  • Factory automation systems
  • Machine monitoring and control
  • Building and process automation
  • Distributed I/O for CAN networks


A robust, isolated CANopen I/O solution for demanding industrial CAN bus applications.