Item number CANOP-MODUL-DI-DO

CANopen I/O Module, 8 DI / 8 DO, Isolated, DIN-Rail, -25~75°C

8 x Digital Input (Wet), 3.5-30VDC
8 x Digital Output, Open-collector
CANopen CiA 301 / CiA 401 protocol
Baud rate 10kbps - 1Mbps
Built-in 120 Ohm terminal resistor
Isolation 3750 Vrms intra-module
3000VDC / 2500Vrms bus isolation
Hardware watchdog timer
3 LEDs: PWR, RUN, ERR
DIN-Rail mounting
Dimensions: 33 x 99 x 78 mm
-25-75C (special components required)

219.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Type Open-collectorWet
Operating Temperature -25 ~ +75 °C
Terminal Resistor Built-in 120Ω
Watchdog Timer Hardware watchdog
Status 3 LEDs to PWR, RUN and ERR
Consumption 1.5 W
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Intra-module Isolation 3750 Vrms
Channels 8 (Sink/Source)8 (Sink)
Input Impedance 3 kΩ, 0.3 W
ON Voltage Level +3.5 ~ +30 VDC
OFF Voltage Level +1 VDC Max.
Load Voltage +5 ~ +30 VDC
Load Current 700 mA per channel
Baud Rate 10 k ~ 1 M
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
Error Control Node Guarding protocol or Heartbeat Producer
NMT Slave
EMCY Message Yes
PDO Mode Event Triggered, Remotely requested, Cyclic and acyclic SYNC

CANopen I/O Module

This CANopen I/O module is an embedded CAN bus controller designed for industrial digital input and output applications. It combines 8 isolated digital inputs and 8 open-collector outputs in a compact DIN-rail housing, making it ideal for distributed control systems.


8 Digital Inputs · 8 Digital Outputs · CANopen CiA 301/401 · DIN-Rail Mounting


Key Features

  • 8 Digital Inputs - wet type inputs accept 3.5-30VDC signals
  • 8 Digital Outputs - open-collector outputs handle up to 700mA per channel
  • CANopen Protocol - supports CiA 301 v4.02 and CiA 401 v2.1 for standardized communication
  • Built-in Terminal Resistor - integrated 120 Ohm resistor simplifies bus termination
  • Robust Isolation - 3750 Vrms intra-module isolation and 3000VDC/2500Vrms bus isolation protect against electrical noise


Typical Applications

The module fits well into industrial automation networks where reliable digital I/O over CAN bus is required.

  • Factory automation control panels
  • Building and facility monitoring systems
  • Machine control and status monitoring
  • Distributed I/O for CANopen networks


A reliable, isolated CANopen I/O solution for demanding industrial environments.