Item number CANOP-MODUL-ISOLA-CAN

CANopen I/O Module, Isolated CAN Port, -25 to 75°C

CANopen CiA 301 v4.02 master protocol
NXP SJA1000T controller, 16 MHz clock
Baud rate: 10 kbps to 1 Mbps
1 x isolated CAN port
Isolation: 3000VDC / 2500Vrms
Built-in 120 ohm terminal resistor
Hardware watchdog timer
Status LEDs: PWR, RUN, ERR
2KB EEPROM, 512KB Flash, 512KB SRAM
Dimensions: 31 x 115 x 91 mm
Power consumption: 2W
-25 to +75°C operating temperature

294.80 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186, 80 MHz or compatible
Controller NXP SJA1000T with 16 MHz clock
Flash 512 KB
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Driver WinPAC, ViewPAC XPAC, XPAC-CE6 (ISaGRAF not supported)
Operating Temperature -25 ~ +75 °C
Terminal Resistor Built-in 120Ω
SDK eVC++4.0, VC++, VB.net, C#.net
Watchdog Timer Hardware watchdog
Status PWR LED, RUN LED, ERR LED
Ports 1
Consumption 2 W
Dimensions (mm) 31 x 115 x 91 (W x L x H)
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Baud Rate 10 k ~ 1 M
Protocol CiA 301 v4.02
EEPROM 2 KB
SRAM 512 KB
NMT Master

CANopen I/O Module

This CANopen I/O Module is an embedded controller designed to add a reliable, isolated CAN bus interface to WinPAC, ViewPAC and XPAC controllers. It handles CANopen master (NMT) communication and is built around the industry standard NXP SJA1000T CAN controller.


NXP SJA1000T Controller · CiA 301 v4.02 Protocol · Isolated CAN Port · -25 to +75°C Operation


Key Features

  • Isolated CAN Port - protects the system against ground loops and voltage spikes
  • CANopen Master (NMT) - manages communication with all network nodes
  • Built-in 120 Ohm Terminator - simplifies bus wiring and reduces external components
  • Hardware Watchdog Timer - automatically recovers the module after a fault
  • Wide Operating Temperature - runs reliably from -25 to +75°C


Typical Applications

The module fits into industrial systems that require robust and isolated CAN communication.

  • Industrial automation and control
  • Factory floor monitoring systems
  • Machine-to-machine communication
  • Building and process automation


A robust, isolated CANopen interface built for demanding industrial environments.