There are 282 products.
CAN Bus Controller Module with NXP SJA1000T, -25 to 75°C

NXP SJA1000T CAN controller, 16MHz
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 10k - 1Mbps
Switchable 120 Ohm terminal resistor
Isolation 3000VDC / 2500Vrms
80186 CPU, 80MHz
512KB Flash, 512KB SRAM
16KB EEPROM
Watchdog timer
Power/CAN/Mode status LEDs
Dimensions: 31 x 91 x 115mm
-25 to 75C (special components required)

353.76 €
Item numberCAN-BUS-CONTR-MODUL
On the way in
Programmable Device Server with 4x Serial RS-232/485, 10/100 Ethernet

80186-80 MHz CPU or compatible
3 x RS-232, 1 x RS-485 ports
10/100 Base-TX RJ-45 Ethernet
Max baud rate 115200 bps
512 KB Flash, 512 KB SRAM
16 KB EEPROM, 40-yr retention
Watchdog timer
DIN-rail or wall mounting
-25-75C (special components required)
10-30VDC power input
72 x 35 x 123 mm

341.70 €
Item numberPROGR-DEVIC-SERVE-4X-2
On the way in
Programmable Device Server, RS-232/485 to 10/100 Ethernet, DIN-Rail

CPU 80186-80 MHz or compatible
10/100 Base-TX Ethernet port
RS-232/485 port, 5-wire
Baud rate up to 115200 bps
Max. 254 node addresses
Watchdog timer
DIN-rail or wall mounting
-25-75C (special components required)
10-30VDC power input
72 x 35 x 123 mm (WxLxH)
Power consumption 2.0W
Storage -40-80C

387.26 €
Item numberPROGR-DEVIC-SERVE-RS-6
On the way in
Programmable Device Server with RS-232/485, 10/100 Ethernet, DIN-Rail

80186-80 MHz compatible CPU
1x RS-232, 4x RS-485 ports
10/100 Base-TX Ethernet RJ-45
Baud rate up to 115200 bps
Max 254 node address
Built-in watchdog timer
DIN-Rail or wall mounting
-25-75C (special components required)
Storage -40 to 80C, 5-90% RH
10-30VDC power input
72 x 35 x 123 mm (WxLxH)

402.00 €
Item numberPROGR-DEVIC-SERVE-RS-7
On the way in
1-Port CAN Bus Controller, Isolated, NXP SJA1000T, -25~75°C

CPU: 80186, 80MHz or compatible
Controller: NXP SJA1000T, 16MHz clock
1 x CAN port, ISO-11898-2
CAN 2.0A and CAN 2.0B support
Baud rate 10kbps to 1Mbps
Isolation 3000VDC / 2500Vrms
120 Ohm terminal resistor jumper
EEPROM 2KB, Flash 512KB, SRAM 512KB
Real time clock
Consumption: 2W
Dimensions: 31 x 91 x 115 mm
-25~75°C (special components required)

304.18 €
Item numberPORT-CAN-BUS-CONTR-2
On the way in
CANopen Power Meter Interface, 3-Phase, 2 x Relay Output

3-phase power meter via CANopen
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage 10-500V, 50/60Hz
Measures V, I, kW, kWh, kVA, PF
2 x Power Relay output
Contact rating 5A @ 250VAC/30VDC
Baud rate up to 1M, DIP selectable
Isolation 3000VDC
12-48VDC, 2W consumption
DIN-rail mounting, plastic casing
33 x 100 x 127 mm
-20 to 70C (special components required)

352.42 €
Item numberCANOP-POWER-METER-INTER-3
On the way in
3-Phase Power Meter with CANopen Interface, RS-485 Modbus RTU

3-phase power meter, CT input
Wiring: 3P4W, 3P3W, 1P2W, 1P3W
Input voltage: 10-500V
Frequency: 50/60Hz
Measures V, I, kW, kWh, kVA, PF
1 x RS-485, Modbus RTU
Baud rate up to 115200
8-digit LED display
Isolation 3000VDC
85-264VAC input, 6W
110 x 115 x 50 mm
-20 to 70C (special components required)

340.36 €
Item numberPHASE-POWER-METER-CANOP
On the way in
3G/4G Gateway with GPS, RS-232/485, CAN Bus, RJ-45

ARM CPU, Watchdog Timer
LTE FDD B1/B3/B5/B7/B8/B20
DC-HSPA+ up to 42 Mbps DL
GPRS Class 12, 850/900/1800/1900 MHz
GPS NMEA 0183, 32 channels
1 x RJ-45 10/100Base-T(X)
1 x RS-232 Console/Debug, 1 x RS-232
1 x RS-485 isolated 3000VDC
CAN Bus interface
SD Card slot, max 32GB SDHC
Metal casing, DIN-Rail/Screw
117 x 126 x 58 mm, -25 to 75C (special components required)

948.72 €
Item number3G-4G-GATEW-GPS-5
On the way in
Serial Device Server with PoE, RS-232, DIN-Rail, -25 to 75°C

1 x RS-232 Serial Port (5-wire)
PoE IEEE 802.3af, Class 1
32-bit ARM CPU
Baud rate up to 115200 bps
DIN-Rail Mounting
Plastic Casing
Humidity 10-90% RH
-25 to +75°C (special components req.)
12-48VDC or PoE Powered
52 x 27 x 90 mm (W x L x H)

142.04 €
Item numberSERIA-DEVIC-SERVE-POE-4
On the way in
Serial Device Server with 4x RS-232/485 Ports and 10/100 Ethernet

Serial Device Server, 4x RS-232/RS-485
10/100 Base-TX Ethernet RJ-45
80186-80MHz compatible CPU
Baud rate up to 115200 bps
Node address up to 254
Watchdog Timer
DIN-Rail or Wall mounting
-25~75C (special components required)
+10-30VDC power input
72 x 35 x 123 mm (W x L x H)

368.50 €
Item numberSERIA-DEVIC-SERVE-4X-3
On the way in
Programmable Device Server, 8x RS-232/485, 10/100 Ethernet, -25~75°C

Programmable Device Server, 8 Ports
6x RS-232 (3-wire), 1x RS-232 (5-wire)
1x RS-485, Baud rate up to 115200 bps
10/100 Base-TX Ethernet, RJ-45
CPU: 80186-80 MHz compatible
512 KB Flash, 512 KB SRAM, 16 KB EEPROM
Watchdog timer
DIN-rail or wall mounting
+10-30VDC power input
72 x 35 x 123 mm (W x L x H)
-25/75°C (special components required)
Humidity 5-90% RH non-condensing

418.08 €
Item numberPROGR-DEVIC-SERVE-8X
On the way in
Programmable Device Server with 2-Port Ethernet, RS-232, DIN-Rail

80186-80 MHz compatible CPU
2-port 10/100 Ethernet switch
1 x RS-232 serial port (3-wire)
Baud rate up to 115200 bps
16 KB EEPROM, 512 KB Flash/SRAM
Watchdog timer
DIN-rail mounting
-25-75C (special components required)
-40-80C storage temperature
5-95% RH non-condensing
8W total power consumption
64 x 120 x 110 mm

344.38 €
Item numberPROGR-DEVIC-SERVE-PORT-5
On the way in
Embedded CAN Bus Controller with DeviceNet, NXP SJA1000T, Isolated

NXP SJA1000T controller, 16MHz clock
1 x CAN bus port
Baud rate 125k/250k/500k
Supports DeviceNet protocol V1/V2
CAN 2.0A/2.0B, ISO-11898-2
Switchable 120 Ohm terminal resistor
3000VDC / 2500Vrms isolation
NS, RUN, MS status LEDs
Built-in watchdog timer
OS: Windows CE
Dimensions: 31 x 115 x 91 mm
-25/+75C (special components required)

294.80 €
Item numberEMBED-CAN-BUS-CONTR
On the way in
Serial Device Server with 4 x RS-232 / RS-485, PoE, -25 to 75°C

80186-80MHz compatible CPU
4 x RS-232, 1 x RS-485 ports
10/100Base-TX RJ-45 Ethernet
PoE IEEE 802.3af Class 1
Baud rate up to 115200bps
Bias resistor 1kOhm on RS-485
Watchdog timer
DIN-rail or wall mounting
-25/+75C (special components required)
12-48VDC via terminal block
72 x 35 x 123 mm (WxLxH)

414.06 €
Item numberSERIA-DEVIC-SERVE-RS-3
On the way in
3G/4G Cellular Gateway with GPS, RS-232/485, CAN Bus, RJ-45

ARM CPU with Watchdog Timer
3G/4G LTE Cellular Connectivity
GPS Support, NMEA 0183, 32 Channels
1 x RJ-45 10/100Base-T(X)
1 x RS-232, 1 x RS-485 Isolated
1 x RS-232 Console/Debug Port
CAN Bus Interface (CAN_H, CAN_L)
SD Card Slot, Max. 32GB SDHC
16KB EEPROM, 40 Years Retention
Metal Casing, DIN-Rail/Screw Mount
24VDC, 4.8W Consumption
117 x 126 x 58 mm

959.44 €
Item number3G-4G-CELLU-GATEW
On the way in
HART Gateway Module, 2/4-Wire HART Devices, Loop Power +30V, DIN-Rail

HART gateway, point to point
2-wire or 4-wire HART devices
Loop power +30V output
Isolation 2500VDC
Input impedance 250 Ohm +/-5%
Zero/span drift +/-0.1% FSR @25C
Response time 40ms @250 Ohm
Reverse polarity protection
Auxiliary supply 24V @20mA
Input range 10-30VDC
25 to 75C (special components required)
Dimensions 25 x 116 x 120 mm

321.60 €
Item numberHART-GATEW-MODUL-WIRE
On the way in
Programmable Modbus Gateway, RS-232/RS-485, DIN-Rail, -25-75°C

Modbus TCP/IP to RS-232/RS-485 gateway
80188 40MHz CPU, Watchdog Timer
1 x RJ-45 10Base-T Ethernet port
1 x RS-232, 1 x RS-485 serial port
Baud rate up to 115200 bps
5-digit 7-segment LED display
X-board I/O expansion support
Real time clock, 64-bit serial number
DIN-rail mounting
10-30VDC power input
72 x 123 x 33 mm (WxHxD)
-25-75C (special components required)

367.16 €
Item numberPROGR-MODBU-GATEW-RS-2
On the way in
Programmable Device Server, RS-232 to Ethernet, DIN-Rail

CPU 80186-80MHz compatible
2 x 10/100 Ethernet RJ-45
1 x RS-232 serial port, 5-wire
Up to 115200 bps
Auto MDI/MDI-X, LED indicator
EEPROM 16KB, 40-year retention
512KB Flash, 512KB SRAM
Watchdog timer
Reverse polarity protection
12-48VDC power input
72 x 118 x 35 mm
-25 to +75C operating temp

191.62 €
Item numberPROGR-DEVIC-SERVE-RS-9
On the way in
CANopen Embedded Controller, NXP SJA1000T, 2 Slots, DIN-Rail

NXP SJA1000T CAN controller, 16MHz
CiA 301 v4.02, CiA 401 v2.1 protocol
Baud rate 10k - 1M
32 RxPDO, 32 TxPDO
Node ID 1 - 255
Built-in 120 Ohm terminal resistor
3000VDC / 2500Vrms isolation
2 slots, DIN-rail or wall mount
PWR, RUN, ERR status LEDs
Real time clock, hardware watchdog
95 x 132 x 91 mm
-25~75C (special components required)

333.66 €
Item numberCANOP-EMBED-CONTR-NXP-2
On the way in
Programmable Device Server, 4x RS-232 & RS-485, 10/100 Ethernet

80186-80MHz compatible CPU
10/100 Base-TX RJ-45 Ethernet port
4x RS-232, 1x RS-485 serial ports
115200 bps max baud rate
16KB EEPROM, 512KB Flash, 512KB SRAM
Watchdog timer
Max 254 node addresses
DIN-rail or wall mounting
10-30VDC power input
72 x 35 x 123 mm (WxLxH)
-25 - +75C (special components required)

383.24 €
Item numberPROGR-DEVIC-SERVE-4X-5
On the way in
Showing 221-240 of 282 item(s)