Item number SERIA-DEVIC-SERVE-RS-3

Serial Device Server with 4 x RS-232 / RS-485, PoE, -25 to 75°C

80186-80MHz compatible CPU
4 x RS-232, 1 x RS-485 ports
10/100Base-TX RJ-45 Ethernet
PoE IEEE 802.3af Class 1
Baud rate up to 115200bps
Bias resistor 1kOhm on RS-485
Watchdog timer
DIN-rail or wall mounting
-25/+75C (special components required)
12-48VDC via terminal block
72 x 35 x 123 mm (WxLxH)

414.06 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power/PoE
Ports 4 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.2 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +12 ~ 48 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM5
Stop Bit 1, 2: for COM1 ~ COM5
Casing Plastic
Powered from PoE IEEE 802.3af, Class 1
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Serial Device Server

This serial device server connects RS-232 and RS-485 serial equipment to Ethernet networks, enabling remote monitoring and control of industrial devices. It is built for demanding environments and supports both PoE and terminal block power.


4 x RS-232 / 1 x RS-485 · 10/100 Base-TX Ethernet · PoE IEEE 802.3af · -25 to +75°C


Reliable Serial-to-Ethernet Connectivity

  • Multiple serial ports - connect up to five serial devices simultaneously
  • PoE support - power and data over a single Ethernet cable
  • Wide operating temperature - operates reliably from -25°C to +75°C
  • Watchdog timer - automatic recovery from system faults
  • Flexible mounting - DIN-rail or wall mounting for easy installation


Typical Applications

The device server is well suited for industrial automation environments where legacy serial equipment needs to be integrated into modern Ethernet networks.

  • Factory automation
  • Building management systems
  • Remote monitoring of PLCs and sensors
  • Data acquisition systems


A robust and flexible solution for bridging serial devices to Ethernet in demanding industrial environments.