Item number CAN-BUS-CONTR-MODUL

CAN Bus Controller Module with NXP SJA1000T, -25 to 75°C

NXP SJA1000T CAN controller, 16MHz
ISO-11898-2, CAN 2.0A/2.0B
Baud rate 10k - 1Mbps
Switchable 120 Ohm terminal resistor
Isolation 3000VDC / 2500Vrms
80186 CPU, 80MHz
512KB Flash, 512KB SRAM
16KB EEPROM
Watchdog timer
Power/CAN/Mode status LEDs
Dimensions: 31 x 91 x 115mm
-25 to 75C (special components required)

353.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186, 80 MHz or compatible
Controller NXP SJA1000T with 16 MHz clock
Flash 512 KB
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Driver I-8120W (for designing user-defined firmware), WinPAC, ViewPAC, XPAC, XPAC-CE6 (The XPAC series PAC only support one I-8120W)
Operating Temperature -25 ~ +75 °C
Terminal Resistor Switch for 120 Ω terminal resistor
SDK TC/BC/TC++/BC++, eVC++ 4.0, VC++ 2005, C#.net 2005, VB.net 2005
Watchdog Timer Watchdog IC
Status 1 x Power1 x CAN status1 x Operating mode
Consumption 1.5 W
Dimensions (mm) 31 x 91 x 115 (W x L x H)
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 10 k ~ 1 M bps
EEPROM 16 KB
SRAM 512 KB

Embedded CAN Bus Controller

This embedded CAN bus controller is designed to add a fully isolated CAN interface to industrial automation controllers. It handles CAN 2.0A and 2.0B communication independently, freeing the host CPU for other tasks. The module is built for continuous operation in demanding industrial environments.


NXP SJA1000T Controller · ISO-11898-2 Compliant · 3000VDC Isolation · -25 to 75°C Operation


Key Features

  • NXP SJA1000T controller - handles CAN 2.0A/2.0B protocol independently
  • Full isolation - 3000VDC DC-to-DC and 2500Vrms photo-coupling protect the host system
  • Adjustable baud rate - 10 kbps to 1 Mbps for flexible network configuration
  • Switchable terminal resistor - built-in 120 Ohm resistor simplifies bus termination
  • Wide operating range - rated from -25°C to 75°C for harsh environments


Typical Applications

The module suits industrial control systems where a reliable and isolated CAN connection is required.

  • Factory automation networks
  • Vehicle and mobile machinery control
  • Building and energy monitoring systems
  • Distributed I/O and sensor networks


A robust, isolated CAN interface built for reliable industrial communication.