Item number PROGR-DEVIC-SERVE-4X-5

Programmable Device Server, 4x RS-232 & RS-485, 10/100 Ethernet

80186-80MHz compatible CPU
10/100 Base-TX RJ-45 Ethernet port
4x RS-232, 1x RS-485 serial ports
115200 bps max baud rate
16KB EEPROM, 512KB Flash, 512KB SRAM
Watchdog timer
Max 254 node addresses
DIN-rail or wall mounting
10-30VDC power input
72 x 35 x 123 mm (WxLxH)
-25 - +75C (special components required)

383.24 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power5 x digit 7 Segment
Ports 4 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.7 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +10 ~ 30 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM5
Stop Bit 1, 2: for COM1 ~ COM5
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects legacy serial equipment to Ethernet networks, enabling remote monitoring and control of industrial devices. It combines multiple RS-232 and RS-485 ports with a robust industrial design suited for continuous 24/7 operation.


4x RS-232 & 1x RS-485 · 10/100 Base-TX Ethernet · -25 to +75C · DIN-rail mounting


Reliable Serial-to-Ethernet Connectivity

  • Multiple serial ports - 4x RS-232 and 1x RS-485 for connecting various devices
  • 10/100 Base-TX Ethernet - auto-negotiating with auto MDI/MDI-X support
  • Wide operating temperature - operates reliably from -25C to +75C
  • Built-in watchdog timer - ensures automatic recovery from system faults
  • Compact and durable design - plastic casing for DIN-rail or wall mounting


Typical Applications

The device server is well suited for industrial automation environments where serial devices need network access.

  • Factory automation and process control
  • Remote monitoring of PLCs and sensors
  • Building management systems
  • Utility and energy monitoring networks


A dependable choice for bridging serial devices to Ethernet in demanding industrial environments.