Item number PROGR-DEVIC-SERVE-8X

Programmable Device Server, 8x RS-232/485, 10/100 Ethernet, -25~75°C

Programmable Device Server, 8 Ports
6x RS-232 (3-wire), 1x RS-232 (5-wire)
1x RS-485, Baud rate up to 115200 bps
10/100 Base-TX Ethernet, RJ-45
CPU: 80186-80 MHz compatible
512 KB Flash, 512 KB SRAM, 16 KB EEPROM
Watchdog timer
DIN-rail or wall mounting
+10-30VDC power input
72 x 35 x 123 mm (W x L x H)
-25/75°C (special components required)
Humidity 5-90% RH non-condensing

418.08 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186-80 MHz or compatible
Flash 512 KB ; Erase unit is one sector (64 KB) ;100,000 erase/write cycles
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 ~ +75 °C
Watchdog Timer Yes
Status 1 x Power
Ports 6 x 3-wire RS-2321 x 5-wire RS-2321 x RS-48510/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Consumption 2.0 W
Dimensions (mm) 72 mm x 35 mm x 123 mm (W x L x H)
Storage Temperature -40 ~ +80 °C
Humidity 5 ~ 90% RH, Non-condensing
Powered from Terminal Block +10 ~ 30 VDC
Baud Rate 115200 bps Max.
Parity None, Even, Odd, Mark, SpaceNone parity is required when using 8 data bits and 2 stop bits on COM1/COM2.
Data Bit 7, 8: for COM1 and COM25, 6, 7, 8: for COM3 ~ COM8
Stop Bit 1, 2: for COM1 ~ COM8
Casing Plastic
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
SRAM 512 KB
Bias Resistor Yes, 1 KΩ
Node Address 254 (max.)

Programmable Device Server

This programmable device server connects multiple serial devices to an Ethernet network, providing flexible protocol conversion between RS-232, RS-422 and RS-485 interfaces. It is designed for industrial automation environments where reliable, long-term serial-to-Ethernet communication is required.


8 Serial Ports · 10/100 Base-TX Ethernet · -25 to 75°C Operation · DIN-Rail Mounting


Key Features

  • Flexible Serial Interfaces - supports RS-232, RS-422 and RS-485 on the same unit
  • High-Speed Ethernet - 10/100 Base-TX port with auto MDI/MDI-X
  • Robust Design - built-in watchdog timer for continuous uptime
  • Wide Temperature Range - operates from -25°C to +75°C
  • Flexible Installation - DIN-rail or wall mounting options


Typical Applications

The device server is well suited for industrial control and monitoring systems that need to bridge serial and Ethernet networks.

  • Factory automation networks
  • Building management systems
  • Remote monitoring stations
  • Legacy serial device integration


A reliable choice for connecting serial equipment to Ethernet networks in demanding industrial environments.