Item number CANOP-GATEW-MODBU-RTU

CANopen Gateway with Modbus RTU, RS-232/422/485, DIN-Rail

Modbus RTU to CAN/J1939 gateway
1 x RS-232, RS-422, RS-485 ports
Baud rates up to 115200 bps
CAN port 250k baud, ISO-11898-2
CAN 2.0A/2.0B compliant
3000VDC isolation, 2500Vrms optocoupler
120 ohm terminal resistor jumper
DIN-rail mounting
Power consumption 1.5W
108 x 72 x 35 mm
-25 to +75C operating temp
10-90% RH non-condensing

494.46 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Isolation 3000 VDC power protection on CAN side, 2500Vrms photo-couple isolation on CAN bus
Terminal Resistor Jumper for 120 Ω terminal resistor
Status PWR / J1939 / MODBUS
Ports 1 x RS-232(TXD, RXD, GND)1 x RS-422(Tx+, Tx-, Rx+, Rx-)1 x RS-485(D+, D-)1
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 9600, 19200, 38400, 57600, 115200250k
Protocol Modbus RTU

CANopen Gateway

This CANopen gateway converts Modbus RTU signals to CAN bus communication, supporting J1939 protocol status monitoring. It is designed for industrial automation systems that need reliable data exchange between serial devices and CAN networks.


Modbus RTU to CAN · RS-232/422/485 · ISO-11898-2 compliant · DIN-Rail mounting


Key features and specifications

  • Multi-protocol serial support - RS-232, RS-422 and RS-485 ports for flexible connectivity
  • High isolation - 3000VDC power protection and 2500Vrms opto-isolation on the CAN bus
  • CAN 2.0A/2.0B compliance - ensures compatibility with standard CAN devices
  • Adjustable termination - jumper-selectable 120 ohm terminal resistor
  • Wide operating range - functions reliably from -25C to +75C


Typical applications

The gateway is suitable for industrial control environments where serial and CAN-based devices must communicate.

  • Factory automation networks
  • Vehicle and machinery diagnostics using J1939
  • Building management systems
  • DIN-rail mounted control cabinets


A robust and isolated solution for connecting Modbus RTU devices to CAN and J1939 networks.