Item number DEVIC-COMMU-CONTR-DIN

DeviceNet Communication Controller with DIN-Rail Mount, -25 to 75°C

DeviceNet communication controller
NXP SJA1000T CAN controller, 16MHz
CPU 80186, 80MHz compatible
Baud rates 125k/250k/500k
Node ID range 0-63
Isolation 3000VDC / 2500Vrms
120 Ohm terminal resistor jumper
DIN-rail mounting
Watchdog IC, RTC included
10-30VDC power input
64 x 119 x 91 mm
-25-75C (special components required)

313.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

CPU 80186, 80 MHz or compatible
Controller NXP SJA1000T with 16 MHz clock
Flash 512 KB
Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Operating Temperature -25 ~ +75 ℃
Terminal Resistor Jumper for 120 Ω terminal resistor
Real Time Clock Yes
Watchdog Timer Watchdog IC
Status 1 x Power2 x DeviceNet status
Ports 1
Input Range +10 VDC ~ +30 VDC
Consumption 1.7 W
Dimensions (mm) 64 x 119 x 91 (W x L x H)
Storage Temperature -30 ~ +80 ℃
Humidity 10 ~ 90% RH, Non-condensing
Slots 1 slots
Specification Volume I, Release 2.0 & Volume II, Release 2.0
Baud Rate 125 k, 250 k, 500 k
EEPROM 16 KB
NVRAM 31 bytes (battery backup, data valid for up to 10 years)
SRAM 512 KB
Node ID 0 ~ 63
Connection Supported 1 connection for Explicit Messaging1 connection for Polled I/O1 connection for Bit-Strobe I/O1 connection for COS/Cyclic I/O
Shutdown Message Yes
Subscribe Group 2 Only Server

DeviceNet Communication Controller

This DeviceNet communication controller is an embedded CAN bus interface module designed for industrial automation networks. It provides reliable protocol handling, isolation and DIN-rail mounting for demanding control environments.


NXP SJA1000T CAN Controller · 80186 CPU, 80MHz · DIN-Rail Mounting · -25C to +75C Operation


Built for Reliable Industrial Communication

  • CAN controller - NXP SJA1000T with 16MHz clock for stable bus timing
  • Multiple baud rates - supports 125k, 250k and 500k for network flexibility
  • Galvanic isolation - 3000VDC and 2500Vrms protect connected equipment
  • Watchdog and RTC - watchdog IC and real time clock improve uptime
  • Wide temperature range - operates from -25C to +75C (special components required)


Where It Is Used

The controller fits into DeviceNet based automation systems that need a compact, DIN-rail mounted communication node.

  • Factory automation networks
  • Process control panels
  • Machine builder control cabinets
  • Distributed I/O systems


A robust and isolated DeviceNet controller built for continuous industrial operation.