Item number RS-232-CAN-CONVE

RS-232 to CAN Converter with Isolation, DIN-Rail

RS-232 to CAN converter module
CAN 2.0A/B, ISO-11898-2
Baud rate: 10 kbps - 1 Mbps
3000VDC / 2500Vrms isolation
Selectable 120 ohm terminator
CAN receive buffer: 1000 frames
DIN-rail mount, plastic casing
+10 to +30VDC input
72 x 118 x 33 mm
-25~75C (special components required)

246.56 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Operating Temperature -25 ~ +75 °C
Terminal Resistor Selectable 120Ω terminal resistor by jumper
Status 1 x Power1 x CAN status
Ports 11 x RS-232 (9-pin female D-Sub (TxD, RxD, GND))
Input Range +10 VDC ~ +30 VDC
Consumption 1 W
Dimensions (mm) 72 x 118 x 33 (W x L x H)
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing
Specification ISO-11898-2, CAN 2.0A and CAN 2.0B
Baud Rate 10 k ~ 1 M bps110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
Parity None, Even, Odd
Data Bit 5, 6, 7, 8
Stop Bit 1, 2
Casing Plastic
Receive Buffer 900 data frames1000 data frames
Filter Yes

RS-232 to CAN Converter Module

This RS-232 to CAN converter module converts a standard serial RS-232 signal into an isolated CAN bus interface. It is designed for industrial automation systems that need to bridge legacy serial devices with a CAN 2.0A/B network.


CAN 2.0A/B · 3000VDC Isolation · DIN-Rail Mount · -25 to 75C Operation


Reliable Data Conversion Features

  • Galvanic isolation - protects equipment from voltage spikes and ground loops
  • Selectable terminal resistor - simplifies CAN bus termination via jumper
  • Large receive buffers - up to 1000 CAN and 900 serial data frames
  • Wide baud rate range - supports 10 kbps to 1 Mbps on the CAN side
  • Wide operating temperature - runs reliably from -25C to +75C


Typical Industrial Applications

The converter fits environments where robust, isolated communication between serial and CAN networks is required.

  • Factory automation and PLC integration
  • Building management systems
  • Vehicle and machine control networks
  • Remote monitoring and data acquisition


A dependable choice for connecting RS-232 devices to CAN networks in harsh industrial environments.