Item number UNMAN-ETHER-SWITC-1X-4

Unmanaged Ethernet Switch, 1x RJ45 10/100 to 1x 100Base-FX Fiber SC

1 x RJ-45 10/100Base-TX port
1 x 100Base-FX fiber SC port
Multi-mode, up to 2km distance
Wavelength 1300/1310nm
Store and forward wire speed switching
MAC table 1024, 256Kbit frame buffer
IEEE 802.3x flow control
1500Vrms isolation, reverse polarity protection
DIN-rail mounting, plastic casing
12-48VDC input, 0.12A @ 24VDC
33 x 107 x 78 mm (W x L x H)
-30C to +75C (special components required)

203.68 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ports 1 x RJ-45, 10/100Base-TX1 x 100 Base-FX, SC connector
Input Range +12 VDC ~ +48 VDC (Non-isolation)
Consumption 0.12 A @ 24 VDC
Dimensions (mm) 33 x 107 x 78 (W x L x H)
Storage Temperature 30 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
Mode Multi-Mode
Casing Plastic
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 1024
Memory Bandwidth 1.4 Gbps
Frame Buffer Memory 256 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch converts between a 10/100Base-TX RJ-45 copper port and a 100Base-FX fiber port with SC connector. It is built for industrial environments where reliable data transmission over long distances is required.


1 x RJ-45 10/100Base-TX · 1 x 100Base-FX SC Multi-Mode · Up to 2 km · 12-48VDC


Features that ensure reliable operation

  • Fiber conversion - bridges copper networks with fiber runs up to 2 km
  • Store and forward - wire speed switching for efficient data handling
  • Flow control - IEEE 802.3x and back pressure prevent data loss
  • High isolation - 1500 Vrms protects against electrical interference
  • Rugged design - operates from -30°C to +75°C


Application areas

The switch is well suited for industrial network installations that need to bridge copper and fiber infrastructure.

  • Factory automation
  • Distributed monitoring systems
  • Industrial control networks
  • Long distance network extension


A rugged and simple solution for connecting copper and fiber networks in demanding industrial environments.