Item number UNMAN-POE-SWITC-4X

Unmanaged PoE Switch 4x 10/100 RJ45 PoE, 1x 100Base-FX ST Fiber

4 x 10/100Base-TX RJ45, PoE
1 x 100Base-FX ST Fiber
IEEE 802.3af PoE, up to 15.4W/ch
Multi-Mode Fiber, up to 2km
Store and forward switching
MAC Table 1024, 3.2Gbps bandwidth
Metal casing, DIN-Rail mount
IP30, ESD 4kV protection
18-32VDC input
-30C to +75C (special components required)
25 x 168 x 133 mm

363.14 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, ST connector4 x RJ-45, 10/100Base-TX
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;3.2 A @ 24 VDC with PD full loading;4.6 A @ 18 VDC with PD full loading
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is designed for industrial networks requiring both PoE power delivery and long-distance fiber connectivity. It combines rugged operation with simple plug-and-play installation, allowing network equipment to be connected quickly without configuration.


4 x PoE RJ45 ports · 1 x 100Base-FX Fiber · IP30 metal housing · DIN-Rail mounting


Reliable performance in industrial environments

  • PoE power delivery - supplies up to 15.4W per port to connected devices
  • Fiber connectivity - supports distances up to 2 km via multi-mode fiber
  • Rugged housing - metal casing with IP30 protection against dust and particles
  • Wide temperature range - operates reliably from -30°C to +75°C
  • ESD protection - withstands electrostatic discharge up to 4 kV


Application areas

The switch is well suited for industrial installations where stable network connectivity and equipment power supply are critical.

  • Surveillance systems with PoE cameras
  • Factory automation and production lines
  • Distributed networks with fiber backbone
  • Outdoor or harsh industrial environments


A rugged and space-saving solution for reliable PoE and fiber connectivity in demanding industrial networks.