Item number PORT-UNMAN-POE-SWITC-5

5-Port Unmanaged PoE Switch, 4x RJ45 + 1x SC Fiber 60km, 18-32VDC

4 x RJ45 10/100Base-TX PoE ports
1 x 100Base-FX SC Single-Mode port
PoE up to 15.4W per port, 802.3af
Fiber distance up to 60 km
Wavelength 1300/1310nm
Store and forward switching
MAC table 1024, buffer 512 Kbit
Metal casing, DIN-Rail mounting
IP30, ESD 4kV contact
18-32VDC
-30C to +75C (special components required)
25 x 168 x 133 mm

406.02 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;3.2 A @ 24 VDC with PD full loading;4.6 A @ 18 VDC with PD full loading
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is built for industrial networks that require reliable data transmission over long distances. With built-in PoE and a fiber port, the device links local PoE equipment to a fiber backbone across large distances.


4 x RJ45 PoE ports · 1 x SC Single-Mode fiber port · Up to 60 km range · 18-32VDC input


Features that make the difference

  • PoE on every port -powers connected devices with up to 15.4W each
  • Long fiber range -up to 60 km using single-mode fiber
  • Rugged metal housing -protects against dust and moisture (IP30)
  • DIN-rail mounting -easy installation in cabinets and panels
  • Wide operating temperature -reliable in demanding environments


Applications

The switch is well suited for industrial installations where Ethernet devices need to be connected over long distances via fiber.

  • PoE surveillance cameras
  • Industrial factory networks
  • Traffic and infrastructure control
  • Remote measurement equipment


A rugged and reliable solution for building fiber-based PoE networks in industrial environments.