Item number PORT-UNMAN-POE-SWITC-6

5-Port Unmanaged PoE Switch 4x 10/100Base-TX, 1x 100Base-FX Fiber SC, DIN-Rail 18-32VDC

4 x 10/100Base-TX RJ45, PoE af
1 x 100Base-FX SC Fiber, Multi-Mode
PoE up to 15.4W per port
Fiber distance up to 2 km
Store and forward switching
MAC table 1024, 3.2 Gbps bandwidth
Frame buffer memory 512 Kbit
IEEE 802.3, 802.3u, 802.3x, 802.3af
DIN-Rail mounting, plastic casing
18-32VDC input
31 x 157 x 113 mm
-30C to 75C (special components required)

310.88 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, SC connector4 x RJ-45, 10/100Base-TX
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;3.2 A @ 24 VDC with PD full loading;4.6 A @ 18 VDC with PD full loading
Dimensions (mm) 31 x 157 x 113 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Plastic
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require stable data transfer and extended reach via fiber optics. It combines PoE power delivery to connected devices with a fiber port for reliable long-distance communication.


4 x PoE RJ45 · 1 x 100Base-FX Fiber · DIN-Rail Mounting · 18-32VDC


Features that ensure stable operation

  • PoE power - up to 15.4W per port for cameras and access points
  • Fiber port - stable connection up to 2 km via SC connector
  • Automatic PoE detection - protects connected devices from overload
  • Flow control - reduces data loss under heavy traffic loads
  • Rugged housing - suitable for DIN-rail mounting in industrial environments


Application areas

The switch is well suited for industrial installations where network equipment must be placed over long distances or in harsh environments.

  • Surveillance systems with IP cameras
  • Industrial automation and production facilities
  • Building-to-building network connections via fiber
  • Remote access points and sensors


A rugged and reliable solution for industrial networks requiring PoE and fiber connectivity.