Item number PORT-ETHER-SWITC-6X

8-Port Ethernet Switch 6x RJ45 100Base-TX, 2x Single-Mode Fiber 60km

6 x RJ45 10/100Base-TX
2 x 100Base-FX Single-Mode Fiber
Fiber distance up to 60 km
Wavelength 1300/1310 nm
Store and forward wire speed switching
VLAN, QoS, Port Trunk, STP, Ring
3 x Digital Input, 3 x Digital Output
1 x RS-232 Console, 1 x RS-485
Relay alarm output 2A @ 30VDC
12-48VDC redundant dual inputs
-30 to 75C (special components required)
IP30, DIN-rail or wall mounting

938.00 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

DIP Switch Yes, Normal Run / Repair Mode
Installation DIN-rail mounting or wall mounting
Isolation 1500 Vrms 1 minute
Type Wet ContactOpen Collector
Operating Temperature 30 °C ~ +75 °C
Status 10/100M, Link/Act, Full duplex/Half duplex (Fiber Port)
Ports 2-port 100 Base-FXSC connector1 x RS-232 (Console)1 x RS-4856 x RJ-45, 10/100Base-TX
Input Range +12 VDC ~ +48 VDC Redundant Dual Inputs (Non-isolated)
Redundant Power Inputs Yes
Consumption 0.3 A @ 24 VDC
Dimensions (mm) DIN-rail mounting: 47 x 175 x 142 (W x L x H)Wall mounting: 51 x 190 x 142 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10 ~ 90% RH, Non-condensing
Reverse Polarity Protection Yes
Channels 3
Sink/Source (NPN/PNP) Sink (NPN)
ON Voltage Level +19 VDC ~ +30 VDC
OFF Voltage Level +11 VDC Max.
Load Current 30V/100 mA Max.
Protocol VLAN, QoS, Port Trunk, SMTP, TELNET
Mode Single-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 35 dBm
Standards IEEE 802.3, 802.3u and 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Redundant Strategy STP, Ring
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 60 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output 5 dBm Min.0 dBm Max.

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require long-distance fiber connectivity combined with reliable copper connections. It combines 10/100Base-TX ports with single-mode fiber ports capable of bridging distances up to 60 km, making it well suited for demanding automation and monitoring applications.


6x RJ45 10/100Base-TX · 2x Single-Mode Fiber 60 km · 12-48VDC Redundant · -30 to 75°C


Rugged Design for Critical Operation

  • Redundant power inputs - two inputs ensure continuous operation
  • Ring redundancy (STP/Ring) - fast failover during network faults
  • Digital I/O - 3 inputs and 3 outputs for monitoring and control
  • Alarm relay output - notifies operators of critical events
  • Wide temperature range - reliable operation from -30°C to +75°C


Application Areas

The switch is ideal for industrial environments where long distances and high reliability are essential.

  • Factory automation
  • Traffic control and monitoring
  • Remote metering systems
  • Power infrastructure


A rugged and reliable solution for industrial networks requiring long fiber reach and high operational reliability.