Item number PORT-UNMAN-SWITC-POE

5-Port Unmanaged Switch with PoE, 4x RJ45 + 1x 100Base-FX Fiber SC

4 x 10/100Base-TX RJ45 PoE ports
1 x 100Base-FX SC fiber port
IEEE 802.3af PoE, up to 15.4W/ch
Multi-mode fiber, up to 2km
Store and forward switching
MAC table 1024, 3.2 Gbps bandwidth
Metal casing, DIN-rail mounting
IP30 rated enclosure
-30C to +75C (special components required)
Input range +46 ~ +55VDC
25 x 168 x 133 mm

329.64 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 4 x RJ-45, 10/100Base-TX1 x 100 Base-FX, SC connector
Input Range +46 ~ +55 VDC for PoE output
Consumption 0.08 A @ 48 VDC without PD loading;1.5 A @ 48 VDC with PD full loading
Dimensions (mm) 25 x 168 x 133 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Voltage +48 VDC depending on power input
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is designed for industrial networks that require a combination of copper and fiber connections with Power over Ethernet. It is well suited for rugged installations where stability and long-distance transmission are essential.


4x RJ45 PoE ports · 1x 100Base-FX fiber · IEEE 802.3af PoE · DIN-rail mounting


Key features and benefits

  • PoE power delivery - supplies up to 15.4W per channel to connected devices
  • Fiber connectivity - enables connections up to 2km via multi-mode fiber
  • Store and forward switching - ensures reliable data transmission
  • Rugged metal housing - protects against dust and moisture with IP30 rating
  • Wide operating temperature - performs reliably from -30C to +75C


Typical applications

The switch is suitable for industrial environments where network connections need to span long distances or operate under demanding conditions.

  • Factory automation
  • Surveillance systems with IP cameras
  • Traffic control and infrastructure
  • Remote installations requiring fiber connectivity


A robust and reliable solution for industrial networks requiring both copper and fiber connectivity.