Item number UNMAN-FIBER-MEDIA-CONVE

Unmanaged Fiber Media Converter Switch, 1x RJ45 10/100 to 1x 100Base-FX SC, Single-Mode 60km

1 x RJ-45 10/100Base-TX port
1 x 100Base-FX SC, Single-Mode
Fiber distance up to 60 km
Wavelength 1300/1310nm
Store and forward wire speed
MAC table 1024 entries
Memory bandwidth 1.4 Gbps
IEEE 802.3, 802.3u, 802.3x
1500 Vrms isolation, 1 min
DIN-Rail mounting, plastic case
33 x 107 x 78 mm
12-48VDC, 0.12A @ 24VDC

298.82 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ports 1 x 100 Base-FX, SC connector1 x RJ-45, 10/100Base-TX
Input Range +12 VDC ~ +48 VDC (Non-isolation)
Consumption 0.12 A @ 24 VDC
Dimensions (mm) 33 x 107 x 78 (W x L x H)
Storage Temperature 30 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
Mode Single-Mode
Casing Plastic
RX Sensitivity 35 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 1024
Memory Bandwidth 1.4 Gbps
Frame Buffer Memory 256 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125μm
Distance 60 km
Wavelength 1300 or 1310nm
TX Output 5 dBm Min.0 dBm Max.
RX Overload 5 dBm
Budget 30 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch converts between copper and fiber and is used to extend Ethernet networks over long distances via single-mode fiber. It is well suited for industrial installations requiring reliable signal transmission over great distances.


1x RJ-45 10/100Base-TX · 1x 100Base-FX SC Single-Mode · Up to 60 km · 12-48VDC


Features for stable operation

  • Store & forward -ensures error-free data transfer with wire speed switching
  • Flow control -IEEE 802.3x and back pressure prevent data loss under heavy load
  • Galvanic isolation -1500 Vrms protects against voltage surges
  • Reverse polarity protection -protects against incorrect power connection
  • DIN-rail mounting -easy installation in industrial cabinets


Applications in industrial networks

The switch fits tasks where network signals need to be transported over long distances with high reliability.

  • Factory automation
  • Surveillance systems
  • Building management
  • Remote controlled facilities


A robust solution for building reliable fiber-based networks over long distances.