Item number PORT-UNMAN-POE-SWITC-7

5-Port Unmanaged PoE Switch 4x RJ45 100Mbit, 1x 100Base-FX Fiber ST, DIN-Rail 18-32VDC

4 x 10/100Base-TX RJ45 PoE ports
1 x 100Base-FX fiber ST port
Up to 15.4W PoE per channel
802.3af PoE compliant
Multi-mode fiber up to 2km
Store and forward switching
1024 MAC address table
IEEE 802.3x flow control
1500 Vrms isolation
DIN-rail mounting, plastic casing
18-32VDC input
31 x 157 x 113 mm

310.88 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status Power, Link/Act, Power Device is detected
Ports 1 x 100 Base-FX, ST connector4 x RJ-45, 10/100Base-TX
Input Range +18 ~ +32 VDC
Consumption 0.24 A @ 24 VDC without PD loading;3.2 A @ 24 VDC with PD full loading;4.6 A @ 18 VDC with PD full loading
Dimensions (mm) 31 x 157 x 113 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Plastic
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm
PoE Compliance 100% IEEE 802.3af compliant
PoE Power Up to 15.4 watts per channel
PoE Pin Assignments V+ (Pin 1,2), V- (Pin 3,6)
PoE Operation Automatic detection and power management
PoE Disconnect Mode DC disconnect

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require both PoE power delivery and long-distance fiber connectivity. It combines 10/100Base-TX RJ45 ports with a 100Base-FX fiber port, making it suitable for building robust and flexible network setups.


4 x RJ45 PoE Ports · 1 x Fiber ST Port · Up to 15.4W PoE · DIN-Rail Mounting


Features for reliable operation

  • Per-port PoE -delivers up to 15.4W with automatic detection
  • Fiber connectivity -supports distances up to 2km in full duplex
  • Flow control -IEEE 802.3x and back pressure prevent data loss
  • High isolation -1500 Vrms protects against electrical interference
  • Compact design -plastic housing for easy DIN-rail mounting


Application areas

The switch fits industrial and commercial installations where PoE devices need to be connected over longer distances via fiber.

  • PoE surveillance cameras
  • Access control systems
  • Industrial automation networks
  • Networks requiring electrical isolation


A reliable and compact solution for connecting PoE devices over fiber in demanding environments.