Item number UNMAN-ETHER-SWITC-1X-3

Unmanaged Ethernet Switch, 1x RJ45 to 1x 100Base-FX SC Single-Mode, 15km

1 x RJ45 10/100Base-TX port
1 x 100Base-FX SC fiber port
Single-mode, up to 15 km
Wavelength TX 1550 / RX 1310 nm
Store and forward wire speed switching
MAC table 1024 entries
Memory bandwidth 1.4 Gbps
1500 Vrms isolation, 1 minute
DIN-rail mounting, plastic casing
12-48VDC, reverse polarity protection
0C to 70C operating temperature
33 x 107 x 85 mm (W x L x H)

269.34 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 0 °C ~ +70 °C
Status PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ports 1 x 100 Base-FX, SC connector1 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Non-isolation)
Consumption 0.12 A @ 24 VDC, +/- 5% arrowed with 100M Full duplex
Dimensions (mm) 33 x 107 x 85 (W x L x H)
Storage Temperature 20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) Yes
Mode Single-Mode
Casing Plastic
RX Sensitivity 31 dBm
Standards IEEE802.3, 802.3u, 802.3x
Processing Type Store & forward wire speed switching
MAC Table 1024
Memory Bandwidth 1.4 Gbps
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 15 km, (9/125 μm mrecommended) for full duplex
Wavelength TX: 1550, RX: 1310 nm
TX Output 14 dBm Min.-8 dBm Max.

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch converts between copper and fiber and is used to connect industrial networks over long distances with high noise immunity. The switch is suitable for demanding industrial installations where reliable data transmission is essential.


1 x RJ45 10/100Base-TX · 1 x 100Base-FX SC Single-Mode · Up to 15 km · DIN-Rail mounting


Features that make the difference

  • Fiber connectivity - single-mode fiber enables reach up to 15 km
  • Store and forward switching - ensures stable data transfer at wire speed
  • Galvanic isolation - 1500 Vrms isolation protects against noise and voltage differences
  • Robust design - plastic casing for DIN-rail mounting in industrial environments
  • Wide voltage input - operates on 12-48VDC with reverse polarity protection


Applications

The switch is suitable for industrial networks where copper links need to be extended with fiber over long distances.

  • Factory automation
  • Building installations with long cable runs
  • Surveillance and security systems
  • Process and production plants


A reliable solution for bridging copper and fiber networks in industrial environments.