Item number UNMAN-ETHER-SWITC-1X

Unmanaged Ethernet Switch 1x RJ45 10/100 to Single-Mode Fiber SC, 30km

1 x RJ-45 10/100Base-TX
1 x 100Base-FX SC, Single-Mode
Fiber distance up to 30 km
IEEE 802.3, 802.3u, 802.3x
Store and forward switching
MAC table 1024 entries
Memory bandwidth 1.4 Gbps
Isolation 1500 Vrms 1 min
DIN-Rail mounting, plastic casing
12-48VDC, 0.12A @ 24VDC
33 x 107 x 78 mm
-30C to +75C (special components required)

219.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR, 10M, 100M, Link/Act, Full duplex/Half duplex(Fiber Port)
Ports 1 x RJ-45, 10/100Base-TX1 x 100 Base-FX, SC connector
Input Range +12 VDC ~ +48 VDC (Non-isolation)
Consumption 0.12 A @ 24 VDC
Dimensions (mm) 33 x 107 x 78 (W x L x H)
Storage Temperature 30 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward, wire speed switching
MAC Table 1024
Memory Bandwidth 1.4 Gbps
Frame Buffer Memory 256 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125μm
Distance 30 km
Wavelength 1300 or 1310nm
TX Output 15 dBm Min.-8 dBm Max.
RX Overload 5 dBm
Budget 19 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch converts between RJ-45 copper and single-mode fiber, allowing Ethernet signals to be transmitted over long distances without performance loss. It is well suited for industrial installations where noise immunity and long range are essential.


1 x RJ-45 10/100Base-TX · 1 x 100Base-FX SC · Up to 30 km · DIN-Rail mounting


Features that make the difference

  • Fiber optic reach - supports distances up to 30 km via single-mode fiber
  • Electrical isolation - 1500 Vrms protects against noise and voltage differences
  • Store and forward switching - stable data transfer with error filtering
  • Rugged enclosure - compact plastic housing for DIN-rail mounting
  • Wide power input - operates on 12-48VDC with low power consumption


Application areas

The switch fits industrial networks where copper and fiber need to be reliably connected.

  • Factory automation
  • Long-distance building networks
  • Surveillance and security systems
  • Infrastructure in demanding environments


A robust and simple solution for bridging copper and fiber networks over long distances.