Item number PORT-UNMAN-ETHER-SWITC-19

5-Port Unmanaged Ethernet Switch, 4x RJ45 + 1x 100Base-FX ST Fiber

4 x RJ45 10/100Base-TX ports
1 x 100Base-FX ST fiber port
Multi-mode, up to 2km distance
Store and forward switching
MAC table 2048, 1 Mbit buffer
IEEE 802.3x flow control
Redundant power input, reverse polarity protection
Relay alarm output 2A @ 30VDC
Metal casing, DIN-rail mount, IP30
12-48VDC redundant input
-30C to +75C (special components required)
25 x 168 x 131 mm

300.16 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 1 x 100 Base-FX, ST connector4 x RJ-45, 10/100Base-TX
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm

Unmanaged Ethernet Switch

This unmanaged Ethernet switch is designed for industrial networks that require a combination of copper and fiber connections. It provides a robust and reliable solution for long-distance data transmission via fiber optics, while still supporting standard Ethernet equipment through its RJ45 ports.


4x RJ45 10/100Base-TX · 1x 100Base-FX Fiber (ST) · 12-48VDC redundant input · -30C to +75C


Features that ensure stable operation

  • Fiber port -enables data transmission up to 2 km
  • Redundant power input -increases reliability during power failure
  • Alarm relay -notifies of faults via relay output
  • Metal casing with IP30 -protects against dust and physical impact
  • Wide operating temperature -reliable performance in demanding environments


Applications in industrial networks

The switch is well suited for installations where copper networks need to connect to fiber-based backbone connections.

  • Factory automation
  • Monitoring and security systems
  • Building installations over long distances
  • Transport and infrastructure projects


A robust and flexible switch for industrial environments where stable long-distance data transmission is essential.