Item number PORT-UNMAN-SWITC-8X

9-Port Unmanaged Switch 8x 10/100 RJ45, 1x 100Base-FX SC Single-Mode, DIN-Rail

8 x 10/100 Base-TX RJ45 ports
1 x 100 Base-FX SC, Single-Mode
Fiber distance up to 30 km
Wavelength 1300/1310 nm
Store and forward wire speed switching
MAC table 2048, buffer 512 Kbit
IEEE 802.3x flow control
ESD protection 4 kV contact
DIN-Rail mounting, plastic casing
12-48VDC, 0.26A @ 24VDC
10C to 75C operating temperature
64 x 118 x 101 mm

478.38 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 10 °C ~ +75 °C
Status Power, Link/Act, 10/100M, Full duplex/Half duplex (Fiber Port)
Ports 8 x RJ-45, 10/100 Base-TX1 x 100 Base-FX, SC connector
Input Range +12 ~ +48 VDC
Consumption 0.26 A @ 24 VDC
Dimensions (mm) 64 x 118 x 101 (W x L x H)
Storage Temperature 20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Single-Mode
Casing Plastic
RX Sensitivity 34 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Table 2048
Memory Bandwidth 2.0 Gbps
Frame Buffer Memory 512 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Fiber Cable 8.3/125, 8.7/125, 9/125 or 10/125 μm
Distance 30 km, (9/125 μm recommended) for full duplex
Wavelength 1300 or 1310 nm
TX Output 15 dBm Min.-8 dBm Max.

Unmanaged Ethernet Switch with Fiber Port

This unmanaged switch is designed for industrial networks that require combining copper and fiber connections. It combines 8 RJ-45 ports with a Single-Mode fiber port, making it ideal for building robust networks over long distances. The switch is intended for DIN-rail mounting in cabinets and industrial installations.


8x 10/100 RJ45 · 1x 100Base-FX SC Single-Mode · Up to 30 km · 12-48VDC


Features that make the difference

  • Fiber port - enables longer distances up to 30 km via Single-Mode fiber
  • Store and forward switching - ensures stable and reliable data transfer
  • Flow control - IEEE 802.3x and back pressure prevent data loss
  • Wide voltage input - operates with 12-48VDC power supply
  • Rugged design - ESD protection and reverse polarity protection


Application areas

The switch is well suited for industrial environments where copper and fiber networks need to be connected reliably.

  • Factory automation
  • Building installations with long cable distances
  • Surveillance systems
  • Process and control networks


The right solution when copper and fiber networks need to be connected reliably over long distances.