Item number PORT-UNMAN-ETHER-SWITC-21

6-Port Unmanaged Ethernet Switch, 4x 10/100Base-TX, 2x 100Base-FX ST

4 x 10/100Base-TX RJ45 ports
2 x 100Base-FX ST, Multi-Mode
Fiber distance up to 2 km
Store and forward processing
MAC table 2048, 1 Mbit buffer
IEEE 802.3x flow control
Redundant power with alarm relay
Metal casing, IP30, DIN-Rail
12-48VDC redundant input
-30C to +75C (special components required)
25 x 168 x 131 mm (W x L x H)

371.18 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 4 x RJ-45, 10/100Base-TX2 x 100 Base-FX, ST connector
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is built for industrial networks that require a combination of copper and fiber connections. It is used to extend network reach over long distances via fiber optics while maintaining a stable connection to local devices through RJ-45 ports.


4 x 10/100Base-TX · 2 x 100Base-FX ST · Redundant 12-48VDC · -30°C to +75°C


Rugged design for demanding environments

  • Fiber optic connectivity - supports up to 2 km distance with Multi-Mode fiber
  • Redundant power input - dual voltage inputs for high reliability
  • Alarm relay - notifies in case of power failure or fault
  • Metal casing with IP30 - protects against dust and mechanical stress
  • DIN-Rail mounting - easy installation in industrial cabinets


Applications

The switch is suitable for industrial installations where copper and fiber networks need to be connected reliably.

  • Factory automation
  • Transportation and traffic control systems
  • Surveillance networks
  • Process and building automation


A rugged and reliable solution for industrial networks requiring both copper and fiber connectivity.