Item number PORT-UNMAN-ETHER-SWITC-20

6-Port Unmanaged Ethernet Switch, 4x RJ45, 2x 100Base-FX SC Multi-Mode Fiber

4 x 10/100Base-TX RJ45 ports
2 x 100Base-FX SC fiber ports
Multi-mode, up to 2km distance
Store and forward processing
MAC table: 2048 entries
IEEE 802.3x flow control
Redundant power input
Alarm relay output 2A/30VDC
Metal casing, IP30, DIN-rail
12-48VDC redundant input
-30C to +75C (special components required)
25 x 168 x 131 mm

353.76 €
Excl. VAT
Quantity
On the way in
file_download DOWNLOADS

Specifications

Installation DIN-Rail Mounting
Isolation 1500 Vrms 1 minute
Operating Temperature 30 °C ~ +75 °C
Status PWR1, PWR2, PWR_Fault, Link/Act, 10/100M
Ports 4 x RJ-45, 10/100Base-TX2 x 100 Base-FX, SC connector
Input Range +12 ~ +48 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.14 A @ 24 VDC
Dimensions (mm) 25 x 168 x 131 (W x L x H)
Storage Temperature 40 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing
Reverse Polarity Protection Yes
ESD (IEC 61000-4-2) ± 4 kV Contact
Mode Multi-Mode
Casing Metal
Ingress Protection Rating IP30
RX Sensitivity 32 dBm
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward
MAC Table 2048
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Alarm Output Yes,Relay 2 A @ 30 VDC
Fiber Cable 50/125, 62.5/125 or 100/140 μm
Distance 2 km, (62.5/125 μm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output 20 dBm Min.-14 dBm Max.
RX Overload 8 dBm
Budget 12 dBm

Unmanaged Ethernet Switch with Fiber Port

This unmanaged Ethernet switch is designed for industrial networks that require stable data transmission over long distances. It combines copper and fiber connections and is well suited for demanding environments with high reliability requirements.


4 x RJ-45 10/100Base-TX · 2 x 100Base-FX Fiber · Redundant 12-48VDC · -30C to +75C


Rugged features for industrial use

  • Fiber ports - enable data transmission up to 2 km via multi-mode fiber
  • Redundant power input - ensures continuous operation if one power source fails
  • Alarm relay - alerts on power failure or fault conditions
  • Metal casing - protects the electronics in harsh industrial environments
  • Wide temperature range - reliable operation from -30C to +75C


Applications

The switch is well suited for installations where long distances and robustness are essential for the network connection.

  • Factory automation
  • Traffic control systems
  • Surveillance networks
  • Process control plants


A reliable solution for industrial networks where stability and long range matter most.